Hello fellow tank enthusiasts. Yes, it is that time again.
Please feel free to submit a military modelling delight for our visual enjoyment.
As usual, you have 7 days to submit your models.
Also, as usual, anyone can enter apart from last month's winner.
We look forward to seeing what the following week brings.
June TOTM submission and now voting thread.
- Son of a gun-ner
- Lieutenant-Colonel
- Posts: 6931
- Joined: Sun May 07, 2017 8:49 pm
- Location: Surrey UK
June TOTM submission and now voting thread.
Mick - The grit in the underpants of life!
And always happy to spare the bytes
TOTM needs YOU support YOUR TOTM competition, I'm doing my part, are YOU?
And always happy to spare the bytes
TOTM needs YOU support YOUR TOTM competition, I'm doing my part, are YOU?
- Son of a gun-ner
- Lieutenant-Colonel
- Posts: 6931
- Joined: Sun May 07, 2017 8:49 pm
- Location: Surrey UK
Re: June TOTM submission thread.
Oh well, day five, no takers.
Guess I'll just play with myself then.
Mato M4A1 with a big gun. Bought by me, no idea who made it dirty.
Guess I'll just play with myself then.
Mato M4A1 with a big gun. Bought by me, no idea who made it dirty.
Mick - The grit in the underpants of life!
And always happy to spare the bytes
TOTM needs YOU support YOUR TOTM competition, I'm doing my part, are YOU?
And always happy to spare the bytes
TOTM needs YOU support YOUR TOTM competition, I'm doing my part, are YOU?
- PainlessWolf
- Lieutenant-Colonel
- Posts: 7407
- Joined: Sun Feb 26, 2012 9:09 pm
- Location: Southern Colorado Rocky Mountains
Re: June TOTM submission thread.
Here is my ( now getting on in years ) rendition of Sgt. Lafayette Pool's 1944 M4A1 76mm(w) . His third Sherman ( and the last ) to be shot out from under him. It will be a good one to set next to Mick's Sherman. This is a MATO hybrid build with the usual fixes like turret lowering and the chunky guards and attachment points removed and replaced with Tamiya and Schumo parts sets. Paint and plastic is by me. Paint is Model Masters rattlecans with Tamiya primer. Graphics are lettering templates made up by Palepainter from the Forum.
Build Thread: viewtopic.php?f=23&t=12575
Video: https://www.youtube.com/watch?v=z64924y1Kcg
Pics: Click to Enlarge
Build Thread: viewtopic.php?f=23&t=12575
Video: https://www.youtube.com/watch?v=z64924y1Kcg
Pics: Click to Enlarge
- Attachments
-
- 'In The Mood' goes to war (3)
- 'In The Mood' goes to war (3).jpg (98.53 KiB) Viewed 2424 times
...Here for the Dawn...
Re: June TOTM submission thread.
Hi.
Scratch built M8 Allis -Chalmers high speed tractor based on heavily modified Pershing wheels and suspension, Walker bulldog tracks x 2 sets , sprockets
, lower hull front and rear cut off pershing hull and replacement front and rear scratch built and grafted on. rest of it inc most of stowage.scratch built.
Airbrushed with tamiya acrylic mixed to give correct colour then patches lightened where sun would fade it etc
Rear lift goes up and down, dozer blade lifts up and angles backwards.
All made from A4 sheet styrene card, brass sheet and aluminium and styrene tube.
Storage area made from styrene card cut into planks then worked to represent wood and grain etc
Standard heng long electronics for now
All work inc airbrushing done by myself
Build link
viewtopic.php?f=23&t=26199
Hope its suitable
Scratch built M8 Allis -Chalmers high speed tractor based on heavily modified Pershing wheels and suspension, Walker bulldog tracks x 2 sets , sprockets
, lower hull front and rear cut off pershing hull and replacement front and rear scratch built and grafted on. rest of it inc most of stowage.scratch built.
Airbrushed with tamiya acrylic mixed to give correct colour then patches lightened where sun would fade it etc
Rear lift goes up and down, dozer blade lifts up and angles backwards.
All made from A4 sheet styrene card, brass sheet and aluminium and styrene tube.
Storage area made from styrene card cut into planks then worked to represent wood and grain etc
Standard heng long electronics for now
All work inc airbrushing done by myself
Build link
viewtopic.php?f=23&t=26199
Hope its suitable
Last edited by Sub on Thu Jun 06, 2019 10:07 am, edited 3 times in total.
-
- Corporal
- Posts: 497
- Joined: Wed Oct 28, 2015 4:22 am
- Location: Southern Indiana
Re: June TOTM submission thread.
