T-14 Armata
T-14 Armata
hi.let me introduce my first RC tank - 3D printed T-14, scale 1/16.
at the first, i was just drawing Armata for printing myself one little static model to shelf.but i have drawed too much details so i have decided to print a big one to see that details.from there was only short way to go RC.
i am making that tank since november 2016 and i am printing second and final vehicle right now.
first was prototype with limited functions, mostly printed from PLA.i have tested all that stuff and redesigned whole vehicle according to experience with printing, assembling and test drives.
rework took another 6 months but i have fully-operational T-14 ready to print.
drawed completely with solidworks, printed on my own full-steel dyi printer.
few of the biggest improvements:
- completely reworked outer body
- optimized suspension system
- new mounts for suspensions
- better mounting for smoke generator
- new universal mounts for gearboxes, all holes ale blinded now
- universal sytem for cables organization added
- on/of switch under the hatch
- optimized traces for front lights cables (2 ways for every light)
- smaller turret rotation system
- added/removed some parts for easier printing and better details
- upper engine cover prepared for Mato MF3010 speakers
- videocamera on the side of the canon
- 2 different miniturrets (with 360° rotation or solid for IR battles )
- all rubber on tank is printable from flex now
- new servo-controlled canon
i am so excited from that second vehicle
i am printing some of the last parts right now and i have to prepare that beast for the paint.
using XTC-3D for surface finishing.tank is printed mostly from ASA (i love that filament), some parts have to be printed from PET(G), PMMA and FLEX.
first one was equipped with RX-18.now i have Elmod PRO for the second one because i have 4 servos in turret (and because is much better).
its designed to be equipped with wide range of heng-long/torro mechanic parts.long or short shaft gearboxes of different shapes (i have tried 4 types).HL airsoft or recoil unit (or servo controlled canon) etc.i can use HL T-90 tracks too, but i like my printed tracks (ABS).
first T-14 with tiger for scale
on the first show.problematic suspensions has been reworked
big part of second T-14 on the table (too much sanding)
detail of the second ones surface finish.XTC-3D and filler
second hull with reworked interior
new cover with Mato speakers
from the upside
some parts for the new turret
video of the recoil
and videocamera
at the first, i was just drawing Armata for printing myself one little static model to shelf.but i have drawed too much details so i have decided to print a big one to see that details.from there was only short way to go RC.
i am making that tank since november 2016 and i am printing second and final vehicle right now.
first was prototype with limited functions, mostly printed from PLA.i have tested all that stuff and redesigned whole vehicle according to experience with printing, assembling and test drives.
rework took another 6 months but i have fully-operational T-14 ready to print.
drawed completely with solidworks, printed on my own full-steel dyi printer.
few of the biggest improvements:
- completely reworked outer body
- optimized suspension system
- new mounts for suspensions
- better mounting for smoke generator
- new universal mounts for gearboxes, all holes ale blinded now
- universal sytem for cables organization added
- on/of switch under the hatch
- optimized traces for front lights cables (2 ways for every light)
- smaller turret rotation system
- added/removed some parts for easier printing and better details
- upper engine cover prepared for Mato MF3010 speakers
- videocamera on the side of the canon
- 2 different miniturrets (with 360° rotation or solid for IR battles )
- all rubber on tank is printable from flex now
- new servo-controlled canon
i am so excited from that second vehicle
i am printing some of the last parts right now and i have to prepare that beast for the paint.
using XTC-3D for surface finishing.tank is printed mostly from ASA (i love that filament), some parts have to be printed from PET(G), PMMA and FLEX.
first one was equipped with RX-18.now i have Elmod PRO for the second one because i have 4 servos in turret (and because is much better).
its designed to be equipped with wide range of heng-long/torro mechanic parts.long or short shaft gearboxes of different shapes (i have tried 4 types).HL airsoft or recoil unit (or servo controlled canon) etc.i can use HL T-90 tracks too, but i like my printed tracks (ABS).
first T-14 with tiger for scale
on the first show.problematic suspensions has been reworked
big part of second T-14 on the table (too much sanding)
detail of the second ones surface finish.XTC-3D and filler
second hull with reworked interior
new cover with Mato speakers
from the upside
some parts for the new turret
video of the recoil
and videocamera
facebook.com/warprints
- midlife306
- Warrant Officer 1st Class
- Posts: 2238
- Joined: Sun Aug 27, 2017 10:34 am
Re: T-14 Armata
OMG 50koruny, that looks absolutely breathtaking!!!!!
Quality job
Cheers
Wayne
Sent from my iPhone using Tapatalk
Quality job
Cheers
Wayne
Sent from my iPhone using Tapatalk
- AlwynTurner
- 2nd Lieutenant
- Posts: 2597
- Joined: Thu Oct 23, 2014 10:47 am
- Location: Chapel-en-le-Frith, Derbyshire
Re: T-14 Armata
That is one awesome build.
50koruny are you planning to make any of the STLs available on something like thingiverse, I am sure there would be many people who would love to build this model?
Alwyn
50koruny are you planning to make any of the STLs available on something like thingiverse, I am sure there would be many people who would love to build this model?
Alwyn
YOU'RE NEVER TOO OLD TO HAVE A HAPPY CHILDHOOD!
