MUNITIONS/SPARES TIGER.
Forum rules
This section is for posting a build log of your Heng Long tank.
Questions relating to issues you are having with your tank(s) should be posted in the General Questions forum here: viewforum.php?f=14
This section is for posting a build log of your Heng Long tank.
Questions relating to issues you are having with your tank(s) should be posted in the General Questions forum here: viewforum.php?f=14
- c.rainford73
- Major
- Posts: 6104
- Joined: Thu Aug 25, 2016 7:34 pm
- Location: Connecticut USA
Re: MUNITIONS/SPARES TIGER.
Eddie it's quite a lovely job you've done there. Somewhat resembles an elephant casemate from the front
The details inside are incredibly well done.
Like the hatch you designed too
The details inside are incredibly well done.
Like the hatch you designed too
Tanks alot....
Re: MUNITIONS/SPARES TIGER.
LOL, it is supposed to be severe chipping...told I may have gone slightly over the topSon of a gun-ner wrote:Excellent
Think I'd wash off the dried blood stains on the second to last picture before the CSI lot turn up, unless it's the blonde. . . .
Mick.
Re: MUNITIONS/SPARES TIGER.
Thank you, done the front hatches inside and sprayed the lower hull this evening...getting there.c.rainford73 wrote:Eddie it's quite a lovely job you've done there. Somewhat resembles an elephant casemate from the front
The details inside are incredibly well done.
Like the hatch you designed too
- Jake79
- Warrant Officer 2nd Class
- Posts: 1058
- Joined: Mon Aug 11, 2014 9:10 pm
- Location: Essex,Colchester, UK
Re: MUNITIONS/SPARES TIGER.
Enyoing this one too, weathering looks spot on in the last pic, maybe a little heavy handed on the right side, still looks great tho.
Tamiya: 2 King Tigers
H/L,Taigen :Initial Tiger 1, Panzer III, Kv 2, Panther G, Bulldog, Leo 2A6
H/L,Taigen :Initial Tiger 1, Panzer III, Kv 2, Panther G, Bulldog, Leo 2A6
- Jake79
- Warrant Officer 2nd Class
- Posts: 1058
- Joined: Mon Aug 11, 2014 9:10 pm
- Location: Essex,Colchester, UK
Re: MUNITIONS/SPARES TIGER.
Enyoing this one too! chipping maybe a little heavy handed on the right side, still looks great tho. Weathering looks spot on in the last pic
Tamiya: 2 King Tigers
H/L,Taigen :Initial Tiger 1, Panzer III, Kv 2, Panther G, Bulldog, Leo 2A6
H/L,Taigen :Initial Tiger 1, Panzer III, Kv 2, Panther G, Bulldog, Leo 2A6
Re: MUNITIONS/SPARES TIGER.
My measurements were slightly off, not by much but I needed to add some 2mm plasticard to the sides, all glued and then welds produced-should look okay when painted and weathered. Only one side done at the moment, will get around to the other side later on.
One thing I dislike about Taigen top hulls is that the tools are pre-moulded. So, it was sand off or have a go with dodgy fingers, so I had a go at painting as it was the easiest option.
Painted tools, all I need to touch up and painted the inside of the hatches.
https://scontent-lht6-1.xx.fbcdn.net/v/ ... e=59ED5575
https://scontent-lht6-1.xx.fbcdn.net/v/ ... e=5A373EAA
https://scontent-lht6-1.xx.fbcdn.net/v/ ... e=5A05617E
https://scontent-lht6-1.xx.fbcdn.net/v/ ... e=59EDE34B
https://scontent-lht6-1.xx.fbcdn.net/v/ ... e=5A39533E
One thing I dislike about Taigen top hulls is that the tools are pre-moulded. So, it was sand off or have a go with dodgy fingers, so I had a go at painting as it was the easiest option.
Painted tools, all I need to touch up and painted the inside of the hatches.
https://scontent-lht6-1.xx.fbcdn.net/v/ ... e=59ED5575
https://scontent-lht6-1.xx.fbcdn.net/v/ ... e=5A373EAA
https://scontent-lht6-1.xx.fbcdn.net/v/ ... e=5A05617E
https://scontent-lht6-1.xx.fbcdn.net/v/ ... e=59EDE34B
https://scontent-lht6-1.xx.fbcdn.net/v/ ... e=5A39533E
Re: MUNITIONS/SPARES TIGER.
