Tamiya Königstiger- a blitz build
Forum rules
This section is for posting a build log of your Tamiya tank.
Questions relating to issues you are having with your tank(s) should be posted in the General Questions forum here: viewforum.php?f=14
This section is for posting a build log of your Tamiya tank.
Questions relating to issues you are having with your tank(s) should be posted in the General Questions forum here: viewforum.php?f=14
- 43rdRecceReg
- Major
- Posts: 6294
- Joined: Fri Jul 31, 2015 11:38 am
- Location: North West Highlands, Scotland
Tamiya Königstiger- a blitz build
In time-honoured forum tradition, I'm launching into a new project before finishing my current one, the Cromwell. Well, the Cromwell is at the painting and testing stage, but I wanted a break, and what better than to build my very first
RC full-option Tamiya? I've been assembling the bits I need recently: the glues, the paints, the Tamiya side-cutters, and other recommended doo dahs, as well as a Futuba 'Attack' 4YWD TX/RX combo. Since Painless produced one of the definitive Tamiya builds recently- albeit the Tiger 1- I've decided to make this one a quick build. A blitz.
First the tank:
RC full-option Tamiya? I've been assembling the bits I need recently: the glues, the paints, the Tamiya side-cutters, and other recommended doo dahs, as well as a Futuba 'Attack' 4YWD TX/RX combo. Since Painless produced one of the definitive Tamiya builds recently- albeit the Tiger 1- I've decided to make this one a quick build. A blitz.
First the tank:
"Get your facts first, and then you can distort them as much as you please"- Mark Twain.
- 43rdRecceReg
- Major
- Posts: 6294
- Joined: Fri Jul 31, 2015 11:38 am
- Location: North West Highlands, Scotland
Re: Tamiya Königstiger- a blitz build
Next, the tools. I already had some choice ones from previous builds (Trumpeter razor saw and many more), but I really wanted to follow the instruction manual to the letter. That meant acquiring specific products, such as the mysterious
'rubber cement', as well as Tamiya metal primer etc. After the build, I'll see what needs upgrading. For the moment though, I want to see how good or bad the Tamiya KT is in bog standard form.
The Tools: A problem with backlighting, and so I've added a few different shots. Water of Life tool: an essential in any model Tanker's toolbox
'rubber cement', as well as Tamiya metal primer etc. After the build, I'll see what needs upgrading. For the moment though, I want to see how good or bad the Tamiya KT is in bog standard form.
The Tools: A problem with backlighting, and so I've added a few different shots. Water of Life tool: an essential in any model Tanker's toolbox
"Get your facts first, and then you can distort them as much as you please"- Mark Twain.
- 43rdRecceReg
- Major
- Posts: 6294
- Joined: Fri Jul 31, 2015 11:38 am
- Location: North West Highlands, Scotland
Re: Tamiya Königstiger- a blitz build
In preparation for the Cromwell's 'field trials' (no joke in my case, as my garden's surrounded by fields ), and for access to the KT and other tanks, I've been building a ramp to enable my Tanks to get in and out of the house under their own steam- so to speak. It's almost complete. But here my sternest critic is telling me how it should be done. She's a Backseat builder: a four-legged one at that ..
So, here's the Tank-ramp: This is the sort of trouble you go to, when the addiction is uncontrolled
On a positive note though, the next time I break my ankle and find myself in a wheelchair again; I'll be properly prepared
So, here's the Tank-ramp: This is the sort of trouble you go to, when the addiction is uncontrolled
On a positive note though, the next time I break my ankle and find myself in a wheelchair again; I'll be properly prepared
"Get your facts first, and then you can distort them as much as you please"- Mark Twain.
- 43rdRecceReg
- Major
- Posts: 6294
- Joined: Fri Jul 31, 2015 11:38 am
- Location: North West Highlands, Scotland
Re: Tamiya Königstiger- a blitz build
The package contents:
First, the metal bits. I'm going to clean them and spray them with Tamiya metal Primer. Them they'll get a coat of Humbrol primer from a rattle can. I have to say the hull and rolling gear bits have an encouraging precision feel. That's just as well, considering the arm and a leg that Tamiya products cost! I'll clean them up with some acrylic thinner, in readiness for the metal primer. Having primed the hull, I started fitting the suspension housings, being careful to fit them the right way round. Luckily, the illustrations in the build manual are clear and logical (unlike me sometimes )
First, the metal bits. I'm going to clean them and spray them with Tamiya metal Primer. Them they'll get a coat of Humbrol primer from a rattle can. I have to say the hull and rolling gear bits have an encouraging precision feel. That's just as well, considering the arm and a leg that Tamiya products cost! I'll clean them up with some acrylic thinner, in readiness for the metal primer. Having primed the hull, I started fitting the suspension housings, being careful to fit them the right way round. Luckily, the illustrations in the build manual are clear and logical (unlike me sometimes )
"Get your facts first, and then you can distort them as much as you please"- Mark Twain.
