- F4BA9D60-A09B-4BF5-BD7E-8438F707BDF4.jpeg (68.33 KiB) Viewed 1231 times
KV1 Heng Long
Forum rules
This section is for posting a build log of your Heng Long tank.
Questions relating to issues you are having with your tank(s) should be posted in the General Questions forum here: viewforum.php?f=14
This section is for posting a build log of your Heng Long tank.
Questions relating to issues you are having with your tank(s) should be posted in the General Questions forum here: viewforum.php?f=14
-
- Warrant Officer 1st Class
- Posts: 1665
- Joined: Tue Dec 25, 2018 11:28 pm
- Location: Centre France
Re: KV1 Heng Long
if I understand correctly, this is where the short circuit is? Unless I am mistaken? is this the location of the button for "Binder" the plate? not reverse the power supply which is the red plug!! only my personal opinion. But before replacing with new equipment? check the existing wiring, otherwise you will have the same results
- billy.fisher
- Recruit
- Posts: 28
- Joined: Sat Jun 04, 2022 2:59 pm
- Location: North East UK
Re: KV1 Heng Long
Yes it was next to there
Looks like the live feed for the turret that blew it
Looks like the live feed for the turret that blew it
- billy.fisher
- Recruit
- Posts: 28
- Joined: Sat Jun 04, 2022 2:59 pm
- Location: North East UK
Re: KV1 Heng Long
Pin1. positive. elevation
-
- Warrant Officer 1st Class
- Posts: 1665
- Joined: Tue Dec 25, 2018 11:28 pm
- Location: Centre France
Re: KV1 Heng Long
this socket is not the elevation positive .... everything concerning the turret is on the 8-pin plug, connected by a cord to the 8-pin socket on the upper chassis. See actual connection, and compliant, in the attached photo
[attachment=0]9C2F6EFE-0684-4E08-9F9D-9F4211F4824C.jpeg[/attachment
this is the correct connection to CN 9[attachment=0]9C2F6EFE-0684-4E08-9F9D-9F4211F4824C.jpeg[/attachment
- Attachments
-
- 9C2F6EFE-0684-4E08-9F9D-9F4211F4824C.jpeg (66.57 KiB) Viewed 1221 times
- billy.fisher
- Recruit
- Posts: 28
- Joined: Sat Jun 04, 2022 2:59 pm
- Location: North East UK
Re: KV1 Heng Long
Yes that's the one
Pin 1 on that plug
Pin 1 on that plug
- billy.fisher
- Recruit
- Posts: 28
- Joined: Sat Jun 04, 2022 2:59 pm
- Location: North East UK
Re: KV1 Heng Long
I did mean to write turret rotation
Anyway I am changing to v6 reciver now so I will probably have to rewire the connections
Anyway I am changing to v6 reciver now so I will probably have to rewire the connections
-
- Warrant Officer 1st Class
- Posts: 1665
- Joined: Tue Dec 25, 2018 11:28 pm
- Location: Centre France
Re: KV1 Heng Long
As you can see on the color photo of the 8-pin plug, everything concerning the turret is on this plug now and the wire colors (in principle, except for exceptions) correspond. Good after as I explained in a previous message, check your wiring? otherwise it will still smoke, good luck for the rest.billy.fisher wrote:I did mean to write turret rotation
Anyway I am changing to v6 reciver now so I will probably have to rewire the connections
-
- Warrant Officer 1st Class
- Posts: 1665
- Joined: Tue Dec 25, 2018 11:28 pm
- Location: Centre France
Re: KV1 Heng Long
one last info, attached is an old Heng Long wiring diagram, but still valid. After that, it's up to you!!!
- billy.fisher
- Recruit
- Posts: 28
- Joined: Sat Jun 04, 2022 2:59 pm
- Location: North East UK
Re: KV1 Heng Long
thankyou for that Jofaur
i can only give it a go
i can only give it a go
Re: KV1 Heng Long
If your going to install the V6 receiver the whole tank will need rewiring but its not difficult.
Everything on the V6 has its own circuit and connection to the board which makes things a lot simpler.
Everything on the V6 has its own circuit and connection to the board which makes things a lot simpler.