In a fit of madness... KV2

This section is to 'show and tell' about any customizing or re-modeling you have done (or are doing) to a Heng Long tank.
Forum rules
This section is for posting a build log of your Heng Long tank.
Questions relating to issues you are having with your tank(s) should be posted in the General Questions forum here: viewforum.php?f=14
User avatar
jonh
Private
Posts: 63
Joined: Sun May 24, 2020 4:12 pm
Location: South Wales UK

In a fit of madness... KV2

Post by jonh »

I decided to try a bit of modeling proper and decided to convert a KV2 captured turret to a Russian turret. Been done many times I know but I wanted a relatively easy project to start with. I filled in the German cupola hole with 1.5mm plasticard, did a bit of filling and sanding and this is the result. Primer arrived this morning so I got it primed. Not perfect by a long way but I hope it looks ok(ish)......
IMG_0099.JPG
IMG_0099.JPG (46.45 KiB) Viewed 3186 times
Last edited by jonh on Sat Jun 27, 2020 2:56 pm, edited 1 time in total.
User avatar
Jimster
Lieutenant
Posts: 3057
Joined: Mon Dec 10, 2018 1:51 am
Location: Illinois

Re: In a fit of madness... KV2

Post by Jimster »

Looks as if you did an excellent job. I can’t see any signs of your modification at all! That’s a skill I need to work on.
Exhibitedbrute
Warrant Officer 2nd Class
Posts: 1311
Joined: Tue Dec 17, 2019 12:27 am

Re: In a fit of madness... KV2

Post by Exhibitedbrute »

Looks like a Russian kv turret to me
It’s your tank it’s what you make it
User avatar
jonh
Private
Posts: 63
Joined: Sun May 24, 2020 4:12 pm
Location: South Wales UK

Re: In a fit of madness... KV2

Post by jonh »

Ah well - first mistake made. I just looked at a drawing of the turret and realized (noticed) that the right hand periscope is not in fact inline with the left hand and should be in a more rearwards position - cut it off and start again time!
KV2 periscopes.jpg
KV2 periscopes.jpg (14.51 KiB) Viewed 3096 times
User avatar
midlife306
Warrant Officer 1st Class
Posts: 2238
Joined: Sun Aug 27, 2017 10:34 am

Re: In a fit of madness... KV2

Post by midlife306 »

Don’t worry, we all have “Doh!” Moments lol


Sent from my iPhone using Tapatalk
User avatar
jonh
Private
Posts: 63
Joined: Sun May 24, 2020 4:12 pm
Location: South Wales UK

Re: In a fit of madness... KV2

Post by jonh »

Don’t worry, we all have “Doh!” Moments lol
I just can't figure out how I missed noticing that (what an xyz??? I am)- ah well. At least it is an easy fix.
User avatar
jonh
Private
Posts: 63
Joined: Sun May 24, 2020 4:12 pm
Location: South Wales UK

Re: In a fit of madness... KV2

Post by jonh »

Ah - that's better (I hope). That will teach me to RTFN in future.....
IMG_0105.JPG
IMG_0105.JPG (34.65 KiB) Viewed 2995 times
User avatar
jonh
Private
Posts: 63
Joined: Sun May 24, 2020 4:12 pm
Location: South Wales UK

Re: In a fit of madness... KV2

Post by jonh »

A bit more progress:
Have installed the electronics in the hull and turret:
KV2 electronics.jpg
KV2 electronics.jpg (84.37 KiB) Viewed 2907 times
I wanted a power switch behind the rear door in the turret but the slip ring wiring was not of a gauge suitable to carry the required current so I installed a relay in the hull in order to greatly reduce the current through the slip ring wires.
Here is a rather boring pic of the inside of the upper deck:
KV2 turret inside.jpg
KV2 turret inside.jpg (57.99 KiB) Viewed 2907 times
Probably even more boring - a pic of the upper deck in primer:
KV2 in primer.jpg
KV2 in primer.jpg (57.85 KiB) Viewed 2907 times
I have also adapted the standard unit recoil to use a servo recoil.
User avatar
PainlessWolf
Lieutenant-Colonel
Posts: 7405
Joined: Sun Feb 26, 2012 9:09 pm
Location: Southern Colorado Rocky Mountains

Re: In a fit of madness... KV2

Post by PainlessWolf »

Good Morning!
Not boring to me. The KV-2 is one of my favorite tanks and you are doing a bang up job with this one. Following along.
regards,
Painless
...Here for the Dawn...
User avatar
jonh
Private
Posts: 63
Joined: Sun May 24, 2020 4:12 pm
Location: South Wales UK

Re: In a fit of madness... KV2

Post by jonh »

Thank you Painless.
Post Reply

Return to “Heng Long Builds”