I have an El-mod fusion pro and a fusion Puma that i am planning on putting into my Panther D and 234/2 once i start work on them
I understand that the Tamiya battle system is the most commonly used however it is rather expensive, would it be better to get the Fusion IR battle system or the Tamiya? and is the Fusion battle system compatible with Tamiya?
Fusion battle system or Tamiya battle system?
Fusion battle system or Tamiya battle system?
Panther Ausf D (WIP)
Panther Ausf A mit Brückentafel (WIP)
Panther Ausf G (WIP)
Jagdpanther G2 (WIP)
Tiger II (WIP)
Pz.Kpfw. VIII Maus V2 (WIP)
Pz.Kpfw. II Ausf L (WIP)
Sd.Kfz. 234/2 (WIP)
Leopard 1A4/1A1A1 (WIP)
Turm III (WIP)
VK 45.01 (H) (WIP)
Panther Ausf A mit Brückentafel (WIP)
Panther Ausf G (WIP)
Jagdpanther G2 (WIP)
Tiger II (WIP)
Pz.Kpfw. VIII Maus V2 (WIP)
Pz.Kpfw. II Ausf L (WIP)
Sd.Kfz. 234/2 (WIP)
Leopard 1A4/1A1A1 (WIP)
Turm III (WIP)
VK 45.01 (H) (WIP)
Re: Fusion battle system or Tamiya battle system?
Hi Elmod do conversion leads have a look .
Re: Fusion battle system or Tamiya battle system?
Easy to make the leads and base, you just need the plug-in widget at the top of the TBU system (aka the 'apple' or 'mushroom') - sadly not generally available on its own tho.
Re: Fusion battle system or Tamiya battle system?
I meant can the fusion battle system fight tanks with the tamiya system? and would it be easier and cheaper to use the fusion battle system as opposed to the tamiya one?
Panther Ausf D (WIP)
Panther Ausf A mit Brückentafel (WIP)
Panther Ausf G (WIP)
Jagdpanther G2 (WIP)
Tiger II (WIP)
Pz.Kpfw. VIII Maus V2 (WIP)
Pz.Kpfw. II Ausf L (WIP)
Sd.Kfz. 234/2 (WIP)
Leopard 1A4/1A1A1 (WIP)
Turm III (WIP)
VK 45.01 (H) (WIP)
Panther Ausf A mit Brückentafel (WIP)
Panther Ausf G (WIP)
Jagdpanther G2 (WIP)
Tiger II (WIP)
Pz.Kpfw. VIII Maus V2 (WIP)
Pz.Kpfw. II Ausf L (WIP)
Sd.Kfz. 234/2 (WIP)
Leopard 1A4/1A1A1 (WIP)
Turm III (WIP)
VK 45.01 (H) (WIP)
Re: Fusion battle system or Tamiya battle system?
It can but you don't get the slope defence, 45 degree decent etc of tamiyaSTHV wrote:I meant can the fusion battle system fight tanks with the tamiya system? and would it be easier and cheaper to use the fusion battle system as opposed to the tamiya one?
Re: Fusion battle system or Tamiya battle system?
so what would you recommend i do?tomhugill wrote:It can but you don't get the slope defence, 45 degree decent etc of tamiyaSTHV wrote:I meant can the fusion battle system fight tanks with the tamiya system? and would it be easier and cheaper to use the fusion battle system as opposed to the tamiya one?
Panther Ausf D (WIP)
Panther Ausf A mit Brückentafel (WIP)
Panther Ausf G (WIP)
Jagdpanther G2 (WIP)
Tiger II (WIP)
Pz.Kpfw. VIII Maus V2 (WIP)
Pz.Kpfw. II Ausf L (WIP)
Sd.Kfz. 234/2 (WIP)
Leopard 1A4/1A1A1 (WIP)
Turm III (WIP)
VK 45.01 (H) (WIP)
Panther Ausf A mit Brückentafel (WIP)
Panther Ausf G (WIP)
Jagdpanther G2 (WIP)
Tiger II (WIP)
Pz.Kpfw. VIII Maus V2 (WIP)
Pz.Kpfw. II Ausf L (WIP)
Sd.Kfz. 234/2 (WIP)
Leopard 1A4/1A1A1 (WIP)
Turm III (WIP)
VK 45.01 (H) (WIP)
Re: Fusion battle system or Tamiya battle system?
If you are planing on joining a club (or are in one) then get a Tamiya unit - its more money, but its a factory standardised module that will work the same as everyone elses. Its also easier to make sockets and cables for your tanks, and swap the TBU between them - prewired 5 pin JST XH cables are easy to find if you look for Lipo balance charge leads. Currently there is a TBU on Ebay for 66 quid, its out in the far East but I've bought from that seller recently with no issues.
You can make a cover for the El-Mod unit that will mimic the Tamiya unit's shrouds, but you'll need a fair amount of trial and error to get it working the same way. When I built mine I was in a club that met regularly, and so it was easy to test different revisions of the design until we were all happy with it- back in those days El-Mod's electronics only worked with their battle units, so I didn't have the option of using the TBU.
Hope this helps?
You can make a cover for the El-Mod unit that will mimic the Tamiya unit's shrouds, but you'll need a fair amount of trial and error to get it working the same way. When I built mine I was in a club that met regularly, and so it was easy to test different revisions of the design until we were all happy with it- back in those days El-Mod's electronics only worked with their battle units, so I didn't have the option of using the TBU.
Hope this helps?
Re: Fusion battle system or Tamiya battle system?
thanks for the info, they only had one left but i have ordered itTiger6 wrote:If you are planing on joining a club (or are in one) then get a Tamiya unit - its more money, but its a factory standardised module that will work the same as everyone elses. Its also easier to make sockets and cables for your tanks, and swap the TBU between them - prewired 5 pin JST XH cables are easy to find if you look for Lipo balance charge leads. Currently there is a TBU on Ebay for 66 quid, its out in the far East but I've bought from that seller recently with no issues.
You can make a cover for the El-Mod unit that will mimic the Tamiya unit's shrouds, but you'll need a fair amount of trial and error to get it working the same way. When I built mine I was in a club that met regularly, and so it was easy to test different revisions of the design until we were all happy with it- back in those days El-Mod's electronics only worked with their battle units, so I didn't have the option of using the TBU.
Hope this helps?
Panther Ausf D (WIP)
Panther Ausf A mit Brückentafel (WIP)
Panther Ausf G (WIP)
Jagdpanther G2 (WIP)
Tiger II (WIP)
Pz.Kpfw. VIII Maus V2 (WIP)
Pz.Kpfw. II Ausf L (WIP)
Sd.Kfz. 234/2 (WIP)
Leopard 1A4/1A1A1 (WIP)
Turm III (WIP)
VK 45.01 (H) (WIP)
Panther Ausf A mit Brückentafel (WIP)
Panther Ausf G (WIP)
Jagdpanther G2 (WIP)
Tiger II (WIP)
Pz.Kpfw. VIII Maus V2 (WIP)
Pz.Kpfw. II Ausf L (WIP)
Sd.Kfz. 234/2 (WIP)
Leopard 1A4/1A1A1 (WIP)
Turm III (WIP)
VK 45.01 (H) (WIP)