Scratch build ypr 765

Niels jansen
Recruit
Posts: 35
Joined: Mon Feb 26, 2018 12:56 pm

Re: Scratch build ypr 765

Post by Niels jansen »

Still busy with the ypr 765.
Only im building now a second one with a 25mm canon.
PSX_20180711_135808.jpg
Snipermadrid
Recruit
Posts: 43
Joined: Sat Jul 24, 2010 10:42 pm

Re: Scratch build ypr 765

Post by Snipermadrid »

Good mornig for Spain NIels!

Good job, but I recommend put more photos with comments of these of process of build.
Do you have diagrams or drawings that you are using to make the pieces in evergreen? ;)

Thank you best regards. :wave:
Antonio
User avatar
43rdRecceReg
Major
Posts: 6295
Joined: Fri Jul 31, 2015 11:38 am
Location: North West Highlands, Scotland

Re: Scratch build ypr 765

Post by 43rdRecceReg »

Snipermadrid wrote:Good mornig for Spain NIels!

Good job, but I recommend put more photos with comments of these of process of build.
Do you have diagrams or drawings that you are using to make the pieces in evergreen? ;)

Thank you best regards. :wave:
Antonio
I agree with Antonio! More pics please, as well as details of materials used (glues, Styrene grades, and so on); tools, and tricks. All very educational for non-scratch builders, and those with moderate skills ( me, for example. :D ) :thumbup: Excellent handiwork!
Roy.
"Get your facts first, and then you can distort them as much as you please"- Mark Twain.
ronnie42
Staff Sergeant
Posts: 834
Joined: Sun Feb 04, 2018 11:00 am

Re: Scratch build ypr 765

Post by ronnie42 »

Nice work , like the turret . Did you use brass as it might take some abuse?
Niels jansen
Recruit
Posts: 35
Joined: Mon Feb 26, 2018 12:56 pm

Re: Scratch build ypr 765

Post by Niels jansen »

Hello guys.

Yes i know i need to post more pictures.
Problem is that i forget to take pictures and also i need to scale them down for this page to put on.

I just use the evergreen plates, tubes and rods.
Its easy to handle and to (super)glue together.

Ronnie42, i didnt use brass. Its only evergreen rod. Maybe i better use some brass. ;)

But hey this is a learbing curve also for me.
Dont be afraid guys to build something from scratch.
If you dont start you will never learn and get better.

I will post some mkre pictures later on.
Niels jansen
Recruit
Posts: 35
Joined: Mon Feb 26, 2018 12:56 pm

Re: Scratch build ypr 765

Post by Niels jansen »

Here are some more pictures.
PSX_20190209_001158.jpg
PSX_20190209_001345.jpg
PSX_20190209_001556.jpg
Model with excersion munition from the ypr.
Model with excersion munition from the ypr.
I have pictures of the real deal
I have pictures of the real deal
User avatar
Marco Peter
Sergeant
Posts: 717
Joined: Mon Jun 05, 2017 10:18 pm
Location: The Netherlands

Re: Scratch build ypr 765

Post by Marco Peter »

Really nice!

Goes? :D
1:16 was my scale. Until 'Konan' came into my life... an Armortek 1:6 Tiger 1!
... Now followed by a Panther G, 'Gunther'!

I'm a happy man. 8)
User avatar
BarryC
2nd Lieutenant
Posts: 2463
Joined: Sun Jan 03, 2016 11:43 am
Location: Savannah, GA. USA

Re: Scratch build ypr 765

Post by BarryC »

Very nice work Niels! :clap: You build talents are quite evident. :thumbup:

Barry
"Details make perfection, and perfection is not a detail."
Leonardo Da Vinci
Snipermadrid
Recruit
Posts: 43
Joined: Sat Jul 24, 2010 10:42 pm

Re: Scratch build ypr 765

Post by Snipermadrid »

Hi Niels!

Very good build, but need more photos of process of fabric :problem: :think: :{ :/
Thanks :D :wave:
Antonio.
Niels jansen
Recruit
Posts: 35
Joined: Mon Feb 26, 2018 12:56 pm

Re: Scratch build ypr 765

Post by Niels jansen »

Thanks guys.

@marco. Yes Goes here we come :D

I know i need to take more picures during building time.
But im to focused on pictures of the real deal and building.

Try to make them next time
Post Reply

Return to “Modern Builds”