super pershing gun barrel dimensions
Forum rules
If your question is electronics related please post it in one of the relevant boards here: viewforum.php?f=31
If your question is electronics related please post it in one of the relevant boards here: viewforum.php?f=31
-
- Staff Sergeant
- Posts: 769
- Joined: Sat Oct 29, 2016 8:57 pm
- Location: Retford Nottinghamshire
super pershing gun barrel dimensions
Hi all, could somone help me out with the dimensions of the super pershing gun barrel, i have read the length
should be around 28cm for 1/16 but cant find diameter and does the barrel taper, if so i would like to know the diameter of either end.
regards john
should be around 28cm for 1/16 but cant find diameter and does the barrel taper, if so i would like to know the diameter of either end.
regards john
-
- Warrant Officer 1st Class
- Posts: 1665
- Joined: Tue Dec 25, 2018 11:28 pm
- Location: Centre France
Re: super pershing gun barrel dimensions
Hello,
Good evening,
Not the dimensions gun,but plenty of other informations
http://67400.free.fr/monsiteweb/Char%20 ... rshing.htm
Good evening,
Not the dimensions gun,but plenty of other informations
http://67400.free.fr/monsiteweb/Char%20 ... rshing.htm
Re: super pershing gun barrel dimensions
Dklm sell one for about $35 I think
-
- Warrant Officer 1st Class
- Posts: 1665
- Joined: Tue Dec 25, 2018 11:28 pm
- Location: Centre France
Re: super pershing gun barrel dimensions
Hello,
Good evening,
Not the dimensions gun,but plenty of other informations
http://67400.free.fr/monsiteweb/Char%20 ... rshing.htm
Good evening,
Not the dimensions gun,but plenty of other informations
http://67400.free.fr/monsiteweb/Char%20 ... rshing.htm
Re: super pershing gun barrel dimensions
John did you work it out?
I’m sure MK modellbau can make you a nice Aluminium one or Dklm does this one...
https://www.dklmrc.com/%5BDK%5D_Metal_B ... 17790.aspx
I’m sure MK modellbau can make you a nice Aluminium one or Dklm does this one...
https://www.dklmrc.com/%5BDK%5D_Metal_B ... 17790.aspx
-
- Staff Sergeant
- Posts: 769
- Joined: Sat Oct 29, 2016 8:57 pm
- Location: Retford Nottinghamshire
Re: super pershing gun barrel dimensions
Hi Adam and thanks for the link to the site, at the moment have to sort tracks and other items out for the
build so the barrel will have to wait a while, being a bit of a tight ass i was hoping to do a blue peter and mackle one together from sticky back plastic and milk bottle tops
i have 2 heng long pershing turrets so might be able to make an acceptable barrel from the two
regards john
build so the barrel will have to wait a while, being a bit of a tight ass i was hoping to do a blue peter and mackle one together from sticky back plastic and milk bottle tops
i have 2 heng long pershing turrets so might be able to make an acceptable barrel from the two
regards john
Re: super pershing gun barrel dimensions
I've stretched all of mine to the correct length for the standard 90mm, its quite simple to do as the alluminium BB inner barrel holds the whole thing together nicely.
Using a razor saw rather than a junior hacksaw will give you a neater cut that will cover up better
Using a razor saw rather than a junior hacksaw will give you a neater cut that will cover up better
-
- Staff Sergeant
- Posts: 769
- Joined: Sat Oct 29, 2016 8:57 pm
- Location: Retford Nottinghamshire
Re: super pershing gun barrel dimensions
Thank you for your info Tiger6
regards john
regards john