Help with Tami 1:16 Pershing
Forum rules
If your question is electronics related please post it in one of the relevant boards here: viewforum.php?f=31
If your question is electronics related please post it in one of the relevant boards here: viewforum.php?f=31
Help with Tami 1:16 Pershing
Sorry if I’m being a pain, but this is the first Tami RC Tank I have built. I have got to the point of fitting the turret, apart from the fact that there are more wires than in the telephone exchange, I can’t seem to fit the turret.
They tell you to slot the turret with the 2 lugs into the Tank Body, and then the gear ring, I assume slots into its place ready to drive it, but then you are told to twist the turret clockwise to lock it! It made a graunching Sound as if the gear worm had slipped, but it doesn’t turn? Makes a bit of a noise and tries to turn.
Hope I’ve been explicit enough.
Any ideas
They tell you to slot the turret with the 2 lugs into the Tank Body, and then the gear ring, I assume slots into its place ready to drive it, but then you are told to twist the turret clockwise to lock it! It made a graunching Sound as if the gear worm had slipped, but it doesn’t turn? Makes a bit of a noise and tries to turn.
Hope I’ve been explicit enough.
Any ideas
Last edited by Winalot on Wed Oct 14, 2020 8:20 pm, edited 1 time in total.
"It’s not despair that kills you, but hope" John Cleese
- Model Builder 4
- 2nd Lieutenant
- Posts: 2329
- Joined: Sun Jul 26, 2015 3:46 pm
- Location: South Wales valleys
- Contact:
Re: Help withbTamiya 1:16 Petshing
This is a gripe I have with the tamiya traverse units, they are very weak, the sound you are most probably hearing is the slipper gear which is fitted to the unit which acts as a measure to prevent doing any damage if the turret gets jammed and can't move. I have had exactly the same problem with my own, you have to try and make the wiring as neat as you possibly can and try to stop it interfering and fouling the movement of the turret ring
Cheers, Lee.
Cheers, Lee.
Me ? Addicted ? Never !!
Re: Help withbTamiya 1:16 Petshing
They do make an awful noise when you click it straight.
Works fine if greased a little.
Persevere and sort the wiring as best you can! The Tiger I is capacious in comparison!
Works fine if greased a little.
Persevere and sort the wiring as best you can! The Tiger I is capacious in comparison!
Re: Help withbTamiya 1:16 Petshing
Ok thanks for quick replies. Yes im sure it’s the wires getting in the way, I think the bracket holding the motor could become bent easily, got a lot of potential bend in it.
I’ll persevere, this forum so helpful
W
I’ll persevere, this forum so helpful
W
"It’s not despair that kills you, but hope" John Cleese
Re: Help with Tami 1:16 Pershing
Hi
Im still having trouble with turret rotation. I ve tidied up all the wires, and I don’t think there binding.
It tries to rotate but then stops and clicks. I can’t see much wrong inside! The roller wheels x3 round the turret hole may be a little stiff, could that be it?
W
Im still having trouble with turret rotation. I ve tidied up all the wires, and I don’t think there binding.
It tries to rotate but then stops and clicks. I can’t see much wrong inside! The roller wheels x3 round the turret hole may be a little stiff, could that be it?
W
"It’s not despair that kills you, but hope" John Cleese
Re: Help with Tami 1:16 Pershing
Glue the slipper clutch. I had to do mine. Runs perfectly now.
- Son of a gun-ner
- Lieutenant-Colonel
- Posts: 6865
- Joined: Sun May 07, 2017 8:49 pm
- Location: Surrey UK
Re: Help with Tami 1:16 Pershing
I'm sure Wayne made a 3D printed cover for that unit
Mick - The grit in the underpants of life!
And always happy to spare the bytes
TOTM needs YOU support YOUR TOTM competition, I'm doing my part, are YOU?
And always happy to spare the bytes
TOTM needs YOU support YOUR TOTM competition, I'm doing my part, are YOU?
Re: Help with Tami 1:16 Pershing
Thanks, but am I being thick, where is the slipper clutch?
"It’s not despair that kills you, but hope" John Cleese
Re: Help with Tami 1:16 Pershing
Its built intro the last gear on the unit (the one that engages the turret ring gear). A simple fix I use is to disassemble the unit and switch the gear with the slipper onto the middle shaft, rather than gum it up with epoxy. This greatly increases the amount of force required for the slipper to operate, but doesn't completely remove the function.
Re: Help with Tami 1:16 Pershing
Thank you, I will try that tomorow.
W
W
"It’s not despair that kills you, but hope" John Cleese