Smear free Windscreens.

This section contains tips and tricks on building and running model vehicles. If you know any then post them here and if you need to find any, try your first search here.

Postby jarndice » Sat Feb 20, 2021 11:10 am

I have been using "Deluxe R/C Modellers Canopy Glue" for some years to secure windscreens and Aircraft Canopy's,
The advertising states it to be Smear free,
if only :lolno:
The answer to a smear free Windshield is a length of Low Tack Tape cut to size leaving just the edge/s that takes the glue tape free,
Stick it to both sides when access to both sides is available after application and fitting of the glazing is finished, obviously when you can only get to one side then more care is needed but the end result is worth the extra effort :thumbup:
Carefully remove the tape once the glue has dried.
User avatar
Posts: 6655
Joined: Mon Sep 03, 2012 11:27 am
Location: the mountains of hertfordshire

Postby Herr Dr. Professor » Sat Feb 20, 2021 7:44 pm

:think:I have never tried the tape. When Covid subsides enough for me to return to a not-so-local hobby store (nothing is local around here), I will check it out. I use a PSA (pressure-sensitive adhesive) glue in modeling 1/48, 1/35, and 1/32. In 1/16 I have even used it to attach small parts such as tools. The PSA can wash off with water before it sets up, and I find that I can usually, with care, peel it off if need be, after it has set. In fact, because I have a bad habit of priming and doing a first coat of finish color on model parts while they are on the tree, I have in some cases used PSA on smaller parts to avoid boogering-up paint, and I usually get lucky.
User avatar
Herr Dr. Professor
Posts: 381
Joined: Mon Apr 22, 2019 10:48 pm
Location: Southern Wisconsin USA

Return to Tips and Tricks

Who is online

Users browsing this forum: No registered users and 4 guests