Dasmikro (TBS Benedini clone)

Talk about all other types of electronics here, such as batteries!
User avatar
Rad_Schuhart
Warrant Officer 1st Class
Posts: 1979
Joined: Tue Jan 19, 2016 9:22 am
Location: Spanish living in Graz, Austria. Heart in UK.
Contact:

Re: Dasmikro (TBS Benedini clone)

Post by Rad_Schuhart »

machine and ModelMaker,

it seems both of you are experimenting the same issue. I had no idea this was happening, so I have to try it myself and see what happens...

If it is as you say, probably Mr Benedini is going to need to update his software...
My RC tanks website, loads of free info for everybody:
https://radindustries.wordpress.com/
User avatar
jhamm
Staff Sergeant
Posts: 950
Joined: Fri May 19, 2017 7:21 am
Location: Germany
Contact:

Re: Dasmikro (TBS Benedini clone)

Post by jhamm »

Hi,
try the drivers from FTDI:
https://www.ftdichip.com/Drivers/VCP.htm
ModelMaker
Recruit
Posts: 13
Joined: Sat Oct 12, 2019 6:47 pm

Re: Dasmikro (TBS Benedini clone)

Post by ModelMaker »

Rad_Schuhart wrote:machine and ModelMaker,

it seems both of you are experimenting the same issue. I had no idea this was happening, so I have to try it myself and see what happens...

If it is as you say, probably Mr Benedini is going to need to update his software...
I am using the files that were linked to Banggood, and not having access to the originals I have no idea if they are legit.
What I’m trying to grasp is if there is a specific driver required to connect with Flash or is this a generic driver that allows your computer to recognize the adapter?
I can use troubleshooting to let the computer find a driver, which it did. Or use the driver provided in the links, both drivers seem to give a perfect working feed back in the Devices menu.
User avatar
Rad_Schuhart
Warrant Officer 1st Class
Posts: 1979
Joined: Tue Jan 19, 2016 9:22 am
Location: Spanish living in Graz, Austria. Heart in UK.
Contact:

Re: Dasmikro (TBS Benedini clone)

Post by Rad_Schuhart »

ModelMaker wrote:
Rad_Schuhart wrote:machine and ModelMaker,

it seems both of you are experimenting the same issue. I had no idea this was happening, so I have to try it myself and see what happens...

If it is as you say, probably Mr Benedini is going to need to update his software...
I am using the files that were linked to Banggood, and not having access to the originals I have no idea if they are legit.
What I’m trying to grasp is if there is a specific driver required to connect with Flash or is this a generic driver that allows your computer to recognize the adapter?
I can use troubleshooting to let the computer find a driver, which it did. Or use the driver provided in the links, both drivers seem to give a perfect working feed back in the Devices menu.
The drivers in bangood were the same uploaded on the benedini site. Of course they are not legit... Anyway I dont think there is a specific driver. Try with the one in the link from Jhamm and tell us if it works.

Also check the connectors are fine and well connected. The pins in the micro are so tiny that they might be damaged.
My RC tanks website, loads of free info for everybody:
https://radindustries.wordpress.com/
ModelMaker
Recruit
Posts: 13
Joined: Sat Oct 12, 2019 6:47 pm

Re: Dasmikro (TBS Benedini clone)

Post by ModelMaker »

Rad_Schuhart wrote:
ModelMaker wrote:
Rad_Schuhart wrote:machine and ModelMaker,

it seems both of you are experimenting the same issue. I had no idea this was happening, so I have to try it myself and see what happens...

If it is as you say, probably Mr Benedini is going to need to update his software...
I am using the files that were linked to Banggood, and not having access to the originals I have no idea if they are legit.
What I’m trying to grasp is if there is a specific driver required to connect with Flash or is this a generic driver that allows your computer to recognize the adapter?
I can use troubleshooting to let the computer find a driver, which it did. Or use the driver provided in the links, both drivers seem to give a perfect working feed back in the Devices menu.
The drivers in bangood were the same uploaded on the benedini site. Of course they are not legit... Anyway I dont think there is a specific driver. Try with the one in the link from Jhamm and tell us if it works.

