An interesting commission - Maultier panzerwerfer 42
- AlwynTurner
- 2nd Lieutenant
- Posts: 2597
- Joined: Thu Oct 23, 2014 10:47 am
- Location: Chapel-en-le-Frith, Derbyshire
Re: An interesting commission - Maultier panzerwerfer 42
Well that's the drive system sorted, the motor housing printed and installed
The drive shaft isn't 100% straight but close enough.
Now on to the suspension
Alwyn
The drive shaft isn't 100% straight but close enough.
Now on to the suspension
Alwyn
YOU'RE NEVER TOO OLD TO HAVE A HAPPY CHILDHOOD!
Saladin scratchbuild, Matilda scratchbuild, Churchill scratchbuild, Crusader scratchbuild, M10 Achiĺles scratchbuild, Universal Carrier scratchbuild
Saladin scratchbuild, Matilda scratchbuild, Churchill scratchbuild, Crusader scratchbuild, M10 Achiĺles scratchbuild, Universal Carrier scratchbuild
- Will01Capri
- 2nd Lieutenant
- Posts: 2704
- Joined: Tue Jul 18, 2017 5:34 pm
- Location: South Scotland
Re: An interesting commission - Maultier panzerwerfer 42
Cool suspension setup
Have you got all the bearings on those axles? Picture looks like you only got 2, but you need 4.
As for motor what you gonna use?
I working on a few twin mount at moment. But easily convert it over to single. I have different size motors and speeds and voltages for playing around with. I reckon a geared 25mm motor would work great and give you loads of torque
Have you got all the bearings on those axles? Picture looks like you only got 2, but you need 4.
As for motor what you gonna use?
I working on a few twin mount at moment. But easily convert it over to single. I have different size motors and speeds and voltages for playing around with. I reckon a geared 25mm motor would work great and give you loads of torque
HL camo E' Tiger
HL L' Tiger
M26 Pershing WW2 project
Tam K'Tiger project
HL Walker Bulldog project?
HL Panzer IV Munitionsschlepper für Karl-Gerät
HL Sherman project?
1/24 Leopard 2 Custom mod
2 many trucks to list!
HL L' Tiger
M26 Pershing WW2 project
Tam K'Tiger project
HL Walker Bulldog project?
HL Panzer IV Munitionsschlepper für Karl-Gerät
HL Sherman project?
1/24 Leopard 2 Custom mod
2 many trucks to list!
- AlwynTurner
- 2nd Lieutenant
- Posts: 2597
- Joined: Thu Oct 23, 2014 10:47 am
- Location: Chapel-en-le-Frith, Derbyshire
Re: An interesting commission - Maultier panzerwerfer 42
Hi Will, I didn't have space for the other 2 bearings as I had to steal the bearing space to fit the ends of the hex nuts. Can you point me at a suitable motor please, I can sort the housing out to suit my limited space. The WTP motor won't be powerful enough and the gearbox won't take it I don't think.
Thanks
Alwyn
Thanks
Alwyn
YOU'RE NEVER TOO OLD TO HAVE A HAPPY CHILDHOOD!
Saladin scratchbuild, Matilda scratchbuild, Churchill scratchbuild, Crusader scratchbuild, M10 Achiĺles scratchbuild, Universal Carrier scratchbuild
Saladin scratchbuild, Matilda scratchbuild, Churchill scratchbuild, Crusader scratchbuild, M10 Achiĺles scratchbuild, Universal Carrier scratchbuild
- AlwynTurner
- 2nd Lieutenant
- Posts: 2597
- Joined: Thu Oct 23, 2014 10:47 am
- Location: Chapel-en-le-Frith, Derbyshire
Re: An interesting commission - Maultier panzerwerfer 42
Well a tough day at the office!
I printed off the rest of the components for the suspension and did a trial fit. The suspension units were too big and didn't fit. So no problem thought I, just move the drive shaft and the idler out a bit to make more space. DUH, the tracks were too short and I didn't have spare track links.
Next plan, make the components smaller to fit, so I trimmed off a few mms from the idler and the road wheels, and suddenly realised I could also trim a few mms off the swing arms because the wheels were smaller - success, in fact it should be possible to take out a link from the track, but I'll leave that to Herman when he does his build giving him a couple of spare track links.
and here's the pile of scrap components from a very 'interesting' day as per the ancient Chinese curse!
