The first mod I did on my Matorro King Tiger was to ditch the feeble motors and plastic gearboxes with a set of Mato brass gears. This is a straight forward swap, open the hull, take out the plastic gearboxes, fit the Mato mounting plate then fit the gearboxes, simples!
The difference this makes to the drivability of the tank is amazing, a good reduction in speed and no problems turning on grass or carpet, always a struggle with the original gears and motors.
Gearbox swap
- jukebox
- Lance Corporal
- Posts: 110
- Joined: Sun Mar 13, 2011 10:50 pm
- Location: Great Yarmouth, Norfolk, U.K.
Gearbox swap
- Attachments
-
- Tiger II Gearbox mods 5.jpg (20.5 KiB) Viewed 5333 times
-
- Tiger II Gearbox mods 4.jpg (19.25 KiB) Viewed 5333 times
-
- Tiger II Gearbox mods 3.jpg (14.5 KiB) Viewed 5333 times
-
- Tiger II Gearbox mods 2.jpg (16.75 KiB) Viewed 5333 times
-
- Tiger II Gearbox mods 1.jpg (17.06 KiB) Viewed 5333 times
Steve
Re: Gearbox swap
Thanks for sharing,were their any problems or was the upgrade a perfect fit?
Urban dictionary-SAXONDOG-derogatory term for anglosaxon people
- jukebox
- Lance Corporal
- Posts: 110
- Joined: Sun Mar 13, 2011 10:50 pm
- Location: Great Yarmouth, Norfolk, U.K.
Re: Gearbox swap
Hi Saxondog, the gearboxes were a perfect fit, dropped straight in, and the original drive sprockets went on with no modifications needed. The gearboxes were supplied by Kin at Tankzone.
Steve
Re: Gearbox swap
Thanks, Their have been issues with gearbox installs as I'm sure you know, My early Asiatam Lower hull required modification,minor but still had to drill two mounting holes.
Would like to see your Torro Metal King Tiger?
Would like to see your Torro Metal King Tiger?
Urban dictionary-SAXONDOG-derogatory term for anglosaxon people
- jukebox
- Lance Corporal
- Posts: 110
- Joined: Sun Mar 13, 2011 10:50 pm
- Location: Great Yarmouth, Norfolk, U.K.
Re: Gearbox swap
Hi, thanks for the interest, I'll get myself organised and start a build post soon on the Torro King Tiger, I bought the parts over a few months and have now started putting it together, this work thing keeps getting in the way! In the meantime here's a teaser:
- Attachments
-
- Tiger II Build 01.jpg (20.44 KiB) Viewed 5315 times
Steve
Re: Gearbox swap
Excellent, I believe that would be the first TORRO King Tiger Build thread,any idea of the unit you may model? Sax
Urban dictionary-SAXONDOG-derogatory term for anglosaxon people
- jukebox
- Lance Corporal
- Posts: 110
- Joined: Sun Mar 13, 2011 10:50 pm
- Location: Great Yarmouth, Norfolk, U.K.
Re: Gearbox swap
Hi Sax, I have started the Torro King Tiger build post, it's in the Other Builds section.
Steve
Re: Gearbox swap
I've got a Torro King Tiger in finished as I've not got all the parts yet. It will have a Elmod Fusion Pro , but not sure which gearbox to instead either a 4:1 or 5:1. Not sure if I want to put a smoker in it as I'm not that impressed with the ones I've seen ro be honest.
Any advice greatly appreciated.
Any advice greatly appreciated.
1:16
HL King Tiger ET, Taig King Tiger PT, Tam King Tiger PT
HL Tiger 1 x2, Taig Panther G, Taig Panzer III
Taig JS-2, Taig T34-85, Mato M4A1BN, Mato M10, HL M4a3 105mm, Taig M4a3 76mm
HL King Tiger ET, Taig King Tiger PT, Tam King Tiger PT
HL Tiger 1 x2, Taig Panther G, Taig Panzer III
Taig JS-2, Taig T34-85, Mato M4A1BN, Mato M10, HL M4a3 105mm, Taig M4a3 76mm