Also check the connectors are fine and well connected. The pins in the micro are so tiny that they might be damaged.
Yeah, just stumped. Connections have been checked twice.
Attachments
E6506E85-B9C1-4D22-8B37-EFA5B5E86533.jpeg
E6506E85-B9C1-4D22-8B37-EFA5B5E86533.jpeg (50.32 KiB) Viewed 2983 times
ModelMaker
Recruit
Posts: 13
Joined: Sat Oct 12, 2019 6:47 pm

Re: Dasmikro (TBS Benedini clone)

Post by ModelMaker »

Okay, I changed the USB cord and downloaded a different driver. Had to turn of the wifi to get the driver to load manually.
I now have connected and green bar. When I click read Param, should that show me the sound set that is pre-loaded ? It doesn’t seem to populate.
Thanks, MM
https://www.google.ca/amp/s/www.usb-dri ... r.html/amp
User avatar
Rad_Schuhart
Warrant Officer 1st Class
Posts: 1979
Joined: Tue Jan 19, 2016 9:22 am
Location: Spanish living in Graz, Austria. Heart in UK.
Contact:

Re: Dasmikro (TBS Benedini clone)

Post by Rad_Schuhart »

ModelMaker wrote:Okay, I changed the USB cord and downloaded a different driver. Had to turn of the wifi to get the driver to load manually.
I now have connected and green bar. When I click read Param, should that show me the sound set that is pre-loaded ? It doesn’t seem to populate.
Thanks, MM
https://www.google.ca/amp/s/www.usb-dri ... r.html/amp
Nope, even when it is there, it never reads the sound set or individual sounds flashed.
If you want to see it, you need to reflash it.
My RC tanks website, loads of free info for everybody:
https://radindustries.wordpress.com/
ModelMaker
Recruit
Posts: 13
Joined: Sat Oct 12, 2019 6:47 pm

Re: Dasmikro (TBS Benedini clone)

Post by ModelMaker »

machine wrote:
ModelMaker wrote:Okay, I changed the USB cord and downloaded a different driver. Had to turn of the wifi to get the driver to load manually.
I now have connected and green bar. When I click read Param, should that show me the sound set that is pre-loaded ? It doesn’t seem to populate.
Thanks, MM
https://www.google.ca/amp/s/www.usb-dri ... r.html/amp
Which driver's did you use?

Sent from my SM-G965U using Tapatalk
Use the link that I added. I tried a few different ones, this one worked.
https://www.usb-drivers.org/ft232r-usb-uart-driver.html
Last edited by ModelMaker on Tue Nov 12, 2019 4:38 pm, edited 1 time in total.
ModelMaker
Recruit
Posts: 13
Joined: Sat Oct 12, 2019 6:47 pm

Re: Dasmikro (TBS Benedini clone)

Post by ModelMaker »

Rad_Schuhart wrote:
ModelMaker wrote:Okay, I changed the USB cord and downloaded a different driver. Had to turn of the wifi to get the driver to load manually.
I now have connected and green bar. When I click read Param, should that show me the sound set that is pre-loaded ? It doesn’t seem to populate.
Thanks, MM
https://www.google.ca/amp/s/www.usb-dri ... r.html/amp
Nope, even when it is there, it never reads the sound set or individual sounds flashed.
If you want to see it, you need to reflash it.
Thanks, still learning.
User avatar
Rad_Schuhart
Warrant Officer 1st Class
Posts: 1979
Joined: Tue Jan 19, 2016 9:22 am
Location: Spanish living in Graz, Austria. Heart in UK.
Contact:

Re: Dasmikro (TBS Benedini clone)

Post by Rad_Schuhart »

ModelMaker wrote:
Rad_Schuhart wrote:
ModelMaker wrote:Okay, I changed the USB cord and downloaded a different driver. Had to turn of the wifi to get the driver to load manually.
I now have connected and green bar. When I click read Param, should that show me the sound set that is pre-loaded ? It doesn’t seem to populate.
Thanks, MM
https://www.google.ca/amp/s/www.usb-dri ... r.html/amp
Nope, even when it is there, it never reads the sound set or individual sounds flashed.
If you want to see it, you need to reflash it.
Thanks, still learning.
Me too, me too.
My RC tanks website, loads of free info for everybody:
https://radindustries.wordpress.com/
Post Reply

Return to “Other electronics”