Alls well that ends well. Just have to print off the components for the other side and build the spring units for the suspension, and revisit the front suspension and steering units with the new metal components.
Alwyn
I printed off the rest of the components for the suspension and did a trial fit. The suspension units were too big and didn't fit. So no problem thought I, just move the drive shaft and the idler out a bit to make more space. DUH, the tracks were too short and I didn't have spare track links.
Next plan, make the components smaller to fit, so I trimmed off a few mms from the idler and the road wheels, and suddenly realised I could also trim a few mms off the swing arms because the wheels were smaller - success, in fact it should be possible to take out a link from the track, but I'll leave that to Herman when he does his build giving him a couple of spare track links.
and here's the pile of scrap components from a very 'interesting' day as per the ancient Chinese curse!
Alls well that ends well. Just have to print off the components for the other side and build the spring units for the suspension, and revisit the front suspension and steering units with the new metal components.
Alwyn
YOU'RE NEVER TOO OLD TO HAVE A HAPPY CHILDHOOD!
Saladin scratchbuild, Matilda scratchbuild, Churchill scratchbuild, Crusader scratchbuild, M10 Achiĺles scratchbuild, Universal Carrier scratchbuild
Saladin scratchbuild, Matilda scratchbuild, Churchill scratchbuild, Crusader scratchbuild, M10 Achiĺles scratchbuild, Universal Carrier scratchbuild
- AlwynTurner
- 2nd Lieutenant
- Posts: 2597
- Joined: Thu Oct 23, 2014 10:47 am
- Location: Chapel-en-le-Frith, Derbyshire
Re: An interesting commission - Maultier panzerwerfer 42
Phew, printing all done! I took a link out and it is sitting just right. Just the springs and the front suspension to do tomorrow.
and with the motor in position
It's been a busy day but I'm really pleased with the end result.
Alwyn
and with the motor in position
It's been a busy day but I'm really pleased with the end result.
Alwyn
YOU'RE NEVER TOO OLD TO HAVE A HAPPY CHILDHOOD!
Saladin scratchbuild, Matilda scratchbuild, Churchill scratchbuild, Crusader scratchbuild, M10 Achiĺles scratchbuild, Universal Carrier scratchbuild
Saladin scratchbuild, Matilda scratchbuild, Churchill scratchbuild, Crusader scratchbuild, M10 Achiĺles scratchbuild, Universal Carrier scratchbuild
- midlife306
- Warrant Officer 1st Class
- Posts: 2238
- Joined: Sun Aug 27, 2017 10:34 am
Re: An interesting commission - Maultier panzerwerfer 42
Looks awesome Alwyn
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
- HERMAN BIX
- Brigadier
- Posts: 10318
- Joined: Sun Jan 12, 2014 12:15 am
- Location: Gold Coast,Australia
Re: An interesting commission - Maultier panzerwerfer 42
What’s to be said ?
The innovation and determination is mind blowing.
Even the consideration for the need for a spare track link, just astounding.
The radio system? What’s a recommended set up?
Obviously there’s no ‘42 sound set laying around but one of the “you-beaut “ systems might work.
Be a shame not to have sound at all.
With the rear running gear, would it be wise to get spare sprockets printed?
Just in case.
The innovation and determination is mind blowing.
Even the consideration for the need for a spare track link, just astounding.
The radio system? What’s a recommended set up?
Obviously there’s no ‘42 sound set laying around but one of the “you-beaut “ systems might work.
Be a shame not to have sound at all.
With the rear running gear, would it be wise to get spare sprockets printed?
Just in case.
