NOOB - Whats Next

Discuss your radio gear here!
cheeseontoast
Recruit
Posts: 9
Joined: Tue Oct 26, 2021 6:22 am

NOOB - Whats Next

Post by cheeseontoast »

Hi guys
I'm a total 100% RC Tank beginner.
I've been building a 10th scale panzer and now at the point where I need to add radio gear, motors etc etc.
I bought a Henglong panzer with the idea to use it as a doner vehicle. Unfortunately I've since discovered this wasn't a good idea.

I already have a pair of 540 motors which came with EDC

So with all that in mind

1 - What do I need. Literally everything that goes inside the tank ??? and how does it all go together

2 - Do you have any preferences of makes etc

3 - Budget, around £400 to £500. But its not set in stone for the right equipment.
User avatar
stu_the_flat
Lance Corporal
Posts: 183
Joined: Sun Oct 17, 2021 8:19 am
Location: Glasgow

Re: NOOB - Whats Next

Post by stu_the_flat »

I'm not 100% sure I can offer the correct advice as I am not familiar with your 1/10th scale, in a way your build is quite advanced, adding photos in here is a bit clunky but might help people get an idea, the gear box will be the bit that will be the most tricky.

I recently parted out an old 27mHz radio tank, I've got the control unit, speaker, motor for turning the turret and gun rising and lowering motor all 1/16th and a wee smoke unit sitting here. you could use that as a starting point. otherwise have a look at Forgebear, they are really good.
cheeseontoast
Recruit
Posts: 9
Joined: Tue Oct 26, 2021 6:22 am

Re: NOOB - Whats Next

Post by cheeseontoast »

Sorry trying to get the image thing to work

http://bigkidcreations.co.uk/tanks/panzer_01.jpg

http://bigkidcreations.co.uk/tanks/panzer_02.jpg

Can you recommend a radio set. i've been looking at the spektrum dx8. Would it work for tanks ?

Do I need a receiver as well as the transmiter ? or does radio connect directly to tank controller

Can you recommend a controller !
User avatar
stu_the_flat
Lance Corporal
Posts: 183
Joined: Sun Oct 17, 2021 8:19 am
Location: Glasgow

Re: NOOB - Whats Next

Post by stu_the_flat »

I am afraid I don't know about the spektrum dx8 but I'm sure others might

I've got a heng long RX18 control system, I've just checked and I can get the motors to work but the speaker was not making any sound I am not sure why it did when I deconstructed it. Its yours if you want it. this is not my video but it is the same system.

https://www.youtube.com/watch?v=WpQUyFk ... ucks24%2F7
Jofaur86
Warrant Officer 1st Class
Posts: 1663
Joined: Tue Dec 25, 2018 11:28 pm
Location: Centre France

Re: NOOB - Whats Next

Post by Jofaur86 »

:) Good evening,
I may not have understood everything? but as for the DX8 radio, will not work with an original turntable, HengbLong or Taigen, as in the video. For this you need an electronics that works with a current standard receiver, for sound advice on the radio ? I advise you to read the excellent blig of the friend "Rad" member of this forum
https://radindustries.wordpress.com/2020/06/25/radios/
https://radindustries.wordpress.com/
User avatar
Kaczor
Warrant Officer 1st Class
Posts: 1756
Joined: Fri May 18, 2018 9:58 am
Location: Ciechanow, Poland
Contact:

Re: NOOB - Whats Next

Post by Kaczor »

Those are brushless motors so toy-grade Heng Long or Taigen wouldn't work. Best option would be Elmod Fusion Pro Rev. F. but unfortuantely it seems all stock is sold out after the successor was announced.
https://radindustries.wordpress.com/202 ... pro-rev-f/
Jofaur86
Warrant Officer 1st Class
Posts: 1663
Joined: Tue Dec 25, 2018 11:28 pm
Location: Centre France

Re: NOOB - Whats Next

Post by Jofaur86 »

:D Good evening Kaczor, enlarging the photo, I am not convinced that these motors are brushless? 8O But I could be wrong
User avatar
Kaczor
Warrant Officer 1st Class
Posts: 1756
Joined: Fri May 18, 2018 9:58 am
Location: Ciechanow, Poland
Contact:

Re: NOOB - Whats Next

Post by Kaczor »

You are right. It should be be frased "IF those are brushless" ;)
Jofaur86
Warrant Officer 1st Class
Posts: 1663
Joined: Tue Dec 25, 2018 11:28 pm
Location: Centre France

Re: NOOB - Whats Next

Post by Jofaur86 »

:O On the other hand, follows not convinced, that the plastic gears last a long time in operation ???
cheeseontoast
Recruit
Posts: 9
Joined: Tue Oct 26, 2021 6:22 am

Re: NOOB - Whats Next

Post by cheeseontoast »

http://www.bigkidcreations.co.uk/tanks/panzer_01.jpg

Motors are brushed and come with there own ecu (right name?)

I feel I must make clear,
I have no interest in 1/16th scale (to small)
I have no interest in Henglong, Tamaya or any other kits etc.
Last edited by cheeseontoast on Sat Nov 27, 2021 2:36 am, edited 6 times in total.
Post Reply

Return to “Radio Gear”