Timbered House Type A

User avatar
hotte8487
Sergeant
Posts: 732
Joined: Thu Aug 04, 2011 6:28 am
Location: Berlin, Germany

Re: Timbered House Type A

Post by hotte8487 »

Continued at the timber work; for the masonry has been used 1 cm thick styrodur plates,…

Image

The corresponding wall parts has been detached with a cutter knife.

Image

Image

Each part has been pushed in position.

Image

Image

Image

Image

At last has been all parts marked and find a new place in a box. A whole box full of wall parts…

Image

Next time it goes on.
Greeting Hotte

IG-Panzerjäger Berlin

HL Tiger I late (ElMod)
Torro Kingtiger (ElMod)
Tamiya Tiger I early (ElMod)
Tamiya Panther G (ElMod)

The thinking is allowed to all people, but many are spared. (Curt Goetz 1888-1960)
User avatar
Son of a gun-ner
Lieutenant-Colonel
Posts: 6865
Joined: Sun May 07, 2017 8:49 pm
Location: Surrey UK

Re: Timbered House Type A

Post by Son of a gun-ner »

:haha: Only you could have built it this way :clap: :clap:

I would have glued wooden or cardboard strips to a sheet of ply.
Mick - The grit in the underpants of life!
And always happy to spare the bytes

TOTM needs YOU :thumbup: support YOUR TOTM competition, I'm doing my part, are YOU?
User avatar
hotte8487
Sergeant
Posts: 732
Joined: Thu Aug 04, 2011 6:28 am
Location: Berlin, Germany

Re: Timbered House Type A

Post by hotte8487 »

After now all was prepared to build the walls is some point still missing – the preservation of the timber work with a simultaneously colouring of the outsides of timber work. For that was the varnish with oil paint coloured and thereafter started.

Image

Coloured have been only the outsides; inside was the varnish unchanged used.

Image

Image

Thereafter have been the first wall parts coloured with a white acrylic paint – often to see at timbered houses. Probably was a lime paint used.

Image

Meanwhile painting I’ve tried to receive a bit aged walls – afterwards less work. Some spallings in the plaster has been also displayed.

Image

The wall parts have been glued then into the timber; used was Latex Binder. This is after drying colourless and remains permanently flexible.

Image

Here is now the spalled wall part glued; view from a greater distance…

Image

…and this view a bit closer.

Image

Until the next time…
Greeting Hotte

IG-Panzerjäger Berlin

HL Tiger I late (ElMod)
Torro Kingtiger (ElMod)
Tamiya Tiger I early (ElMod)
Tamiya Panther G (ElMod)

The thinking is allowed to all people, but many are spared. (Curt Goetz 1888-1960)
User avatar
hotte8487
Sergeant
Posts: 732
Joined: Thu Aug 04, 2011 6:28 am
Location: Berlin, Germany

Re: Timbered House Type A

Post by hotte8487 »

It goes on; the bricklayer and the painter have their hands full.

Image

The first gable wall is finished.

Image

Mixed up it goes on;…

Image

…at the front side…

Image

…and also at the rear side.

Image

Image

Slowly is there an end in sight…

Image

Image

A last timber work is remaining.

Image

So looks the timbered house at the moment; from front,…

Image

…from left side,…

Image

…from rear…

Image

…and from the right side.

Image

For today that’s again all.
Greeting Hotte

IG-Panzerjäger Berlin

HL Tiger I late (ElMod)
Torro Kingtiger (ElMod)
Tamiya Tiger I early (ElMod)
Tamiya Panther G (ElMod)

The thinking is allowed to all people, but many are spared. (Curt Goetz 1888-1960)
User avatar
hotte8487
Sergeant
Posts: 732
Joined: Thu Aug 04, 2011 6:28 am
Location: Berlin, Germany

Re: Timbered House Type A

Post by hotte8487 »

My house will receive some functions; on the one hand of course light, this is especially for our yearly meeting at sunset and for the other hand a smoker, who will let both chimneys smoke. At the next step I’ve glued aluminium foil on the inside of the walls. This should prevent, that the light shines through some gaps.

Image

Glued was the foil again with Latex Binder.

Image

Image

Thereafter has been built a helping construction for battery, smoker unit, ventilation case and both chimneys.

Image

Both chimneys have been made from styropor rests and should look like masonry with a little concrete head.

