Many thanks Mr. Bix, stay tuned...HERMAN BIX wrote:Also doubling as espionage weapons !!
Nice work Mr Hotte.............clever way to disguise James Bond assassination tools as humble but magnificent 1/6th power poles
Power supply for our village…
Re: Power supply for our village…
Greeting Hotte
IG-Panzerjäger Berlin
HL Tiger I late (ElMod)
Torro Kingtiger (ElMod)
Tamiya Tiger I early (ElMod)
Tamiya Panther G (ElMod)
The thinking is allowed to all people, but many are spared. (Curt Goetz 1888-1960)
IG-Panzerjäger Berlin
HL Tiger I late (ElMod)
Torro Kingtiger (ElMod)
Tamiya Tiger I early (ElMod)
Tamiya Panther G (ElMod)
The thinking is allowed to all people, but many are spared. (Curt Goetz 1888-1960)
Re: Power supply for our village…
In principle I had have the same idea. But we have a battlefield where we have to place our buildings each time new before we start and after our meetings we take the buildings back in our container.Rad_Schuhart wrote:Wonderfull job. I was planning to build the same (if someday I have hobby time again, lol) but my idea was to fit a battery inside, and to give power to those poles. Are you going to do the same?
But I think generally would it be possible...
Greeting Hotte
IG-Panzerjäger Berlin
HL Tiger I late (ElMod)
Torro Kingtiger (ElMod)
Tamiya Tiger I early (ElMod)
Tamiya Panther G (ElMod)
The thinking is allowed to all people, but many are spared. (Curt Goetz 1888-1960)
IG-Panzerjäger Berlin
HL Tiger I late (ElMod)
Torro Kingtiger (ElMod)
Tamiya Tiger I early (ElMod)
Tamiya Panther G (ElMod)
The thinking is allowed to all people, but many are spared. (Curt Goetz 1888-1960)
Re: Power supply for our village…
At the roof of the house it goes on; the roof skin was completed.
The gable sides were the next step, a strut was glued under the rafters.
The resulting areas were with little boards covered.
A view from inside. The inner frame was extended for a better hold of the roof.
As next was my prepared cornice glued to the walls.
My selected masonry measure fits super…
For a better rigidity receive my House a ceiling plate and…
…a bottom plate.
Soon continued…
The gable sides were the next step, a strut was glued under the rafters.
The resulting areas were with little boards covered.
A view from inside. The inner frame was extended for a better hold of the roof.
As next was my prepared cornice glued to the walls.
My selected masonry measure fits super…
For a better rigidity receive my House a ceiling plate and…
…a bottom plate.
Soon continued…
Greeting Hotte
IG-Panzerjäger Berlin
HL Tiger I late (ElMod)
Torro Kingtiger (ElMod)
Tamiya Tiger I early (ElMod)
Tamiya Panther G (ElMod)
The thinking is allowed to all people, but many are spared. (Curt Goetz 1888-1960)
IG-Panzerjäger Berlin
HL Tiger I late (ElMod)
Torro Kingtiger (ElMod)
Tamiya Tiger I early (ElMod)
Tamiya Panther G (ElMod)
The thinking is allowed to all people, but many are spared. (Curt Goetz 1888-1960)
Re: Power supply for our village…
The complete building receives from in- and outside a coat of construction adhesive; here the upper floor and...
…here the basement floor.
View through both windows…
Also the bottom plate receive a coat of construction adhesive.
By the way were additional insulators produced…
The front side of the house were prepared for the exits of the power cables.
Here a view with roof; meanwhile has this also received a coat of root tar and varnish.
After drying were additional sides of the house with construction adhesive plastered.
A view from the side…
As next were the windows prepared. From polystyrene made windows receive a frame of thin wood stripes.
The stripes receive before mounting a rabbit to hold the window parts.
Thereafter receive the window frames also a coat of root tar and varnish.
Until the next time…
…here the basement floor.
View through both windows…
Also the bottom plate receive a coat of construction adhesive.
By the way were additional insulators produced…
The front side of the house were prepared for the exits of the power cables.
Here a view with roof; meanwhile has this also received a coat of root tar and varnish.
