Will,
That is one heck of a nice find! Don't know what you traded, but I'd say you came out on top even with the road trip!
Cheers,
Eric.
Torro 1/16 LCM3 new toy
- EAO
- Warrant Officer 2nd Class
- Posts: 1162
- Joined: Sun May 10, 2020 5:29 pm
- Location: Central Missouri, U.S. of A.
Re: Torro 1/16 LCM3 new toy
"You can always tell a German, you just can't tell him much." Anonymous.
German cars, German girls, German beer, German firearms, German Shepherds, German motorcycles... Not necessarily in that order though!
UP THE IRONS!
German cars, German girls, German beer, German firearms, German Shepherds, German motorcycles... Not necessarily in that order though!
UP THE IRONS!
- Herr Dr. Professor
- Lieutenant
- Posts: 3713
- Joined: Mon Apr 22, 2019 10:48 pm
- Location: Southern Wisconsin USA
Re: Torro 1/16 LCM3 new toy
What's this LCVP Tell me more, please. Are there more photos, Lee?
Do you remember the old UDT214 model kit of the 'sixties ('fifties?) ? I love that kit, and it is still being produced now and then. I built one a few years ago. Another of the Tuesday modelers here has three built and two more waiting. In the early 'sixties, we discovered that the LCVP, sans propellers, given a slight push, would zoom across winter snow in the front yard. In summer it would float in the ditch superbly. Those were the days of KC*---before RC.
* Kid Control
Do you remember the old UDT214 model kit of the 'sixties ('fifties?) ? I love that kit, and it is still being produced now and then. I built one a few years ago. Another of the Tuesday modelers here has three built and two more waiting. In the early 'sixties, we discovered that the LCVP, sans propellers, given a slight push, would zoom across winter snow in the front yard. In summer it would float in the ditch superbly. Those were the days of KC*---before RC.
* Kid Control
- Model Builder 4
- 2nd Lieutenant
- Posts: 2329
- Joined: Sun Jul 26, 2015 3:46 pm
- Location: South Wales valleys
- Contact:
Re: Torro 1/16 LCM3 new toy
Hello Professor,Herr Dr. Professor » Fri Nov 19, 2021 7:49 pm
What's this LCVP Tell me more, please. Are there more photos, Lee?
Not wanting to hijack Will's thread I'll just give a quick summary, I bought it about 3 year's ago, already built but as an unfinished model, not sure if it was from a kit or scratch built. It's RC and has a manual wind rear ramp, I've been detailing it on and off for the last couple of years so when I get a little further with it I'll start it's own thread and put some pictures up
Cheers,Lee.
Me ? Addicted ? Never !!
Re: Torro 1/16 LCM3 new toy
Will,
Absolutely a very cool boat
I was just thinking, your kids must be very happy to have parents like you and your wife who have the most cool toys around the house
Absolutely a very cool boat
I was just thinking, your kids must be very happy to have parents like you and your wife who have the most cool toys around the house
Regards,
Jaap
Jaap
- WCP RC MODELS
- Corporal
- Posts: 287
- Joined: Wed Jun 10, 2020 7:43 pm
- Location: Dumfries & Galloway
- Contact:
Re: Torro 1/16 LCM3 new toy
Video to come soon, maybe tomorrow when im having a day of fun things.Jimster wrote:That is so cool! You have a most amazing, diverse collection. I can’t wait to see it operating in the water. How about some pics of the transmitter and electronics when you get a chance.
I am really pleassed with it, but we can do more
I just love building and having interesting models. This really was a chance swap as i knew i wanted one when i saw one, but the price is high and im pretty poor most of the time when building soo many models as have to keep a good stock level of bits and pieces lol
But in the end i did a deal with my friend on this one with one of my Flak 36 88mm, i actually swapped my very first prototype model(which i never do, well now i have i suppose haha) and got this beautyEAO wrote:Will,
That is one heck of a nice find! Don't know what you traded, but I'd say you came out on top even with the road trip!
Cheers,
Eric.
I like to think both parties got a good deal.
It is a little big though, so i will be making a nice shelf in garage for it when i get a chance lol
would be nice to do a lcm vs lcvp for sure
I never knew you had one of those Lee, damn cool, love the cargo aswellModel Builder 4 wrote:Thought I'd put a pic up of my LCVP to show the difference in the models, it's still in it's un-painted state as of yet though
Cheers,Lee.