Image

Both parts received scratches for the masonry; at the same time receive the little chimney one and the bigger chimney two smoke outlets.

Image

Then has the masonry been finished.

Image

My helping construction to receive my function unit was built from stripes and plywood.

Image

But before the windows are in row,…

Image

…this in the next report.
Greeting Hotte

IG-Panzerjäger Berlin

HL Tiger I late (ElMod)
Torro Kingtiger (ElMod)
Tamiya Tiger I early (ElMod)
Tamiya Panther G (ElMod)

The thinking is allowed to all people, but many are spared. (Curt Goetz 1888-1960)
User avatar
hotte8487
Sergeant
Posts: 732
Joined: Thu Aug 04, 2011 6:28 am
Location: Berlin, Germany

Re: Timbered House Type A

Post by hotte8487 »

Continuing with the construction of the windows. For that I’ve been used stripes 10 x 3 mm, a groove was milled, and all parts have been cut to length and mitred.

Image

After sanding I’ve been started to mount the single windows; at first only two thighs.

Image

The inner part is milled from polystyrene.

Image

These parts have been plugged into the groove and the frame have been completed with both lack parts. The first window is finished.

Image

Altogether have been 10 windows needed. Thereafter has been the roof box with a board with 3 mm thickness closed.

Image

It follows fit in of the windows in the corresponding openings; the first window sits in the timber work.

Image

Piece for piece has been completed,…

Image

Image

…until I’ve finished with this work. In conclusion for today still one view.

Image

Until the next time.
Greeting Hotte

IG-Panzerjäger Berlin

HL Tiger I late (ElMod)
Torro Kingtiger (ElMod)
Tamiya Tiger I early (ElMod)
Tamiya Panther G (ElMod)

The thinking is allowed to all people, but many are spared. (Curt Goetz 1888-1960)
User avatar
hotte8487
Sergeant
Posts: 732
Joined: Thu Aug 04, 2011 6:28 am
Location: Berlin, Germany

Re: Timbered House Type A

Post by hotte8487 »

Both chimneys were built from styropor-pieces. The drafts are made from aluminium square tube. The head of the chimney was made with tile glue; both chimneys are here already primed.

Image

Here both chimneys in their later positions…

Image

Thereafter I’ve painted both parts with a brick-red colour.

Image

Followed by the joints; painted in dark grey.

Image

The windows have been also primed…

Image

…and thereafter with a dark white brushed.

Image

Image

That’s all for today.
Greeting Hotte

IG-Panzerjäger Berlin

HL Tiger I late (ElMod)
Torro Kingtiger (ElMod)
Tamiya Tiger I early (ElMod)
Tamiya Panther G (ElMod)

The thinking is allowed to all people, but many are spared. (Curt Goetz 1888-1960)
User avatar
Son of a gun-ner
Lieutenant-Colonel
Posts: 6865
Joined: Sun May 07, 2017 8:49 pm
Location: Surrey UK

Re: Timbered House Type A

Post by Son of a gun-ner »

Excellent :clap: :clap:
Mick - The grit in the underpants of life!
And always happy to spare the bytes

TOTM needs YOU :thumbup: support YOUR TOTM competition, I'm doing my part, are YOU?
User avatar
hotte8487
Sergeant
Posts: 732
Joined: Thu Aug 04, 2011 6:28 am
Location: Berlin, Germany

Re: Timbered House Type A

Post by hotte8487 »

Son of a gun-ner wrote:Excellent :clap: :clap:
Thank you Sir! 8)
Greeting Hotte

IG-Panzerjäger Berlin

HL Tiger I late (ElMod)
Torro Kingtiger (ElMod)
Tamiya Tiger I early (ElMod)
Tamiya Panther G (ElMod)

The thinking is allowed to all people, but many are spared. (Curt Goetz 1888-1960)
User avatar
Rad_Schuhart
Warrant Officer 1st Class
Posts: 1979
Joined: Tue Jan 19, 2016 9:22 am
Location: Spanish living in Graz, Austria. Heart in UK.
Contact:

Re: Timbered House Type A

Post by Rad_Schuhart »

Dont stop, More photos!
My RC tanks website, loads of free info for everybody:
https://radindustries.wordpress.com/
Post Reply

Return to “Battlefield Buildings”