Taigen Multi-Direction Elevation Upgrade

[Son of a gun-ner]

I may be talking nonsense? but if we reverse the two motor wires? would change anything?

You are talking nonsense. Reversing the two motor wires would do nothing. It is the OLD cycling elevation method, like Heng Long RX13

[TouchConnors]

Hello, what kind of electronics do you have in your Tiger I ?

It's the V3 board.

[TouchConnors]

From memory There was a time, a cannon recoil by servo, installed on the side of the Tir Bille, but was not great (personal opinion)
I did not understand, exactly, what our friend wanted ?

That's fair:)

I just want to be able to control the gun elevation by pushing the stick up or down as opposed to pushing it up which then starts it cycling by first going up, hitting its max elevation and then starring back down. Then hitting the bottom of its elevation and automatically starting back up.

Lather.Rinse.Repeat

[TouchConnors]

Taigen is somewhat outdated in that regard (newer Heng Longs have this solved with separate buttor for firing a gun). One of the solutions is third party main baord (Beier, Elmod, Clark, IBU etc)

Did Taigen make provision for the use of one or two servo's on their latest boards?

[Jofaur86]

Well then, as follows not to a stupidity ready ..... a few years ago, this system at RC Tank.de, which allowed to use a servo on a Type RX 18 card, I have already explained on the forum, how did it work? but can i start over? if interested? Even been used by a friend, to have the canon recoil, on a Sherman Tam. works very well

1AE3E763-426A-4133-A820-25140931FDDA.jpeg (740.66 KiB) Viewed 1067 times

could be a solution, to use with your turntable? and some mechanical work ? i said could