Panda Hobby Panzer 38(T)

This section is for builds that are not strictly Tamiya or Heng Long. For instance, replacing the electronics from a WSN or Matorro, or even a scratch-build.
Post Reply
User avatar
silversurfer1947
Lieutenant
Posts: 3338
Joined: Tue Oct 27, 2015 9:54 pm
Location: Bristol, UK

Panda Hobby Panzer 38(T)

Post by silversurfer1947 »

I have had this sitting on a shelf for a number of years now.
IMG_20190908_124248.jpg
During that time I have added the 35rctank.com conversion kit and later the Spade ace metal tracks. In the last few days, I have received a Henntec track tensioner. (Excellent service from Guido).

I have decided it is about time that I actually did something with it. I was and still am most impressed by Carl's award winning work, from which I shall be shamelessly be pirating as much information and tips as possible. (He is aware of my intentions!)

I really did not fancy my chances of drilling all those plastic track links, hence the metal ones. That has not been totally straight forward as there is an inconsistency in the castings, some being very tight fits. I filed them down where possible. They are fairly soft metal so I am hoping that repeated flexing will ease them off a little. I don't think they will stand up to very heavy use, but I am not intending that. I started using by using the wire that was supplied, but changed over to using pins which I cut down after fitting. According to the kit instructions, there are 186 links for the 2 tracks, so I have followed suit. Some very sore and frequently punctured fingers later, the tracks are assembled.
IMG_20190908_124343.jpg
It now remains to colour them up initially with gun blacking. I have had a look through the forum for technique for producing a realistic overall finish/weathering without success. If someone can point me at painting and weathering metal tracks I shall be grateful.
Richard
Tamiya Tiger 1, Taigen FlakPanzer IV,Torro M16 half-track, Tamiya Panther,WSN/Torro T34,Taigen M41 Bulldog,H/l/Taigen Sherman M4A3,H/L T90, Haya M3 Grant, Metal Origins 234/2 Puma, Nashorn by Alwyn. I was only going to have one tank - honest! :D
User avatar
c.rainford73
Major
Posts: 6104
Joined: Thu Aug 25, 2016 7:34 pm
Location: Connecticut USA

Re: Panda Hobby Panzer 38(T)

Post by c.rainford73 »

I will be following this one very closely. I absolutely enjoyed building mine and will aid you any way I can. I found a very helpful instruction guide from 35rctank that explains all the needed cuts and incisions needed to complete the build. I think mine came with the conversion kit.

There is also a gent on YouTube that also did the conversion from Mr Bix's neck of the woods (Australia that is....) that has a very informative video. It's a few years old.
Tanks alot.... :wave:
User avatar
silversurfer1947
Lieutenant
Posts: 3338
Joined: Tue Oct 27, 2015 9:54 pm
Location: Bristol, UK

Re: Panda Hobby Panzer 38(T)

Post by silversurfer1947 »

I have the instruction leaflet with the conversion kit. Apart from the tracks, all I have done so far is have a quick scan through both this and the actual kit instructions. All the kit parts are still sealed in their plastic bags. When I have cleared the decks in my work room, I shall study both documents in depth as well as going through Carl's thread again, before anything gets opened. My wish is to produce something that is as close as I can get. It will be difficut as the bar has been set very high.
Richard
Tamiya Tiger 1, Taigen FlakPanzer IV,Torro M16 half-track, Tamiya Panther,WSN/Torro T34,Taigen M41 Bulldog,H/l/Taigen Sherman M4A3,H/L T90, Haya M3 Grant, Metal Origins 234/2 Puma, Nashorn by Alwyn. I was only going to have one tank - honest! :D
User avatar
Model Builder 4
2nd Lieutenant
Posts: 2329
Joined: Sun Jul 26, 2015 3:46 pm
Location: South Wales valleys
Contact:

Re: Panda Hobby Panzer 38(T)

Post by Model Builder 4 »

Hi Richard,

Looking forward to seeing the build progress :D I have a static built version myself, I have been on the look out for a while for a set of the spade ace metal tracks as even on a static model the plastic tracks just seem to fall apart :thumbdown: hopefully you'll fare better with the metal set that you have :thumbup:

Cheers, Lee.
Last edited by Model Builder 4 on Mon Sep 09, 2019 9:00 am, edited 2 times in total.
Me ? Addicted ? Never !! :crazy:
User avatar
c.rainford73
Major
Posts: 6104
Joined: Thu Aug 25, 2016 7:34 pm
Location: Connecticut USA

Re: Panda Hobby Panzer 38(T)

Post by c.rainford73 »

I have the front metal sprockets on my resin hetzer build from Christian. They are really an improvement over the stock kit offerings. If I had the metal tracks I would have almost completed the tank by now. They are harder to come by than Hen's teeth I'm afraid as production has stopped as far as I know. With that being said, if I could source some plastic tracks I'd gladly drill them out. I'd hate to purchase an entire panzer 38t just for the tracks :wave:
Tanks alot.... :wave:
User avatar
Raminator
Warrant Officer 2nd Class
Posts: 1266
Joined: Tue Aug 11, 2015 9:57 am
Location: Newcastle, Australia

Re: Panda Hobby Panzer 38(T)

Post by Raminator »

I'll be following this with interest Richard, I've got a real soft spot for the little Czech that could. Nice work with the track assembly, I admire your patience and fingertip fortitude!

