Next project, my Panther-G

Feel free to discuss anything and everything to do with tanking here!
User avatar
Rob59
Sergeant
Posts: 649
Joined: Wed Jul 04, 2018 6:14 pm
Location: Netherlands

Re: Next project, my Panther-G

Post by Rob59 »

I taped everything together while gluing it all to the hull.
After a few minutes it all could be taken off.

Image
Last edited by Rob59 on Sat Sep 08, 2018 4:04 pm, edited 1 time in total.
User avatar
Rob59
Sergeant
Posts: 649
Joined: Wed Jul 04, 2018 6:14 pm
Location: Netherlands

Re: Next project, my Panther-G

Post by Rob59 »

Image
User avatar
Rob59
Sergeant
Posts: 649
Joined: Wed Jul 04, 2018 6:14 pm
Location: Netherlands

Re: Next project, my Panther-G

Post by Rob59 »

I used a thin layer of Pattex woodglue on top of the superglue....just to be on the safe side... ;D
User avatar
Rob59
Sergeant
Posts: 649
Joined: Wed Jul 04, 2018 6:14 pm
Location: Netherlands

Re: Next project, my Panther-G

Post by Rob59 »

Image
User avatar
Rob59
Sergeant
Posts: 649
Joined: Wed Jul 04, 2018 6:14 pm
Location: Netherlands

Re: Next project, my Panther-G

Post by Rob59 »

Image
User avatar
Rob59
Sergeant
Posts: 649
Joined: Wed Jul 04, 2018 6:14 pm
Location: Netherlands

Re: Next project, my Panther-G

Post by Rob59 »

Imageh
User avatar
Rob59
Sergeant
Posts: 649
Joined: Wed Jul 04, 2018 6:14 pm
Location: Netherlands

Re: Next project, my Panther-G

Post by Rob59 »

Next I have to align the Schürzen a bit by bending some of the holders or even drill out some holes slightly larger.
Tomorrow it is supposed to become 25°C here so if there is some spare time, I will spray the Schürzen in the red anti rust primer.....the damn things are aluminum anyway... :haha: :haha: :haha:
User avatar
Rob59
Sergeant
Posts: 649
Joined: Wed Jul 04, 2018 6:14 pm
Location: Netherlands

Re: Next project, my Panther-G

Post by Rob59 »

The holders have to be cut into an appropriate length too when everything fits and is aligned the way I had in mind.
Brackets and holders will be painted in the matching camo colours on the hull too.
User avatar
Rob59
Sergeant
Posts: 649
Joined: Wed Jul 04, 2018 6:14 pm
Location: Netherlands

Re: Next project, my Panther-G

Post by Rob59 »

Just looked at my decal set.
Have no clue where it all is supposed to be on the Panther. I did expect a drawing which would have pointed out the spots where to put the decals.
I know, the numbers 003 go onto the turret :D
Both small Balkenkreuzen go on each side of the hull in front of the tools.
Where comes the bigger Balkenkreuz, if I will use it anyway.
One decal must be for the fire extinguisher, I think the yellow one with the text written on it.
But that green leave thing with the red N and the white panther jumping through it, where must that one go on my Panzer?
Front hull, driver's side perhaps?
User avatar
Rob59
Sergeant
Posts: 649
Joined: Wed Jul 04, 2018 6:14 pm
Location: Netherlands

Re: Next project, my Panther-G

Post by Rob59 »

Imageh
Post Reply

Return to “General Discussion”