1/6 t34 project, here we go
Re: 1/6 t34 project, here we go
Saracen,
Why did you grind your arms off?
I may do mine now I’m this far apart to correct the wheel alignment.
Why did you grind your arms off?
I may do mine now I’m this far apart to correct the wheel alignment.
Forced into tanks by a 9 year old.
Taigen tiger1 metal edition, 4:1 gearbox, mako2017,tiger ring
Torro King tiger, with ibu2u, fr7 and tarr ibu edition.
Tamiya Tiger 1 ElMod pro,tarr, twin speakers.
Taigen tiger1 metal edition, 4:1 gearbox, mako2017,tiger ring
Torro King tiger, with ibu2u, fr7 and tarr ibu edition.
Tamiya Tiger 1 ElMod pro,tarr, twin speakers.
Re: 1/6 t34 project, here we go
The fibreglass had deteriorated and couldn't support the weight of the tank, so all the wheels were splayed out.
This was supposed to be the first step to getting it into a metal lower hull, but then I found so many problems with the wheels, the suspension arms etc, that I just shelved it until I could have a fresh run at it.
Adrian.
This was supposed to be the first step to getting it into a metal lower hull, but then I found so many problems with the wheels, the suspension arms etc, that I just shelved it until I could have a fresh run at it.
Adrian.
Re: 1/6 t34 project, here we go
There is a lot of hull flex, mainly at the front so I will add braces to help.
Full steel chassis maybe later.
Do you know how to get the road wheels off?
Full steel chassis maybe later.
Do you know how to get the road wheels off?
Forced into tanks by a 9 year old.
Taigen tiger1 metal edition, 4:1 gearbox, mako2017,tiger ring
Torro King tiger, with ibu2u, fr7 and tarr ibu edition.
Tamiya Tiger 1 ElMod pro,tarr, twin speakers.
Taigen tiger1 metal edition, 4:1 gearbox, mako2017,tiger ring
Torro King tiger, with ibu2u, fr7 and tarr ibu edition.
Tamiya Tiger 1 ElMod pro,tarr, twin speakers.
- rolling-thunder
- Lance Corporal
- Posts: 225
- Joined: Sun Aug 13, 2017 11:58 pm
Re: 1/6 t34 project, here we go
May be a metal tub if you don't go for a full metal chassis?
I am the Law!
- midlife306
- Warrant Officer 1st Class
- Posts: 2238
- Joined: Sun Aug 27, 2017 10:34 am
1/6 t34 project, here we go
Thanks for the pics, the motors were surprisingly easy to find!
https://www.ebay.co.uk/i/151945828608?c ... faffd11d87
Cheers
Wayne
Sent from my iPhone using Tapatalk
https://www.ebay.co.uk/i/151945828608?c ... faffd11d87
Cheers
Wayne
Sent from my iPhone using Tapatalk
Re: 1/6 t34 project, here we go
> Do you know how to get the road wheels off?
On the ISU-152 they were just epoxied to the bearings. I heated them with a hot air gun to destroy the epoxy and pulled them off.
The bearings are odd paired things. I suppose a pair of new bearings with a spacer would work just the same.
Adrian.
On the ISU-152 they were just epoxied to the bearings. I heated them with a hot air gun to destroy the epoxy and pulled them off.
The bearings are odd paired things. I suppose a pair of new bearings with a spacer would work just the same.
Adrian.
Re: 1/6 t34 project, here we go
Batteries are now relocated and secured with a strap. so much happier with this.
Also wiring has been improved but needs some other changes.
I can now get the batteries out through the turret if needed.
So fist outing to Grandparents house with a large garden, all going great and sounding fine until
Chain to the right rear came off due to the rear sprocket coming loose, and jammed into the chassis so had to wheelbarrow back and attempt to fix but couldn't with limited tools.
Oh well tomorrows another day.
Also wiring has been improved but needs some other changes.
I can now get the batteries out through the turret if needed.
So fist outing to Grandparents house with a large garden, all going great and sounding fine until
Chain to the right rear came off due to the rear sprocket coming loose, and jammed into the chassis so had to wheelbarrow back and attempt to fix but couldn't with limited tools.
Oh well tomorrows another day.
Forced into tanks by a 9 year old.
Taigen tiger1 metal edition, 4:1 gearbox, mako2017,tiger ring
Torro King tiger, with ibu2u, fr7 and tarr ibu edition.
Tamiya Tiger 1 ElMod pro,tarr, twin speakers.
Taigen tiger1 metal edition, 4:1 gearbox, mako2017,tiger ring
Torro King tiger, with ibu2u, fr7 and tarr ibu edition.
Tamiya Tiger 1 ElMod pro,tarr, twin speakers.
- midlife306
- Warrant Officer 1st Class
- Posts: 2238
- Joined: Sun Aug 27, 2017 10:34 am
Re: 1/6 t34 project, here we go
Unlucky mate, the larger sprocket looks to be at an odd angle to the shaft.
It’ll mend
Cheers
Wayne
Sent from my iPhone using Tapatalk
It’ll mend
Cheers
Wayne
Sent from my iPhone using Tapatalk
Re: 1/6 t34 project, here we go
Motor to rear axle drive sprocket is about 5mm out of alignment on the side that came off and 3mm out on the other side, not sure wether to just fix the lot now by doing the steel chassis or keep plastering it until it breaks properly.
Forced into tanks by a 9 year old.
Taigen tiger1 metal edition, 4:1 gearbox, mako2017,tiger ring
Torro King tiger, with ibu2u, fr7 and tarr ibu edition.
Tamiya Tiger 1 ElMod pro,tarr, twin speakers.
Taigen tiger1 metal edition, 4:1 gearbox, mako2017,tiger ring
Torro King tiger, with ibu2u, fr7 and tarr ibu edition.
Tamiya Tiger 1 ElMod pro,tarr, twin speakers.
- c.rainford73
- Major
- Posts: 6104
- Joined: Thu Aug 25, 2016 7:34 pm
- Location: Connecticut USA
Re: 1/6 t34 project, here we go
I would consider fixing it right if budget allows. My reason for this is you may wind up paying for it in the end with damaged drivetrain parts and motors etc... much more to pay for and eventually it may have to be done right anyway
Tanks alot....