Taigen type recoil question

If you have a tank query and you can't find the answer anywhere else, post here. (TIP - Check for answers in FAQ, use the 'search' facility or even check this board before posting here).
Forum rules
If your question is electronics related please post it in one of the relevant boards here: viewforum.php?f=31
Post Reply
User avatar
Lert
Sergeant
Posts: 543
Joined: Sat Apr 19, 2014 6:10 pm
Location: Duiven, Netherlands

Re: Taigen type recoil question

Post by Lert »

HERMAN BIX wrote:Could also need to place a loop wire from the positive on the yellow ended motor to the same terminal on the green ended motor.
But the heavy red wire needs to be soldered to the negative on your power switch as Mr Forgebear says.
This should restore the unit to full forward battery when you power it up.
Thats the limit of my help though :crazy:
This seems like a viable solution to try.

One thing I forgot to mention is that I'm using this turret in combination with a regular HL 2.4 GHz board.
JagdPanther / Leopard 2A6 / StuG Ausf. G / KV-2 / M4A3A4 / MTLB / 2.5 ton truck 6x6
Top
Post Reply

Return to “General Questions”