After drying were additional sides of the house with construction adhesive plastered.
A view from the side…
As next were the windows prepared. From polystyrene made windows receive a frame of thin wood stripes.
The stripes receive before mounting a rabbit to hold the window parts.
Thereafter receive the window frames also a coat of root tar and varnish.
Until the next time…
Greeting Hotte
IG-Panzerjäger Berlin
HL Tiger I late (ElMod)
Torro Kingtiger (ElMod)
Tamiya Tiger I early (ElMod)
Tamiya Panther G (ElMod)
The thinking is allowed to all people, but many are spared. (Curt Goetz 1888-1960)
IG-Panzerjäger Berlin
HL Tiger I late (ElMod)
Torro Kingtiger (ElMod)
Tamiya Tiger I early (ElMod)
Tamiya Panther G (ElMod)
The thinking is allowed to all people, but many are spared. (Curt Goetz 1888-1960)
Re: Power supply for our village…
As next I took care of my door. They will be without function but should be a decent dummy.
The door boards were glued on the prepared door frame and thereafter preserved.
By the way were other walls plastered,...
…also insides of the power exits receive a coat from construction adhesive.
After drying were the walls with white acrylic painted; first inside.
The finished inner frame of my roof
The roof receives again a cover from roof cardboard - as at my barn roof. This has proven itself well in the meantime.
Little clamps hold the tracks together and by the way guaranteed this hang down at the sides.
And – by the way were further insulators produced.
For today that’s all.
The door boards were glued on the prepared door frame and thereafter preserved.
By the way were other walls plastered,...
…also insides of the power exits receive a coat from construction adhesive.
After drying were the walls with white acrylic painted; first inside.
The finished inner frame of my roof
The roof receives again a cover from roof cardboard - as at my barn roof. This has proven itself well in the meantime.
Little clamps hold the tracks together and by the way guaranteed this hang down at the sides.
And – by the way were further insulators produced.
For today that’s all.
Greeting Hotte
IG-Panzerjäger Berlin
HL Tiger I late (ElMod)
Torro Kingtiger (ElMod)
Tamiya Tiger I early (ElMod)
Tamiya Panther G (ElMod)
The thinking is allowed to all people, but many are spared. (Curt Goetz 1888-1960)
IG-Panzerjäger Berlin
HL Tiger I late (ElMod)
Torro Kingtiger (ElMod)
Tamiya Tiger I early (ElMod)
Tamiya Panther G (ElMod)
The thinking is allowed to all people, but many are spared. (Curt Goetz 1888-1960)
- Rad_Schuhart
- Warrant Officer 1st Class
- Posts: 1989
- Joined: Tue Jan 19, 2016 9:22 am
- Location: Spanish living in Graz, Austria. Heart in UK.
- Contact:
Re: Power supply for our village…
This is very interesting. What did you put in the building walls? Concrete? I mean, that thing that is placed between bricks in the buildings?
My RC tanks website, loads of free info for everybody:
https://radindustries.wordpress.com/
https://radindustries.wordpress.com/
Re: Power supply for our village…
I don't know what you mean concrete. The coat on the wall is made of tile glue; between the bricks comes later nothing else as paint.Rad_Schuhart wrote:This is very interesting. What did you put in the building walls? Concrete? I mean, that thing that is placed between bricks in the buildings?
Greeting Hotte
IG-Panzerjäger Berlin
HL Tiger I late (ElMod)
Torro Kingtiger (ElMod)
Tamiya Tiger I early (ElMod)
Tamiya Panther G (ElMod)
The thinking is allowed to all people, but many are spared. (Curt Goetz 1888-1960)
IG-Panzerjäger Berlin
HL Tiger I late (ElMod)
Torro Kingtiger (ElMod)
Tamiya Tiger I early (ElMod)
Tamiya Panther G (ElMod)
The thinking is allowed to all people, but many are spared. (Curt Goetz 1888-1960)
Re: Power supply for our village…
At my door it goes on. As next I’ve needed a door handle set; as base material for the blende I’ve used a rest from an etched part.
Here is the finished blende…
Thereafter I’ve made big insulators from my polystyrene round bar.
