sWS "schwerer Wehrmachtsschlepper" 1/16
Re: sWS "schwerer Wehrmachtsschlepper" 1/16
Hello,
yesterday and today some brass formed, machined and soldered... plus 3D-printed etc.
There are already some controls for the driver:
The exhaust silencer attached:
Fuel filter pressure control unit and main cock made:
Steering wheel with holder, indicator switch console and adjusting lever unit printed and attached:
That was a little progress report.
See you soon...and thanks for looking.
yesterday and today some brass formed, machined and soldered... plus 3D-printed etc.
There are already some controls for the driver:
The exhaust silencer attached:
Fuel filter pressure control unit and main cock made:
Steering wheel with holder, indicator switch console and adjusting lever unit printed and attached:
That was a little progress report.
See you soon...and thanks for looking.
-
- Lance Corporal
- Posts: 169
- Joined: Wed Sep 08, 2021 2:28 pm
- Location: Peterborough, England
Re: sWS "schwerer Wehrmachtsschlepper" 1/16
Fantastisch.
Re: sWS "schwerer Wehrmachtsschlepper" 1/16
Hello,
next small update...
Yesterday afternoon I made the gearstick lever and the handbrake lever:
That's it again.
See you soon...and thanks for looking.
next small update...
Yesterday afternoon I made the gearstick lever and the handbrake lever:
That's it again.
See you soon...and thanks for looking.
Re: sWS "schwerer Wehrmachtsschlepper" 1/16
Today I have done a bit more.
I attached the eyelets for the cab tarpaulin and the front wall of the loading area.
Then I played around a bit with the 3.7 flak and added accessories to see where what fits best...
See you...and thanks for looking.
I attached the eyelets for the cab tarpaulin and the front wall of the loading area.
Then I played around a bit with the 3.7 flak and added accessories to see where what fits best...
See you...and thanks for looking.
Re: sWS "schwerer Wehrmachtsschlepper" 1/16
Hi Mr Jhamm,
Nice to see another halftrack build, itching to try mine out now after seeing yours run, i take it its a diy control board ?
Arduino based maybe ?.
Most excellent.
Kind regards Sub.
Nice to see another halftrack build, itching to try mine out now after seeing yours run, i take it its a diy control board ?
Arduino based maybe ?.
Most excellent.
Kind regards Sub.
Re: sWS "schwerer Wehrmachtsschlepper" 1/16
Hey Sub,Sub wrote:Hi Mr Jhamm,
Nice to see another halftrack build, itching to try mine out now after seeing yours run, i take it its a diy control board ?
Arduino based maybe ?.
Most excellent.
Kind regards Sub.
it is a SGS Halftruck Controlboard:
https://www.sgs-electronic.de/webshop/p ... -s-32ls-ht
Regards
Jürgen
-
- Corporal
- Posts: 336
- Joined: Thu Nov 04, 2021 4:30 pm
- Location: Paris
Re: sWS "schwerer Wehrmachtsschlepper" 1/16
Great subject and excellent build !
Re: sWS "schwerer Wehrmachtsschlepper" 1/16
Superbly done, refined and unique. You are doing an inspiring model.
I assume it is the Vandra Flak 43.
I assume it is the Vandra Flak 43.
Re: sWS "schwerer Wehrmachtsschlepper" 1/16
Hello,
step by step...
Base colour Dunkelgelb is applied:
The frames for the side flaps of the loading area are made with a soldering iron and brass profile:
The flak in transport position:
thanks for looking
step by step...
Base colour Dunkelgelb is applied:
The frames for the side flaps of the loading area are made with a soldering iron and brass profile:
The flak in transport position:
thanks for looking