This is for the parts below which will give you the bulk of what you need to build a Challenger 2 TES Megatron. All I would say it needs, apart from your time and effort, would be some metal gearboxes and the electronics - I was going to put a Clark into it and do have a spare Leo 2 one that I was going to use.
The pictures below show everything included, these being.
- Basic Heng Long Challenger 2 complete with the bags of parts that come with it. The turret has an airsoft and barrel elevation unit in it and the turret rotation unit is also fitted. It has plastic gears and the lights are still fitted but everything else was removed in preparation for the build as I was going to do it.
Metal Wheels.
Metal Suspension arms
Metal Tracks with rubber pads
Metal hull strengthening kit. This will stiffen up the hull to make it stronger for the metal running gear.
Full 3D printed Challenger TES Megatron Armour kit. This is nicely done and comes with instructions. I cannot recall where I bought it from but I am sure somebody looking will know.
- 20240101_162154.jpg (2.49 MiB) Viewed 89144 times
- 20240101_162203.jpg (2.27 MiB) Viewed 89144 times
- 20240101_162207.jpg (2.46 MiB) Viewed 89144 times
- 20240101_162210.jpg (2.86 MiB) Viewed 89144 times
- 20240101_162214.jpg (2.63 MiB) Viewed 89144 times
- 20240101_162217.jpg (2.02 MiB) Viewed 89144 times
- 20240101_162220.jpg (1.85 MiB) Viewed 89144 times
- 20240101_162320.jpg (2.74 MiB) Viewed 89144 times
- 20240101_162353.jpg (2.49 MiB) Viewed 89144 times
- 20240101_162433.jpg (2.55 MiB) Viewed 89144 times
- 20240101_162437.jpg (2.23 MiB) Viewed 89144 times
- 20240101_162440.jpg (2.39 MiB) Viewed 89144 times
If you are interested in the Leo 2 Clark TK22 let me know and I can sort something out for it.