- 43rdRecceReg
- Major
- Posts: 6294
- Joined: Fri Jul 31, 2015 11:38 am
- Location: North West Highlands, Scotland
Re: Tamiya Königstiger- a blitz build
Now, it's time to fit the torsion bar stays. They're a bit fiddly for ageing fingers, and require a little dexterity and care to fit, but fit well when you have the knack.
'special tool' and choice expletives
Right, well that's enough for today....
The torsion bars won't fit if you're a millimetre or two out when pushing them in. They also require a tricky twist to lock them in. After a few successful inserts, the rest go in with increasing ease, without the need to resort to the Malt Whiskey'special tool' and choice expletives
Right, well that's enough for today....
"Get your facts first, and then you can distort them as much as you please"- Mark Twain.
Re: Tamiya Königstiger- a blitz build
The tamiya ones (unlike taigen) are flat not roundSon of a gun-ner wrote:There can never be enough tools
Love the tank ramp, will they have their own mat to wipe their fee. . . Tracks?
Well, can't expect a Scot not to have a bottle nearby love the emergency tool excuse
That looks a rather nice kit you have there, thank you for sharing, dead jealous. . . . But at least I got in a dig about the booze LOL.
Now, can I ask a favour please. Out of curiosity, what is the diameter of those tortion bars?
Mick.
Re: Tamiya Königstiger- a blitz build
Given the standard of previous work Roy, if this ends up as a blitz build I might eat my hat
- 43rdRecceReg
- Major
- Posts: 6294
- Joined: Fri Jul 31, 2015 11:38 am
- Location: North West Highlands, Scotland
Re: Tamiya Königstiger- a blitz build
Yep, if you click on the pic to enlarge it, Mick, you'll see that the bars are actually flat. They're probably about 8mm across I'd guess, but never thought to measure them. The key thing here is that they make for a precise fit. Almost tooSon of a gun-ner wrote:Oh, ok, thank you Tom.tomhugill wrote:The tamiya ones (unlike taigen) are flat not roundSon of a gun-ner wrote: Now, can I ask a favour please. Out of curiosity, what is the diameter of those tortion bars?
Mick.
precise to fit
"Get your facts first, and then you can distort them as much as you please"- Mark Twain.
- 43rdRecceReg
- Major
- Posts: 6294
- Joined: Fri Jul 31, 2015 11:38 am
- Location: North West Highlands, Scotland
Re: Tamiya Königstiger- a blitz build
, you might well be right there Tom But..just in case there's a spark of 'Blitz' here, I'd invest in an edible hat, if I were you Working from detailed instructions on a well documented model (Youtube and elsewhere), is a world part from almost making-it-up-as-you- go along with Chris' Ludwig kit... Mind you, I'm beginning to love the look of the Cromwell, and to appreciate the detailing it has to offer modellerstomhugill wrote:Given the standard of previous work Roy, if this ends up as a blitz build I might eat my hat
"Get your facts first, and then you can distort them as much as you please"- Mark Twain.
- 43rdRecceReg
- Major
- Posts: 6294
- Joined: Fri Jul 31, 2015 11:38 am
- Location: North West Highlands, Scotland
Re: Tamiya Königstiger- a blitz build
Now for the wheels...
I don't happen to have a decent rattle can of red-oxide primer hanging around, so after using Tamiya metal primer, I opted for this fetching shade of pink primer (Tamiya surface primer)
After priming the plastic parts of the running gear, I painted them with Tamiya Dunkelgelb:
The weather's been a tad unpredictable lately (yeah..what's new , eh?), so I've been driven into my old shed in order to do a spot of painting."Get your facts first, and then you can distort them as much as you please"- Mark Twain.