Saladin scratchbuild, Matilda scratchbuild, Churchill scratchbuild, Crusader scratchbuild, M10 Achiĺles scratchbuild, Universal Carrier scratchbuild
Saladin scratchbuild, Matilda scratchbuild, Churchill scratchbuild, Crusader scratchbuild, M10 Achiĺles scratchbuild, Universal Carrier scratchbuild
- midlife306
- Warrant Officer 1st Class
- Posts: 2238
- Joined: Sun Aug 27, 2017 10:34 am
Re: T-14 Armata
You could count me in on thatAlwynTurner wrote:That is one awesome build.
50koruny are you planning to make any of the STLs available on something like thingiverse, I am sure there would be many people who would love to build this model?
Alwyn
Cheers
Wayne
Sent from my iPhone using Tapatalk
Re: T-14 Armata
thank you.
i have some of my designs published on thingiverse (not related to RC) i like to publish a free files there
https://www.thingiverse.com/50koruny/designs
but this is not that kind of STLs.for example, there is 3400 sketches in basic hull model (basic 1/1 model of real hull).this Armata STLs is most valuable thing in my house right now.i am not sure what to do with that right now.
even if i wanted to publish that files, you are not able to assemble that kit without the assembly guide (non existing) because theres lots of things what need to be done in some order.for example - you need to put 3mm screw for smoke launcher axis before you put glue on the last part of the shield.if you dont make all in proper sequences you are not able to put that screws inside.making an assembly guide can take another 3-6 months of my life.
anyway, i am not that kind of people whats offering almost 2 years of work for free.sorry.
i like to design RC tanks and i want to make more of this.maybe i can try to ask UVZ for licence and become pro.
if it changes from dream to reality, I will be able to release at least one new tank yearly and make it even cheaper like heng-long.
ps.: next one will be STRV-103.
i have some of my designs published on thingiverse (not related to RC) i like to publish a free files there
https://www.thingiverse.com/50koruny/designs
but this is not that kind of STLs.for example, there is 3400 sketches in basic hull model (basic 1/1 model of real hull).this Armata STLs is most valuable thing in my house right now.i am not sure what to do with that right now.
even if i wanted to publish that files, you are not able to assemble that kit without the assembly guide (non existing) because theres lots of things what need to be done in some order.for example - you need to put 3mm screw for smoke launcher axis before you put glue on the last part of the shield.if you dont make all in proper sequences you are not able to put that screws inside.making an assembly guide can take another 3-6 months of my life.
anyway, i am not that kind of people whats offering almost 2 years of work for free.sorry.
i like to design RC tanks and i want to make more of this.maybe i can try to ask UVZ for licence and become pro.
if it changes from dream to reality, I will be able to release at least one new tank yearly and make it even cheaper like heng-long.
ps.: next one will be STRV-103.
facebook.com/warprints
- midlife306
- Warrant Officer 1st Class
- Posts: 2238
- Joined: Sun Aug 27, 2017 10:34 am
Re: T-14 Armata
I've sent you a PM
Ohh, the S-Tank is a favourite of mine
Cheers
Wayne
Sent from my iPad using Tapatalk
Ohh, the S-Tank is a favourite of mine
Cheers
Wayne
Sent from my iPad using Tapatalk
- c.rainford73
- Major
- Posts: 6104
- Joined: Thu Aug 25, 2016 7:34 pm
- Location: Connecticut USA
Re: T-14 Armata
thank you
i have to prepare that kit for painting now.need to take more photos.
i have some 3D model previews for now.
2 different configurations of the turret (3 canons)
turret is ready for both options.dont need to cut or drill.
overlay of heng-long airsoft gun overlay of my own servo-driven gun miniturret with 360° rotation and with heng-long IR receiver (static one).IR emitter is in the little hole beside the canon.in the tube off course. miniturret can be changed within 10 minutes.its just 2 screws there.
oh - and commanders hatch and that big service doors on the upside of the turret can be opened.big doors are used to feed the airsoft gun with balls and there is main switch under the commanders hatch.
i have to prepare that kit for painting now.need to take more photos.
i have some 3D model previews for now.
2 different configurations of the turret (3 canons)
turret is ready for both options.dont need to cut or drill.
overlay of heng-long airsoft gun overlay of my own servo-driven gun miniturret with 360° rotation and with heng-long IR receiver (static one).IR emitter is in the little hole beside the canon.in the tube off course. miniturret can be changed within 10 minutes.its just 2 screws there.
oh - and commanders hatch and that big service doors on the upside of the turret can be opened.big doors are used to feed the airsoft gun with balls and there is main switch under the commanders hatch.
facebook.com/warprints
Re: T-14 Armata
dzi?kuj?
i have turret prepared for XTC-3D coating, i will post some new photos soon.
Curing a XTC-3D can take 3-4 days, so i have to make that today.i need to send that Armata for final painting.season is coming and i dont have other tank.
i have turret prepared for XTC-3D coating, i will post some new photos soon.
Curing a XTC-3D can take 3-4 days, so i have to make that today.i need to send that Armata for final painting.season is coming and i dont have other tank.
facebook.com/warprints