I'd assumed the Spade Ace tracks were pewter or something similar, given the fidelity of the casting and the colour; I'm not sure how the lead would react to the chemicals in the burnishing fluid if that's the case. Maybe try one link outdoors with respiratory protection?
User avatar
silversurfer1947
Lieutenant
Posts: 3338
Joined: Tue Oct 27, 2015 9:54 pm
Location: Bristol, UK

Re: Panda Hobby Panzer 38(T)

Post by silversurfer1947 »

Raminator wrote: I'd assumed the Spade Ace tracks were pewter or something similar, given the fidelity of the casting and the colour; I'm not sure how the lead would react to the chemicals in the burnishing fluid if that's the case. Maybe try one link outdoors with respiratory protection?
Thanks for the heads up. I had not given that side of things much thought. I have at least one duff casting with which I shall experiment. Just had a look on Wikipedia. Apparently, lead is only usually used in low grade pewter and Asian Pewter contains a higher percentage of tin, usually 97.5% tin, 1% copper, and 1.5% antimony. This makes the alloy slightly softer. I was quite surprised at this. Like you, I thought there was generally some lead in the mix.
The links are definitely on the soft side. I can cut it with a scalpel and push a pin through it, as I discovered by accident. I shall experiment with the treatment. One link and leave it while I carry on with the rest of the tank to give it a long as possible. Obviously, I can not forecast what will happen in years to come, but hopefully, all being well they will see my time out!
Richard
Tamiya Tiger 1, Taigen FlakPanzer IV,Torro M16 half-track, Tamiya Panther,WSN/Torro T34,Taigen M41 Bulldog,H/l/Taigen Sherman M4A3,H/L T90, Haya M3 Grant, Metal Origins 234/2 Puma, Nashorn by Alwyn. I was only going to have one tank - honest! :D
User avatar
silversurfer1947
Lieutenant
Posts: 3338
Joined: Tue Oct 27, 2015 9:54 pm
Location: Bristol, UK

Re: Panda Hobby Panzer 38(T)

Post by silversurfer1947 »

The instructions are proving interesting. I start with the kit instructions, but then have to read in the instructions from the conversion kit, but also have to splice in the instructions from the Henntec track tensioner! Fortunately, the track adjuster only affect area not touched by the conversion. The only thing that may have a bearing is whether I get the inner body insert from Christian Ludwig. The plastic body is nicely moulded, but is very thin and definitely needs strengthening. I am very conscious of the fire and uncertain when would be a suitable time to contact him. Does anyone know how things are with him now?
Richard
Tamiya Tiger 1, Taigen FlakPanzer IV,Torro M16 half-track, Tamiya Panther,WSN/Torro T34,Taigen M41 Bulldog,H/l/Taigen Sherman M4A3,H/L T90, Haya M3 Grant, Metal Origins 234/2 Puma, Nashorn by Alwyn. I was only going to have one tank - honest! :D
User avatar
Max-U52
Lieutenant
Posts: 3879
Joined: Sat Sep 12, 2015 8:56 pm
Location: Detroit

Re: Panda Hobby Panzer 38(T)

Post by Max-U52 »

Since these tanks are sold as toys, and lead is very harmful to Children, I'm not at all surprised to find that there's no lead there. If it did contain lead I'm sure at least a half a dozen different organizations would have gotten these things banned from United States sales already.
When FDR coined the phrase "The Arsenal of Democracy", he was talking about Detroit. Proud to live in the 2nd most violent city in America!!
Tiger6
Warrant Officer 2nd Class
Posts: 1286
Joined: Fri Mar 09, 2018 10:38 pm

Re: Panda Hobby Panzer 38(T)

Post by Tiger6 »

Max-U52 wrote:Since these tanks are sold as toys, and lead is very harmful to Children, I'm not at all surprised to find that there's no lead there. If it did contain lead I'm sure at least a half a dozen different organizations would have gotten these things banned from United States sales already.
Technically the Spade Ace track set isn't aimed at children, so you could get away with the lead content in the US. You are right in that it is banned from kids toys - you might remember the scandle from the late 2000's when they discovered that the toy companies had substituted even more toxic Cadmium in their pot metal mixtures to get around the lead testing :wtf:
I'm sure its no coincidence that the quality of the pot metal tracks and gear sets improved considerably around the same time frame... :shh:
Post Reply

Return to “Other Builds”