DavidByrden wrote:The news is not good.Abe Froman wrote:
2. The watertight plate that is moulded onto the hull...should it be flat..Achtung shows it raised on lungs...does anyone have a pic of the real thing on a tiger?
David
ABE'S EARLY TIGER 1 BUILD
Forum rules
This section is for posting a build log of your Heng Long tank.
Questions relating to issues you are having with your tank(s) should be posted in the General Questions forum here: viewforum.php?f=14
This section is for posting a build log of your Heng Long tank.
Questions relating to issues you are having with your tank(s) should be posted in the General Questions forum here: viewforum.php?f=14
-
- Lance Corporal
- Posts: 153
- Joined: Wed Feb 11, 2015 10:00 am
Re: ABE'S EARLY TIGER 1 BUILD
-
- Lance Corporal
- Posts: 153
- Joined: Wed Feb 11, 2015 10:00 am
Re: ABE'S EARLY TIGER 1 BUILD
Hi all. This weekend I have been Working on the turret. The bin is mounted and I have replaced the Heng Long turret lifting points with the Tamiya parts. Next do do is the Aber brackets and the detail to the Smoke Launchers. Pics soon.
Take Care everyone
Derek
Take Care everyone
Derek
-
- Lance Corporal
- Posts: 153
- Joined: Wed Feb 11, 2015 10:00 am
Re: ABE'S EARLY TIGER 1 BUILD
Hi all, only been a year but I am back. How time flies when work gets in the way of your hobby.
I am thinking of toning down the tracks ( see page 7 of thread ). Any suggestions on a real world Tiger track colour?
BTW can we upload pics from a PC yet or do I still need a online photobucket type provider to upload from? If so any suggestions for good free ones?
I am thinking of toning down the tracks ( see page 7 of thread ). Any suggestions on a real world Tiger track colour?
BTW can we upload pics from a PC yet or do I still need a online photobucket type provider to upload from? If so any suggestions for good free ones?
Re: ABE'S EARLY TIGER 1 BUILD
Outstanding build thread! I’m working on my HL Tiger now and I have a question for you. I see that you eliminated the rear storage bin from the turret and covered the hole. I want to do this in order to add the early side pod bins but apparently the HL elevation unit protrudes through the rear of the turret and is hidden by the rear bin. Is this the case with your tank?
-
- Lance Corporal
- Posts: 153
- Joined: Wed Feb 11, 2015 10:00 am
Re: ABE'S EARLY TIGER 1 BUILD
Hi Jimster. I have removed the electronics and elevation parts as I am building a static. I did have to fill a hole though when I removed the bin so you could be right. If you are right and want to keep it RC then you may have a problem. I suggest you ask for help in a new thread, I am sure there are people that have encountered this problem already. Good luck with the search.
Drop by once in a while. I will go and search for your build thread.
Drop by once in a while. I will go and search for your build thread.
Re: ABE'S EARLY TIGER 1 BUILD
Thank you very much!
- HERMAN BIX
- Brigadier
- Posts: 10317
- Joined: Sun Jan 12, 2014 12:15 am
- Location: Gold Coast,Australia
Re: ABE'S EARLY TIGER 1 BUILD
Have a look in my Fehrman Tiger build Mr Jimster, you can see what’s involved there.Jimster wrote:Outstanding build thread! I’m working on my HL Tiger now and I have a question for you. I see that you eliminated the rear storage bin from the turret and covered the hole. I want to do this in order to add the early side pod bins but apparently the HL elevation unit protrudes through the rear of the turret and is hidden by the rear bin. Is this the case with your tank?
A lot will depend on your electronics, if you change elevation units the new one will need to operated off different control systems.
Mechanically it’s not a big job, it’s restoring the functionality that’s the tougher bit.
I will check in on your build thread.
HL JAGDPANTHER,HL TIGER 1,HL PzIII MUNITIONSCHLEPPER, HL KT OCTOPUS,HL PANTHER ZU-FUSS,HL STuG III,HL T34/85 BEDSPRING,
HL PZIV MALTA,MATORRO JAGDTIGER,HL F05 TIGER,TAMIYA KT,HL PANTHERDOZER,HL EARLY PANTHER G,TAIGEN/RAMINATOR T34/76,
HL AN-BRI-RAM SU-85
HL PZIV MALTA,MATORRO JAGDTIGER,HL F05 TIGER,TAMIYA KT,HL PANTHERDOZER,HL EARLY PANTHER G,TAIGEN/RAMINATOR T34/76,
HL AN-BRI-RAM SU-85
-
- Lance Corporal
- Posts: 153
- Joined: Wed Feb 11, 2015 10:00 am
Re: ABE'S EARLY TIGER 1 BUILD
Looking at reference pictures and at the Aber and Voyager etch I have, the etch looks very thin for the brackets so it looks like I will have to use the etch for dimensions and scratch build from plastic sheet!!! ARSE!
I am not sure on the thickness of the top bar of the bracket, but I imagine its in the region of 12mm, so that would suggest styrene sheet thickness of 0.75mm. Anyone agree?
Tracks have been repainted and sanded on the guide horns for wear. They will be weathered but as this is a Snow Tiger there will be masses of snow crammed inbetween the treads. I am thinking of using micro balloos for the snow. Anyone used them?
Laters Dudes
D
I am not sure on the thickness of the top bar of the bracket, but I imagine its in the region of 12mm, so that would suggest styrene sheet thickness of 0.75mm. Anyone agree?
Tracks have been repainted and sanded on the guide horns for wear. They will be weathered but as this is a Snow Tiger there will be masses of snow crammed inbetween the treads. I am thinking of using micro balloos for the snow. Anyone used them?
Laters Dudes
D
-
- Lance Corporal
- Posts: 153
- Joined: Wed Feb 11, 2015 10:00 am
Re: ABE'S EARLY TIGER 1 BUILD
Tracks and real brackets
-
- Lance Corporal
- Posts: 153
- Joined: Wed Feb 11, 2015 10:00 am
Re: ABE'S EARLY TIGER 1 BUILD
Hi Y'all
Is there any reference for the dimensions of the tool and cable brackets/clamps? I have mooched the net but found not a sausage.
And considering I am the Sausage King of Chicago....thats really annoying!
Is there any reference for the dimensions of the tool and cable brackets/clamps? I have mooched the net but found not a sausage.
And considering I am the Sausage King of Chicago....thats really annoying!