Looks like resistors…
The windows were fitted in…
A few views, from a greater distance…
…and here a clother view.
The coating of my walls is now finished; the structure is as I have imagined…
That’s all for today, next part soon.
Here is the finished blende…
Thereafter I’ve made big insulators from my polystyrene round bar.
Looks like resistors…
The windows were fitted in…
A few views, from a greater distance…
…and here a clother view.
The coating of my walls is now finished; the structure is as I have imagined…
That’s all for today, next part soon.
Greeting Hotte
IG-Panzerjäger Berlin
HL Tiger I late (ElMod)
Torro Kingtiger (ElMod)
Tamiya Tiger I early (ElMod)
Tamiya Panther G (ElMod)
The thinking is allowed to all people, but many are spared. (Curt Goetz 1888-1960)
IG-Panzerjäger Berlin
HL Tiger I late (ElMod)
Torro Kingtiger (ElMod)
Tamiya Tiger I early (ElMod)
Tamiya Panther G (ElMod)
The thinking is allowed to all people, but many are spared. (Curt Goetz 1888-1960)
Re: Power supply for our village…
Finishing of my roof is the next step on my plan; again were black acrylic paint used.
Further at the door and the door handle set. A door handle from brass was sold to a piece thread rod M2.
The blende was glued, the handle with thread rod with two nuts out- and inside fixed.
Okay for a dummy,…
…but the key hole was still drilled out.
As last were door bands produced; again were rests from etched parts used. The counterparts were bend from steel wire.
As next were all parts mounted…
Here a closer view to the door handle set.
Bottom receive the house a grey socket.
Further in the next part…
Further at the door and the door handle set. A door handle from brass was sold to a piece thread rod M2.
The blende was glued, the handle with thread rod with two nuts out- and inside fixed.
Okay for a dummy,…
…but the key hole was still drilled out.
As last were door bands produced; again were rests from etched parts used. The counterparts were bend from steel wire.
As next were all parts mounted…
Here a closer view to the door handle set.
Bottom receive the house a grey socket.
Further in the next part…
Greeting Hotte
IG-Panzerjäger Berlin
HL Tiger I late (ElMod)
Torro Kingtiger (ElMod)
Tamiya Tiger I early (ElMod)
Tamiya Panther G (ElMod)
The thinking is allowed to all people, but many are spared. (Curt Goetz 1888-1960)
IG-Panzerjäger Berlin
HL Tiger I late (ElMod)
Torro Kingtiger (ElMod)
Tamiya Tiger I early (ElMod)
Tamiya Panther G (ElMod)
The thinking is allowed to all people, but many are spared. (Curt Goetz 1888-1960)
Re: Power supply for our village…
In the next step receive the windows their glasses from transparent plastic film,…
…here always glued.
Thereafter were the windows permanent mounted; glued with transparent Latex. The equal work at the door.
A bit work at my bricks is still remaining; they receive a dark red colour.
The big insulators were mounted into the niches. As last were the masonry joints in grey coloured.
In the process I've made the experience, that the fugues don't have to be so deep, a little fugue is okay – for the next time.
In conclusion still two views …
Next part soon…
…here always glued.
Thereafter were the windows permanent mounted; glued with transparent Latex. The equal work at the door.
A bit work at my bricks is still remaining; they receive a dark red colour.
The big insulators were mounted into the niches. As last were the masonry joints in grey coloured.
In the process I've made the experience, that the fugues don't have to be so deep, a little fugue is okay – for the next time.
In conclusion still two views …
Next part soon…
Greeting Hotte
IG-Panzerjäger Berlin
HL Tiger I late (ElMod)
Torro Kingtiger (ElMod)
Tamiya Tiger I early (ElMod)
Tamiya Panther G (ElMod)
The thinking is allowed to all people, but many are spared. (Curt Goetz 1888-1960)
IG-Panzerjäger Berlin
HL Tiger I late (ElMod)
Torro Kingtiger (ElMod)
Tamiya Tiger I early (ElMod)
Tamiya Panther G (ElMod)
The thinking is allowed to all people, but many are spared. (Curt Goetz 1888-1960)