KV1 Heng Long
Forum rules
This section is for posting a build log of your Heng Long tank.
Questions relating to issues you are having with your tank(s) should be posted in the General Questions forum here: viewforum.php?f=14
This section is for posting a build log of your Heng Long tank.
Questions relating to issues you are having with your tank(s) should be posted in the General Questions forum here: viewforum.php?f=14
- HERMAN BIX
- Brigadier
- Posts: 10354
- Joined: Sun Jan 12, 2014 12:15 am
- Location: Gold Coast,Australia
Re: KV1 Heng Long
Im picking it will be a V5.4 as its a 2.4G with an 8 cable supply to a sub-board.
if the controller has 4 buttons on the lower right , its probably a late, if not, still a 2.4g but an early one .............
Got all that ??!!
Its a 2,4G board, and thats good enough for now. All that having a late V5.3 might give you is a 2-option sound set.
Tiger 1
Leo 2
The next versions(V6.0 onwards) allow 4 sound options and various light and servo controls.
The V7 versions only have 2 sound sets, but different pairs (tiger 1 & Leo2/T90 & abrams) that I know of.
As advised by Mr Jofaur, there are lots of guiding posts in the H/L electronics section that should enable clarity on just what you may or may not have.
Im off for a lie down & an asprin
if the controller has 4 buttons on the lower right , its probably a late, if not, still a 2.4g but an early one .............
Got all that ??!!
Its a 2,4G board, and thats good enough for now. All that having a late V5.3 might give you is a 2-option sound set.
Tiger 1
Leo 2
The next versions(V6.0 onwards) allow 4 sound options and various light and servo controls.
The V7 versions only have 2 sound sets, but different pairs (tiger 1 & Leo2/T90 & abrams) that I know of.
As advised by Mr Jofaur, there are lots of guiding posts in the H/L electronics section that should enable clarity on just what you may or may not have.
Im off for a lie down & an asprin
HL JAGDPANTHER,HL TIGER 1,HL PzIII MUNITIONSCHLEPPER, HL KT OCTOPUS,HL PANTHER ZU-FUSS,HL STuG III,HL T34/85 BEDSPRING,
HL PZIV MALTA,MATORRO JAGDTIGER,HL F05 TIGER,TAMIYA KT,HL PANTHERDOZER,HL EARLY PANTHER G,TAIGEN/RAMINATOR T34/76,
HL AN-BRI-RAM SU-85
HL PZIV MALTA,MATORRO JAGDTIGER,HL F05 TIGER,TAMIYA KT,HL PANTHERDOZER,HL EARLY PANTHER G,TAIGEN/RAMINATOR T34/76,
HL AN-BRI-RAM SU-85
- billy.fisher
- Recruit
- Posts: 28
- Joined: Sat Jun 04, 2022 2:59 pm
- Location: North East UK
Re: KV1 Heng Long
Thank you for the reply and links
Yes the tx has the 4 buttons fight hand side
Got it in bits last night so I can start on adding the bearings and looks like it could do with a bit stiffening up inside the hull
Did the Idle wheels today at work just a drop of locktite on the bearings and fitting bolts has transformed them
Yes the tx has the 4 buttons fight hand side
Got it in bits last night so I can start on adding the bearings and looks like it could do with a bit stiffening up inside the hull
Did the Idle wheels today at work just a drop of locktite on the bearings and fitting bolts has transformed them
-
- Warrant Officer 1st Class
- Posts: 1665
- Joined: Tue Dec 25, 2018 11:28 pm
- Location: Centre France
Re: KV1 Heng Long
to improve a KV, there are some metal parts here. sometimes more practical than modifying existing plastic, moreover he is a member of the forum, and good services and advice
https://www.forgebeartanks.com/store/c14/KV1.html
https://www.forgebeartanks.com/store/c14/KV1.html
- billy.fisher
- Recruit
- Posts: 28
- Joined: Sat Jun 04, 2022 2:59 pm
- Location: North East UK
Re: KV1 Heng Long
this is the tx
sticker inside the hull has a sticker with 2015 on it
sticker inside the hull has a sticker with 2015 on it
- billy.fisher
- Recruit
- Posts: 28
- Joined: Sat Jun 04, 2022 2:59 pm
- Location: North East UK
Re: KV1 Heng Long
all in bits washed with soapy water ready for primer
- billy.fisher
- Recruit
- Posts: 28
- Joined: Sat Jun 04, 2022 2:59 pm
- Location: North East UK
Re: KV1 Heng Long
managed to get the bearing fitted
- billy.fisher
- Recruit
- Posts: 28
- Joined: Sat Jun 04, 2022 2:59 pm
- Location: North East UK
Re: KV1 Heng Long
got it finished apart from some black for barrel and exhausts
but the damm thing blew the rx up
i think it goes in the blue bin
anyone have one of these thanks
but the damm thing blew the rx up
i think it goes in the blue bin
anyone have one of these thanks
-
- Private
- Posts: 54
- Joined: Wed May 04, 2022 10:29 am
Re: KV1 Heng Long
What about asking the seller, worst is no answer, best case is new RX?
-
- Warrant Officer 1st Class
- Posts: 1665
- Joined: Tue Dec 25, 2018 11:28 pm
- Location: Centre France
Re: KV1 Heng Long
Hello, what happened? to toast the platinum? Connection error, or others? Look in the sales section, maybe someone will have a chance, or replace everything, see the site of a member of the forum, who will provide you with very good advice , https://www.forgebeartanks.com/store/c1 ... ducts.html
- billy.fisher
- Recruit
- Posts: 28
- Joined: Sat Jun 04, 2022 2:59 pm
- Location: North East UK
Re: KV1 Heng Long
Cheers for the link
Had a look on interweb transmitter and reciver V6 is only £50
Probably better gat a spare rx as I only plugged the last one in and it frazzled
Had a look on interweb transmitter and reciver V6 is only £50
Probably better gat a spare rx as I only plugged the last one in and it frazzled