And now for something completely different.
It's a scratch built Sd Kfz 223, based on a HL truck chassis. I sizeed up the plans to match the diameter of the tires, so it is a bit over sized for the scale. All the upper is framed ans skinned with sheet plastic. The mufflers are built up out of brass tube and copper wire. The turret is controlled off of the all wheel steering option on the radio. The front axle was moved forward to get the wheel base to match the drawings I was using. I also made the brackets for the ring aerial so that it can be raised and lowered.
A link to a short video showing the turret operation.
https://www.youtube.com/watch?v=zohKlq0FeEw
And a link to the build thread.
viewtopic.php?f=209&t=25283&hilit=sd+kfz+223
Thanks!
Bill
It's a scratch built Sd Kfz 223, based on a HL truck chassis. I sizeed up the plans to match the diameter of the tires, so it is a bit over sized for the scale. All the upper is framed ans skinned with sheet plastic. The mufflers are built up out of brass tube and copper wire. The turret is controlled off of the all wheel steering option on the radio. The front axle was moved forward to get the wheel base to match the drawings I was using. I also made the brackets for the ring aerial so that it can be raised and lowered.
A link to a short video showing the turret operation.
https://www.youtube.com/watch?v=zohKlq0FeEw
And a link to the build thread.
viewtopic.php?f=209&t=25283&hilit=sd+kfz+223
Thanks!
Bill
"Yeah, but it's a dry heat!"
Private Hudson (Bill Paxton) ALIENS
Private Hudson (Bill Paxton) ALIENS
- FredtheFrench
- Corporal
- Posts: 468
- Joined: Sun Feb 09, 2014 6:13 pm
- Location: Rennes. France
Re: June TOTM submission thread.
Like has said Ike Eisenhower june 5, " Let's go"...
Good evening everybody.
I m waited june the 6th to put for the first time, one of my models. This model, like you can see with the pictures, is a Sherman who has landed on Sword beach with the 13th/18th Royal Hussars during morning of june 6 1944.
It is a tribute for English soldiers and especially for this tank batallion, because a lot of people think the DD was a big mistake with US Army, but in fact was badly use in contrary with British army.
The caracteristics of the model are:
All features of a tank, but with the functional canvas. No lights...
Chassis from a Mato Sherman, with plastic wheels.
Metal tracks.
Upper hull and turret was made by Nick Aguilar in USA (but it was necessary to modifie the rear deck for a British Sherman DD).
The support for canvas was made in steel.
The frame for Canvas is from brass.
Canvas cutting and waterproof.
A lot of brass for details are from brass.
New paint job, with green color of British army.
Figure has been made and painted by my friend Yan.
Rear wheels made by 3D by Yan.
2 metal rear axle from Opel Blitz was necessary for use the propellers, with the rears wheels like the true Sherman.
Supply of a lot of package for the crew by my friend Bertrand.
Tank number 44 and 13th/18th Hussars emblem, painted with hands.
I hope you like this model.
Regards.
Fred.
Photos taken late afternoon, today. Just finished the tank, for this weekend and the annual models contest of Saumur Tank Museum.
Good evening everybody.
I m waited june the 6th to put for the first time, one of my models. This model, like you can see with the pictures, is a Sherman who has landed on Sword beach with the 13th/18th Royal Hussars during morning of june 6 1944.
It is a tribute for English soldiers and especially for this tank batallion, because a lot of people think the DD was a big mistake with US Army, but in fact was badly use in contrary with British army.
The caracteristics of the model are:
All features of a tank, but with the functional canvas. No lights...
Chassis from a Mato Sherman, with plastic wheels.
Metal tracks.
Upper hull and turret was made by Nick Aguilar in USA (but it was necessary to modifie the rear deck for a British Sherman DD).
The support for canvas was made in steel.
The frame for Canvas is from brass.
Canvas cutting and waterproof.
A lot of brass for details are from brass.
New paint job, with green color of British army.
Figure has been made and painted by my friend Yan.
Rear wheels made by 3D by Yan.
2 metal rear axle from Opel Blitz was necessary for use the propellers, with the rears wheels like the true Sherman.
Supply of a lot of package for the crew by my friend Bertrand.
Tank number 44 and 13th/18th Hussars emblem, painted with hands.
I hope you like this model.
Regards.
Fred.
Photos taken late afternoon, today. Just finished the tank, for this weekend and the annual models contest of Saumur Tank Museum.
Sorry for my spelling mistakes, I try to do better every day...