Paint stripper for models
Forum rules
If your question is electronics related please post it in one of the relevant boards here: viewforum.php?f=31
If your question is electronics related please post it in one of the relevant boards here: viewforum.php?f=31
- jarndice
- Colonel
- Posts: 8023
- Joined: Mon Sep 03, 2012 11:27 am
- Location: the mountains of hertfordshire
Re: Paint stripper for models
Enamel Paint when applied over another paint often fails to be "Absorbed" into the previous layer, The enamel paint can then be peeled off by hand/finger nail giving you the opportunity to try the many helpful suggestions on this thread.
I think I am about to upset someone
-
- Recruit
- Posts: 1
- Joined: Sun Jul 28, 2019 8:36 pm
Re: Paint stripper for models
It will eat Plastics and melt itEastern Front wrote:I believe that carburetor cleaner will remove it real fast too, not sure if it stains the plastic though..
Sent from my SM-N960U using Tapatalk
Re: Paint stripper for models
Don't know where you are, Scarecrow,, but Imex has the ZTZ-99 on sale right this minute for a buck and a half. It sounds like you're fast approaching a level of frustration that supports a $150 expenditure to maintain the sanity levels. At least that's what you can tell your wife.
They also have each individual part and sub-assemblies on aliexpress so you could get an entire upper hull and turret for $90, or just the turret skin for about $16 and just the upper for about $22. Seems to me there's a point where it's just better to replace the parts rather than go through all the giref of repairs. Think of what all those fumes are doing to you, man!!
They also have each individual part and sub-assemblies on aliexpress so you could get an entire upper hull and turret for $90, or just the turret skin for about $16 and just the upper for about $22. Seems to me there's a point where it's just better to replace the parts rather than go through all the giref of repairs. Think of what all those fumes are doing to you, man!!
When FDR coined the phrase "The Arsenal of Democracy", he was talking about Detroit. Proud to live in the 2nd most violent city in America!!
- X82d Pathfinder
- Corporal
- Posts: 364
- Joined: Tue May 24, 2011 3:43 am
- Location: Colleyville, TX.
Re: Paint stripper for models
Easy Off Oven Cleaner. Yellow Can Version Only. The Blue Can won't get it done.
A Commander has to make vital decision on incomplete information in a matter of seconds, and afterwards the experts can sit down at leisure, with all the facts before them, and argue about what he might, could or should have done.- Sir William Slim
- silversurfer1947
- Lieutenant
- Posts: 3338
- Joined: Tue Oct 27, 2015 9:54 pm
- Location: Bristol, UK
Re: Paint stripper for models
Indications are that this is a US only product. It is listed on ebay.co.uk but from America, total cost including international shipping approx £24 a can.X82d Pathfinder wrote:Easy Off Oven Cleaner. Yellow Can Version Only. The Blue Can won't get it done.
Richard
Tamiya Tiger 1, Taigen FlakPanzer IV,Torro M16 half-track, Tamiya Panther,WSN/Torro T34,Taigen M41 Bulldog,H/l/Taigen Sherman M4A3,H/L T90, Haya M3 Grant, Metal Origins 234/2 Puma, Nashorn by Alwyn. I was only going to have one tank - honest!
Tamiya Tiger 1, Taigen FlakPanzer IV,Torro M16 half-track, Tamiya Panther,WSN/Torro T34,Taigen M41 Bulldog,H/l/Taigen Sherman M4A3,H/L T90, Haya M3 Grant, Metal Origins 234/2 Puma, Nashorn by Alwyn. I was only going to have one tank - honest!
- Son of a gun-ner
- Lieutenant-Colonel
- Posts: 6939
- Joined: Sun May 07, 2017 8:49 pm
- Location: Surrey UK
Re: Paint stripper for models
You wash your "parts" with dry cleaning solventEastern Front wrote:Hmmmm, gets me to thinking, I have a parts washer, wonder if that will work? It uses dry cleaning solvent so......
Cheers!
Mick - The grit in the underpants of life!
And always happy to spare the bytes
TOTM needs YOU support YOUR TOTM competition, I'm doing my part, are YOU?
And always happy to spare the bytes
TOTM needs YOU support YOUR TOTM competition, I'm doing my part, are YOU?
- jarndice
- Colonel
- Posts: 8023
- Joined: Mon Sep 03, 2012 11:27 am
- Location: the mountains of hertfordshire
Re: Paint stripper for models
Two nations separated by a common language
I think I am about to upset someone
Re: Paint stripper for models
Success !!
Bought some cheap brake fluid from ebay and its slowly, and I mean slowly, taking off even the enamel paint. So far, its been in there for two days now, no effect on the plastic! needs scrubbing but Ill tak ethat over watching my model turn to mush in front of my eyes!
Thanks for all your help. Hope to have a ZTZ to show later this year!
K
Bought some cheap brake fluid from ebay and its slowly, and I mean slowly, taking off even the enamel paint. So far, its been in there for two days now, no effect on the plastic! needs scrubbing but Ill tak ethat over watching my model turn to mush in front of my eyes!
Thanks for all your help. Hope to have a ZTZ to show later this year!
K
- X82d Pathfinder
- Corporal
- Posts: 364
- Joined: Tue May 24, 2011 3:43 am
- Location: Colleyville, TX.
Re: Paint stripper for models
Free advice: Don't use brake fluid if you plan on repainting, It's silicon based and the paint will not stick and it fish eyes.
-Dan
-Dan
A Commander has to make vital decision on incomplete information in a matter of seconds, and afterwards the experts can sit down at leisure, with all the facts before them, and argue about what he might, could or should have done.- Sir William Slim
- Son of a gun-ner
- Lieutenant-Colonel
- Posts: 6939
- Joined: Sun May 07, 2017 8:49 pm
- Location: Surrey UK
Re: Paint stripper for models
Brake cleaner will get that off, and shouldn't harm the plastic
Failing that, wonder wipes or a cheaper equivalent are designed to remove silicon and silicon based products.
Failing that, wonder wipes or a cheaper equivalent are designed to remove silicon and silicon based products.
Mick - The grit in the underpants of life!
And always happy to spare the bytes
TOTM needs YOU support YOUR TOTM competition, I'm doing my part, are YOU?
And always happy to spare the bytes
TOTM needs YOU support YOUR TOTM competition, I'm doing my part, are YOU?