howdy. been a while heres a VK 16.02 Leopard with a 3d printed top and a chopped down HL Jpanther lower hull.
VK 16.02 Leopard
VK 16.02 Leopard
Heng Long tanks:
KV-1E
KV-2 MT-1&2
M41
King tiger
Jagdpanther
IJA Type 5 heavy 160ton (to be 3d printed)
FCM F1 (awaiting electronics)
Jagdpanzer E-100 (3D printing in progress)
KV-1E
KV-2 MT-1&2
M41
King tiger
Jagdpanther
IJA Type 5 heavy 160ton (to be 3d printed)
FCM F1 (awaiting electronics)
Jagdpanzer E-100 (3D printing in progress)
- c.rainford73
- Major
- Posts: 6104
- Joined: Thu Aug 25, 2016 7:34 pm
- Location: Connecticut USA
Re: VK 16.02 Leopard
This is very nice. Great build
Sent from my SM-N975U using Tapatalk
Sent from my SM-N975U using Tapatalk
Tanks alot....
- 43rdRecceReg
- Major
- Posts: 6294
- Joined: Fri Jul 31, 2015 11:38 am
- Location: North West Highlands, Scotland
Re: VK 16.02 Leopard
An engaging sawn-off Panther. It's always inspiring to see unconventional projects (especially WW2 prototypes) being put together well. The arrangement of the internal electronic components is looking very promising.
"Get your facts first, and then you can distort them as much as you please"- Mark Twain.
Re: VK 16.02 Leopard
Heres part of the turret
Heng Long tanks:
KV-1E
KV-2 MT-1&2
M41
King tiger
Jagdpanther
IJA Type 5 heavy 160ton (to be 3d printed)
FCM F1 (awaiting electronics)
Jagdpanzer E-100 (3D printing in progress)
KV-1E
KV-2 MT-1&2
M41
King tiger
Jagdpanther
IJA Type 5 heavy 160ton (to be 3d printed)
FCM F1 (awaiting electronics)
Jagdpanzer E-100 (3D printing in progress)
Re: VK 16.02 Leopard
Very roughly positioned and will need more trimming down of excess plastic to make it flush too. Quite satisfied the speaker is at the engine43rdRecceReg wrote: An engaging sawn-off Panther. It's always inspiring to see unconventional projects (especially WW2 prototypes) being put together well. The arrangement of the internal electronic components is looking very promising.
Heng Long tanks:
KV-1E
KV-2 MT-1&2
M41
King tiger
Jagdpanther
IJA Type 5 heavy 160ton (to be 3d printed)
FCM F1 (awaiting electronics)
Jagdpanzer E-100 (3D printing in progress)
KV-1E
KV-2 MT-1&2
M41
King tiger
Jagdpanther
IJA Type 5 heavy 160ton (to be 3d printed)
FCM F1 (awaiting electronics)
Jagdpanzer E-100 (3D printing in progress)