Good evening, a question about elmod, please, how to add 2 Esc on an Elmod card? is the board that manages the Esc or do you need two additional channels? thank you in advance, and Merry Christmas to all
this in the case of the use of more powerful motors?
Esc sur Elmod
Re: Esc sur Elmod
It is the board that manages the esc, I recommend a double esc type " sabertooth" that is suitable for tanks
Re: Esc sur Elmod
Hi,
the old Elmod Fusion ECO/PRO had dedicated connections for external ESC.
This is no longer the case with the Fusion X.
Here you need v-cables or two additional Channels.
the old Elmod Fusion ECO/PRO had dedicated connections for external ESC.
This is no longer the case with the Fusion X.
Here you need v-cables or two additional Channels.
-
- Warrant Officer 1st Class
- Posts: 1665
- Joined: Tue Dec 25, 2018 11:28 pm
- Location: Centre France
Re: Esc sur Elmod
Bonjour,et merci à vous pour la réponse,ma carte ėtant ancienne ,Tintank Pro II avec Blaster IV, je vais voir si possible
Bonne semaine à vous
Bonne semaine à vous
Re: Esc sur Elmod
It was the "pro flex" versions that managed external esc. If this is not the case with your board, you will have to do a bypass from the receiver