Sent from my SM-G950F using Tapatalk
Yes i think you are right about trailer, i would never have believed it until i saw a picture of an lcm on the back of a M26 Wagon/trailer and was like, oh no, thats given me an idea hahahahahaha
971wright wrote:Need to weather it lots of rust.Then you need a way of moving it, need a Dragon Wagon ,then you need something to go in it DD sherman.
regards pete
I am goign to print some new crew for ours as the original crew with the model are ok, but i want something better, so lets see what we can do. The MG are going to be fun and fiddly, but yeah i am thinking they have to move with flexible arms of the gunners
Herr Dr. Professor wrote:Will, I am just now finishing three sailors for my LCM: a Coxswain and two gunners. (Correct me if I have the rank incorrect for the officer in charge of an LCM.) I enlisted them through Shapeways. They are printed with some fine and some broad-stroke detail and rather, ah, "bold" facial expressions. They are not easy to prepare and paint, as two had 155mm holes in their backs from the printing process, and the third was in upper and lower halves and separate arms that required a lot of fiddling to fit. I will post pictures when I am done.
Your LCM has the tire dock bumpers replaced with another kind of dock bumper. (You can see the tire-type bumpers on Pete's LCM.) Yours also has some added life-preservers. I don't know how much these LCMs rusted. I would guess that they were short-lived and probably sank or were scuttled before they had time to rust.
I, too, would like to either replace or rework the .50 cals. because the ones provided will rotate but not elevate. I want to be able to align them with the gunners' hands.
Cheers hahaHERMAN BIX wrote:Thats a hell of a new toy indeed Mr Capri !!
Whatever will you jump into next ??
As Im trapped home with this stupid bung ankle, Im looking to do a bit of housekeeping in here.
I reckon this will soon go into the boats section !................well, its a boat, and its RC so its an RC Boat
Well this was one for me i say shamelessly, i haven't actually had a chance to enjoy any models recently of my own, so was a treat. The drive was worth it for sure
Yeah it is an odd move, however Catherine & I agreed we need to try and balance the Axis stuff and get some more allied vehicles in, so this is us trying to be more balanced lol
Next we have some rather interesting things.................... V2 & Meiller Wagen with SS100 to follow in future, Flak 40 on quad axles so i have something to tow behind the Famo 18ton halftrack. A SIG33 is moving along slowly as are some trucks.
But really the thing absorbing the time is the build of 5x 251 chassis which are all printing away currently
Sorry Catherine i hijacked your login as my computer is off and i couldn't be bothered to log it in hahahahaha
Yeah i reckon my kids have the coolest parents eveeeeeer hahahahajee wrote:Will,
Absolutely a very cool boat
I was just thinking, your kids must be very happy to have parents like you and your wife who have the most cool toys around the house
- Will01Capri
- 2nd Lieutenant
- Posts: 2704
- Joined: Tue Jul 18, 2017 5:34 pm
- Location: South Scotland
Re: Torro 1/16 LCM3 new toy
Video of a look around with radio gear. I like these flysky transmitters
HL camo E' Tiger
HL L' Tiger
M26 Pershing WW2 project
Tam K'Tiger project
HL Walker Bulldog project?
HL Panzer IV Munitionsschlepper für Karl-Gerät
HL Sherman project?
1/24 Leopard 2 Custom mod
2 many trucks to list!
HL L' Tiger
M26 Pershing WW2 project
Tam K'Tiger project
HL Walker Bulldog project?
HL Panzer IV Munitionsschlepper für Karl-Gerät
HL Sherman project?
1/24 Leopard 2 Custom mod
2 many trucks to list!
- Herr Dr. Professor
- Lieutenant
- Posts: 3713
- Joined: Mon Apr 22, 2019 10:48 pm
- Location: Southern Wisconsin USA
Re: Torro 1/16 LCM3 new toy
Alas, as you know, the ones from Torro do not come with sound. The props, rudders, and ramp all work smoothly, but no sound. So you have yourself an extra nice feature, but I am not jealous, not one little bit. Please do keep us informed about how your sailors are progressing while they are enlisted and trained.