H/L Jagdpanther

[helifreak]

Thanks for the suggestions guys. Will try them all, one has gotta' work. Andrew

[Gigantohawk]

Andrew mate, don't keep us in suspense. How are you getting on with the idlers and all the rest of your upgrades ?

Nick,

[helifreak]

Nick, ...........Nick shame on you, you know we spend 25 hours a day 8 days a week at work, aint had any time to even think about it this week. let you know asap.Andy

[nw explorer]

To remove standard idlers,insert small cross head screwdriver down hole in idler.the screw is a coarse thread screwed directly into hull.
To fit idlers you will need to drill original hole out 4mm gives a nice tight fit.

[wibblywobbly]

He's right you know!

Rob G

[helifreak]

Yes he is most certainly right, came off like a dream. Many thanks guys much appreciated. cannot for the life of me think why I never thought of trying that before. Getting old I guess. However, How do you remove the wheels from the suspension, I need to replace the springs as they are far too soft.

And can the suspension arms be made to have a little less side play.

Any suggestions most welcome. Andrew

[wargar]

The hub caps on the road wheels definatly come off. Again there is a cross head underneath.

Dave

[helifreak]

Cheers Dave, will give a try. Andrew

[nw explorer]

Yes i was right

[nw explorer]

Re removing road wheels.
Looking at the hull left hand side looking from front remove wheels and suspension arms as a unit front to back,replace spring and re-assemble back of hull to front.
Right  hand side is done from back of hull to front.