After ten minutes with a multimeter I managed to unravel the wiring for the RX18 that is fitted to the T90. As this board has realistic Tiger/Leopard 2A6 sounds it is ideal for retrofitting to older tanks.
In order to fit it, you will need the new style transmitter, the new RX18, and the new socket that goes on the underside of the upper hull.
T90 RX18 Wiring Diagram
- wibblywobbly
- Major
- Posts: 6395
- Joined: Fri Oct 17, 2008 9:30 am
- Location: South Wales Valley
- Contact:
T90 RX18 Wiring Diagram
- Attachments
-
- IMG_20170809_175038.jpg (52.35 KiB) Viewed 24156 times
-
- T90 RX18 Wiring Diagram.png (52.33 KiB) Viewed 24156 times
Tiger 1 Late
Panther G
King Tiger
M36 B1
Panther G
King Tiger
M36 B1
- c.rainford73
- Major
- Posts: 6104
- Joined: Thu Aug 25, 2016 7:34 pm
- Location: Connecticut USA
Re: T90 RX18 Wiring Diagram
Fabulous work Mr Wibbly like you have just translated some ancient Egyptian hieroglyphics for as mere mortals on the forum. Now that's some serious detective work
Thank you!
Thank you!
Tanks alot....
-
- Corporal
- Posts: 292
- Joined: Sun Jul 17, 2011 9:11 pm
- Location: The Chilly and Flat part of the Netherlands' North.
Re: T90 RX18 Wiring Diagram
In the Gulf? No, I don't think so. Iraqi forces used T72's, and older T-series. However, the T-90 -as I understood- is basically a T-72 with a tuned engine, advanced counter measures, laser dazzlers, Anti IR thingies, and more advanced reactive armor bricks. Oh, and a remote control AA machine gun on the turret.Son of a gun-ner wrote:Well done sir
So, now I have to buy a couple of new T90's for the electrics to put in my old leopard and tiger?!
Then do something similar to what Mr Bix did to a T34 to the T90's for a modern battle field. . . . .
Were T90's used in the gulf?
Mick.
The HL T-90 under the fancy reactive armour bricks, uses a cast looking turret, like the older models, so, to a layman like me, with a bit of ingenuity, they can be made to look like Iraqi T-72's me thinks.
By the by, licmas panzer in Germany now has the 4th gen controller in stock. €39.- without p&p. You only need one transmitter of the 4th generation. The controller binds pretty easily to any 4th gen TX, I discovered.
Last edited by Jay-Em on Sat Aug 12, 2017 10:51 pm, edited 1 time in total.
Re: T90 RX18 Wiring Diagram
Plug into CN3 - Well that makes my tank shoot, recoil, and make a loud noise!! Thanks Sir!!
Now just how to wire the recoil remover in.
Be well,
Steve
Now just how to wire the recoil remover in.
Be well,
Steve
King Tiger, Panzer "G" model, Tiger 1, and one little Sherman.
Re: T90 RX18 Wiring Diagram
Hi on my challenger the 8 pin upper hull connection i have 9 wirers connected to it a 3 pin for lights and mg,a2 pin for a,soft,a 2 pin for elevation,a 2 pin for rotation, the a,soft positive is connected or link to the positive from the lights it is not a straight fit or change over you have to look at the solder contact under Neath the 8 pin board ,, pin six the green wire is positive to lights and mg,,plus supply to a,soft, i have connected my recoil unit positive to smoke unit,plus negative is to 8 pin this work better as no interfering with lights as before,,
time that's all it takes ,, TIGER 1,TIGER 2, PANTHER G, PANZER 4,KV1,T34,M3,M16,M4,M26,,251,CHAL
Re: T90 RX18 Wiring Diagram
Hi I have found that this diagram doesn't match the new system mainly that there is nine wires not eight,,,and the positive at lights is six and so on the picture 6 is 8 and 8 is 6 ,,, plus as I mentioned there is now 9 wires at the 8 pin connection,,,wibblywobbly wrote:After ten minutes with a multimeter I managed to unravel the wiring for the RX18 that is fitted to the T90. As this board has realistic Tiger/Leopard 2A6 sounds it is ideal for retrofitting to older tanks.
In order to fit it, you will need the new style transmitter, the new RX18, and the new socket that goes on the underside of the upper hull.
time that's all it takes ,, TIGER 1,TIGER 2, PANTHER G, PANZER 4,KV1,T34,M3,M16,M4,M26,,251,CHAL