Hi,
I have been looking at upgrading my electronics in my KV-1 and was considering a IBU2U board (base probably) but heard in one thread that there is a delayed control response when you start manoeuvres but not whilst conducting them. I would imagine this would be pretty annoying especially in battling. Just wanted to check whether or not this is still a problem as it would rather put me off them.
Cheers
Guy
IBU2U delayed control response?
Re: IBU2U delayed control response?
It seems someone has already done a video....
- c.rainford73
- Major
- Posts: 6104
- Joined: Thu Aug 25, 2016 7:34 pm
- Location: Connecticut USA
Re: IBU2U delayed control response?
I have several of these boards and have not had any delays as shown. You can change throttle and inertia curves.
https://youtu.be/53ss5wYXeXU
https://youtu.be/53ss5wYXeXU
Tanks alot....
- c.rainford73
- Major
- Posts: 6104
- Joined: Thu Aug 25, 2016 7:34 pm
- Location: Connecticut USA
Re: IBU2U delayed control response?
My panther has immediate drive response and brakes
On the IBU2U if you force the sticks quickly to full throttle in either direction it works like a neutral rev and my tank engine revs up and no drive as designed.
On the IBU2U if you force the sticks quickly to full throttle in either direction it works like a neutral rev and my tank engine revs up and no drive as designed.
Tanks alot....
- jackalope
- Lieutenant
- Posts: 3885
- Joined: Fri Jun 20, 2014 7:42 pm
- Location: Communist State of Maryland, United States.
Re: IBU2U delayed control response?
Inertia, biggest pain in the ass settings! Leave em off, tank responds instantly, zero delay.
Some like the inertia feature but for the life of me I can't see why.
Some like the inertia feature but for the life of me I can't see why.
- jarndice
- Colonel
- Posts: 8023
- Joined: Mon Sep 03, 2012 11:27 am
- Location: the mountains of hertfordshire
Re: IBU2U delayed control response?
Wyvern to remove inertia or indeed make adjustments to any part of the IBUs operation just remove the Micro-SD card from the IBU and put it into a card reader with a Micro card slot and put that into your puter where you can do pretty much what you want with the settings.
Last edited by jarndice on Sun Jan 20, 2019 9:39 pm, edited 1 time in total.
I think I am about to upset someone
Re: IBU2U delayed control response?
I've only had one ultimate, there was a slight delay to initial throttle response and once that was done, unless you stopped the tank it wouldnt exhibit the delay. This initial delay can't be turned off (source Ian of rctankelectrics) and was put in the protect the ESC. What richjohnson seems to show in the video is this coupled with inertia. But yes I couldn't battle with an ibu2ufo.
Re: IBU2U delayed control response?
Thanks for you responses guys - I am surprised that they put that delay in to protect the esc as the board afaik has re-settable fuses. Its the sort of thing that would annoy me if battling.
- Son of a gun-ner
- Lieutenant-Colonel
- Posts: 6939
- Joined: Sun May 07, 2017 8:49 pm
- Location: Surrey UK
Re: IBU2U delayed control response?
And then to make things worse, you can do what my grandson did, and accidentally turn on inertia overload.tomhugill wrote:I've only had one ultimate, there was a slight delay to initial throttle response and once that was done, unless you stopped the tank it wouldnt exhibit the delay. This initial delay can't be turned off (source Ian of rctankelectrics) and was put in the protect the ESC. What richjohnson seems to show in the video is this coupled with inertia. But yes I couldn't battle with an ibu2ufo.
Mick - The grit in the underpants of life!
And always happy to spare the bytes
TOTM needs YOU support YOUR TOTM competition, I'm doing my part, are YOU?
And always happy to spare the bytes
TOTM needs YOU support YOUR TOTM competition, I'm doing my part, are YOU?