Left/right reversed
Forum rules
If your question is electronics related please post it in one of the relevant boards here: viewforum.php?f=31
If your question is electronics related please post it in one of the relevant boards here: viewforum.php?f=31
-
- Lance Corporal
- Posts: 169
- Joined: Sun Jul 09, 2017 8:32 am
Left/right reversed
Hello,
Recently updated the board in my Pz3 to a Taigen one and this involved soldering the wires to the motors. I soldered by looking at these gears:
http://m.heng-long-panzer.de/item/31313036
Funnily enough, forwards/backwards is fine but left right is reversed?
Could anyone point me to my mistake?
Thanks
Recently updated the board in my Pz3 to a Taigen one and this involved soldering the wires to the motors. I soldered by looking at these gears:
http://m.heng-long-panzer.de/item/31313036
Funnily enough, forwards/backwards is fine but left right is reversed?
Could anyone point me to my mistake?
Thanks
Re: Left/right reversed
Wrong wires to the wrong motors? Swap motors round?...
-
- Lance Corporal
- Posts: 169
- Joined: Sun Jul 09, 2017 8:32 am
Re: Left/right reversed
Well, checking with my Tiger gearbox, the wires seem to be right. I also tried swapping the motor cables on the board, but this resulted in forwards/reverse being reversed. How do you post a picture here?
- Marco Peter
- Sergeant
- Posts: 719
- Joined: Mon Jun 05, 2017 10:18 pm
- Location: The Netherlands
Re: Left/right reversed
Yeah, weird uh? Same happened to me: HL PzIV, standard RX board replaced by Taigen 2.4
We refitted the motor-wires the other way around. 2 times. No matter what we did: left and right were reversed!
So following this thread with interest!
We refitted the motor-wires the other way around. 2 times. No matter what we did: left and right were reversed!
So following this thread with interest!
1:16 was my scale. Until 'Konan' came into my life... an Armortek 1:6 Tiger 1!
... Now followed by a Panther G, 'Gunther'!
I'm a happy man.
... Now followed by a Panther G, 'Gunther'!
I'm a happy man.
-
- Lance Corporal
- Posts: 169
- Joined: Sun Jul 09, 2017 8:32 am
Re: Left/right reversed
Lol.... not good news. Thought this was just my incompetency but nope, an actual problem
- Rad_Schuhart
- Warrant Officer 1st Class
- Posts: 1989
- Joined: Tue Jan 19, 2016 9:22 am
- Location: Spanish living in Graz, Austria. Heart in UK.
- Contact:
Re: Left/right reversed
Swap motor connectos.
My RC tanks website, loads of free info for everybody:
https://radindustries.wordpress.com/
https://radindustries.wordpress.com/
-
- Lance Corporal
- Posts: 169
- Joined: Sun Jul 09, 2017 8:32 am
Re: Left/right reversed
Whats the easiest way to swap the wires in the connectors?
- Rad_Schuhart
- Warrant Officer 1st Class
- Posts: 1989
- Joined: Tue Jan 19, 2016 9:22 am
- Location: Spanish living in Graz, Austria. Heart in UK.
- Contact:
Re: Left/right reversed
What I mean, is I would plug the left motor in the right motor shocket and viceversa. Then if it does not work Id remove the wires from the white plugs and Id try more combinations. Hope it helps somehow...Blackadder123 wrote:Whats the easiest way to swap the wires in the connectors?
My RC tanks website, loads of free info for everybody:
https://radindustries.wordpress.com/
https://radindustries.wordpress.com/
-
- Lance Corporal
- Posts: 169
- Joined: Sun Jul 09, 2017 8:32 am
Re: Left/right reversed
I'll give the swapping wires in the "plugs" a go, but is there a technique for that? Could anyone link a video perhaps, really lack the terminology to search it up, lol.
- Rad_Schuhart
- Warrant Officer 1st Class
- Posts: 1989
- Joined: Tue Jan 19, 2016 9:22 am
- Location: Spanish living in Graz, Austria. Heart in UK.
- Contact:
Re: Left/right reversed
You are right, I meed to sleeep more.Son of a gun-ner wrote:He said he'd already tried swapping them lol.
Maybe he could desolder them, and swap the wires in the motor.
My RC tanks website, loads of free info for everybody:
https://radindustries.wordpress.com/
https://radindustries.wordpress.com/