super pershing gun barrel dimensions

If you have a tank query and you can't find the answer anywhere else, post here. (TIP - Check for answers in FAQ, use the 'search' facility or even check this board before posting here).
Forum rules
If your question is electronics related please post it in one of the relevant boards here: viewforum.php?f=31
Post Reply
Ludwig von wigbearer
Staff Sergeant
Posts: 769
Joined: Sat Oct 29, 2016 8:57 pm
Location: Retford Nottinghamshire

super pershing gun barrel dimensions

Post by Ludwig von wigbearer »

Hi all, could somone help me out with the dimensions of the super pershing gun barrel, i have read the length
should be around 28cm for 1/16 but cant find diameter and does the barrel taper, if so i would like to know the diameter of either end.

regards john :wave:
Jofaur86
Warrant Officer 1st Class
Posts: 1663
Joined: Tue Dec 25, 2018 11:28 pm
Location: Centre France

Re: super pershing gun barrel dimensions

Post by Jofaur86 »

Hello,
Good evening,
Not the dimensions gun,but plenty of other informations :thumbup:
http://67400.free.fr/monsiteweb/Char%20 ... rshing.htm
User avatar
Ad Lav
Captain
Posts: 4154
Joined: Tue Sep 01, 2009 4:44 pm
Location: Kent

Re: super pershing gun barrel dimensions

Post by Ad Lav »

Dklm sell one for about $35 I think :)
Jofaur86
Warrant Officer 1st Class
Posts: 1663
Joined: Tue Dec 25, 2018 11:28 pm
Location: Centre France

Re: super pershing gun barrel dimensions

Post by Jofaur86 »

Jofaur86
Warrant Officer 1st Class
Posts: 1663
Joined: Tue Dec 25, 2018 11:28 pm
Location: Centre France

Re: super pershing gun barrel dimensions

Post by Jofaur86 »

Hello,
Good evening,
Not the dimensions gun,but plenty of other informations :thumbup:
http://67400.free.fr/monsiteweb/Char%20 ... rshing.htm
User avatar
Ad Lav
Captain
Posts: 4154
Joined: Tue Sep 01, 2009 4:44 pm
Location: Kent

Re: super pershing gun barrel dimensions

Post by Ad Lav »

John did you work it out?

I’m sure MK modellbau can make you a nice Aluminium one or Dklm does this one... :)

https://www.dklmrc.com/%5BDK%5D_Metal_B ... 17790.aspx
Ludwig von wigbearer
Staff Sergeant
Posts: 769
Joined: Sat Oct 29, 2016 8:57 pm
Location: Retford Nottinghamshire

Re: super pershing gun barrel dimensions

Post by Ludwig von wigbearer »

Hi Adam and thanks for the link to the site, at the moment have to sort tracks and other items out for the
build so the barrel will have to wait a while, being a bit of a tight ass i was hoping to do a blue peter and mackle one together from sticky back plastic and milk bottle tops ;)
i have 2 heng long pershing turrets so might be able to make an acceptable barrel from the two :thumbup:

regards john
Tiger6
Warrant Officer 2nd Class
Posts: 1286
Joined: Fri Mar 09, 2018 10:38 pm

Re: super pershing gun barrel dimensions

Post by Tiger6 »

I've stretched all of mine to the correct length for the standard 90mm, its quite simple to do as the alluminium BB inner barrel holds the whole thing together nicely.
Using a razor saw rather than a junior hacksaw will give you a neater cut that will cover up better :thumbup:
Ludwig von wigbearer
Staff Sergeant
Posts: 769
Joined: Sat Oct 29, 2016 8:57 pm
Location: Retford Nottinghamshire

Re: super pershing gun barrel dimensions

Post by Ludwig von wigbearer »

Thank you for your info Tiger6 :thumbup:

regards john :wave:
Post Reply

Return to “General Questions”