HL JAGDPANTHER,HL TIGER 1,HL PzIII MUNITIONSCHLEPPER, HL KT OCTOPUS,HL PANTHER ZU-FUSS,HL STuG III,HL T34/85 BEDSPRING,
HL PZIV MALTA,MATORRO JAGDTIGER,HL F05 TIGER,TAMIYA KT,HL PANTHERDOZER,HL EARLY PANTHER G,TAIGEN/RAMINATOR T34/76,
HL AN-BRI-RAM SU-85
HL PZIV MALTA,MATORRO JAGDTIGER,HL F05 TIGER,TAMIYA KT,HL PANTHERDOZER,HL EARLY PANTHER G,TAIGEN/RAMINATOR T34/76,
HL AN-BRI-RAM SU-85
- AlwynTurner
- 2nd Lieutenant
- Posts: 2597
- Joined: Thu Oct 23, 2014 10:47 am
- Location: Chapel-en-le-Frith, Derbyshire
Re: An interesting commission - Maultier panzerwerfer 42
Hi Herman, thanks for the good words. Last night I discovered that Asiatam have lots of spares for their halftrack
https://www.asiatam.de/index.php?cat=c9 ... -1-16.html
This includes tyres, wheels, complete front suspension, sprockets, even a drive axle and a complete running chassis (if you have 310 euros to spare) although I think my chassis and suspension is a little better than theirs although their scaling is more accurate.
At least spares for tracks and sprockets are readily available Herman, although I will print off a spare set of brake drums as these are the only bits of the transmission that aren't bulletproof.
For the model you will need a four or six channel tx/rx, an ECU
Here is an example although there are lots - perhaps someone can recommend one?
https://www.ebay.co.uk/itm/Turnigy-20A- ... rk:24:pf:0
For sound there's the Dasmicro or equivalent
https://www.ebay.co.uk/itm/RC-Car-Truck ... ctupt=true
There's enough there to keep you busy, not to mentionbuilding the upper hull.
If you go with at least a 4 channel rx you will be able to have a rotate and elevate on the rocket launcher.
Alwyn
https://www.asiatam.de/index.php?cat=c9 ... -1-16.html
This includes tyres, wheels, complete front suspension, sprockets, even a drive axle and a complete running chassis (if you have 310 euros to spare) although I think my chassis and suspension is a little better than theirs although their scaling is more accurate.
At least spares for tracks and sprockets are readily available Herman, although I will print off a spare set of brake drums as these are the only bits of the transmission that aren't bulletproof.
For the model you will need a four or six channel tx/rx, an ECU
Here is an example although there are lots - perhaps someone can recommend one?
https://www.ebay.co.uk/itm/Turnigy-20A- ... rk:24:pf:0
For sound there's the Dasmicro or equivalent
https://www.ebay.co.uk/itm/RC-Car-Truck ... ctupt=true
There's enough there to keep you busy, not to mentionbuilding the upper hull.
If you go with at least a 4 channel rx you will be able to have a rotate and elevate on the rocket launcher.
Alwyn
YOU'RE NEVER TOO OLD TO HAVE A HAPPY CHILDHOOD!
Saladin scratchbuild, Matilda scratchbuild, Churchill scratchbuild, Crusader scratchbuild, M10 Achiĺles scratchbuild, Universal Carrier scratchbuild
Saladin scratchbuild, Matilda scratchbuild, Churchill scratchbuild, Crusader scratchbuild, M10 Achiĺles scratchbuild, Universal Carrier scratchbuild
Re: An interesting commission - Maultier panzerwerfer 42
I wouldn't use that speed controller, it doresn't have a reverse... I use these in all of my trucks:
https://www.ebay.co.uk/itm/20A-ESC-Brus ... 0005.m1851
https://www.ebay.co.uk/itm/20A-ESC-Brus ... 0005.m1851
- AlwynTurner
- 2nd Lieutenant
- Posts: 2597
- Joined: Thu Oct 23, 2014 10:47 am
- Location: Chapel-en-le-Frith, Derbyshire
Re: An interesting commission - Maultier panzerwerfer 42
Thanks Tiger that does look a better (and cheaper) option - there you go Herman. Can someone recommend a good sound unit to go with it?
Alwyn
Alwyn
YOU'RE NEVER TOO OLD TO HAVE A HAPPY CHILDHOOD!
Saladin scratchbuild, Matilda scratchbuild, Churchill scratchbuild, Crusader scratchbuild, M10 Achiĺles scratchbuild, Universal Carrier scratchbuild
Saladin scratchbuild, Matilda scratchbuild, Churchill scratchbuild, Crusader scratchbuild, M10 Achiĺles scratchbuild, Universal Carrier scratchbuild