Yeah, slightly over the top. but there will a compressor fitted so my excuse is that the wall is more scuffedJake79 wrote:Enyoing this one too! chipping maybe a little heavy handed on the right side, still looks great tho. Weathering looks spot on in the last pic
Re: MUNITIONS/SPARES TIGER.
Another update.
Got both sides on and painted, interior finished and the casement is fitted.
Interior has radio fitted with earphones, large tarp cover and compressor added and a ammo box.
First round of weathering on initial P-grey using a slightly lighter grey to give a worn effect, then a black oil was sponged on and left to dry.
Side carrier made housing grease tins and Jerry-cans.
Still loads to do before this is finished and I can start on the lower hull and wheels.
https://scontent-lht6-1.xx.fbcdn.net/v/ ... e=5A2EEBF4
https://scontent-lht6-1.xx.fbcdn.net/v/ ... e=59EB1096
https://scontent-lht6-1.xx.fbcdn.net/v/ ... e=59F4E441
https://scontent-lht6-1.xx.fbcdn.net/v/ ... e=5A356040
https://scontent-lht6-1.xx.fbcdn.net/v/ ... e=5A376D5E
https://scontent-lht6-1.xx.fbcdn.net/v/ ... e=5A30CCEE
https://scontent-lht6-1.xx.fbcdn.net/v/ ... e=59EE718B
Si:)
Got both sides on and painted, interior finished and the casement is fitted.
Interior has radio fitted with earphones, large tarp cover and compressor added and a ammo box.
First round of weathering on initial P-grey using a slightly lighter grey to give a worn effect, then a black oil was sponged on and left to dry.
Side carrier made housing grease tins and Jerry-cans.
Still loads to do before this is finished and I can start on the lower hull and wheels.
https://scontent-lht6-1.xx.fbcdn.net/v/ ... e=5A2EEBF4
https://scontent-lht6-1.xx.fbcdn.net/v/ ... e=59EB1096
https://scontent-lht6-1.xx.fbcdn.net/v/ ... e=59F4E441
https://scontent-lht6-1.xx.fbcdn.net/v/ ... e=5A356040
https://scontent-lht6-1.xx.fbcdn.net/v/ ... e=5A376D5E
https://scontent-lht6-1.xx.fbcdn.net/v/ ... e=5A30CCEE
https://scontent-lht6-1.xx.fbcdn.net/v/ ... e=59EE718B
Si:)
Re: MUNITIONS/SPARES TIGER.
Big update on this.
Got the lower hull sorted, added electrics, gearboxes etc, got the metal sprockets and idlers on and all the road wheels so now have a rolling chassis. Just got to do some weathering on the lower hull.
Got the top section, with the quick release system sorted as one of the clips was sticking but the two marry up now.
Got my other Tiger out to show the comparison, I think it works rather well.
https://scontent-lht6-1.xx.fbcdn.net/v/ ... e=59F93EBA
https://scontent-lht6-1.xx.fbcdn.net/v/ ... e=5A2BC728
https://scontent-lht6-1.xx.fbcdn.net/v/ ... e=5A312AF9
https://scontent-lht6-1.xx.fbcdn.net/v/ ... e=59F684E0
https://scontent-lht6-1.xx.fbcdn.net/v/ ... e=5A337EEE
https://scontent-lht6-1.xx.fbcdn.net/v/ ... e=5A394AB6
https://scontent-lht6-1.xx.fbcdn.net/v/ ... e=5A24DE3E
Si:)
Got the lower hull sorted, added electrics, gearboxes etc, got the metal sprockets and idlers on and all the road wheels so now have a rolling chassis. Just got to do some weathering on the lower hull.
Got the top section, with the quick release system sorted as one of the clips was sticking but the two marry up now.
Got my other Tiger out to show the comparison, I think it works rather well.
https://scontent-lht6-1.xx.fbcdn.net/v/ ... e=59F93EBA
https://scontent-lht6-1.xx.fbcdn.net/v/ ... e=5A2BC728
https://scontent-lht6-1.xx.fbcdn.net/v/ ... e=5A312AF9
https://scontent-lht6-1.xx.fbcdn.net/v/ ... e=59F684E0
https://scontent-lht6-1.xx.fbcdn.net/v/ ... e=5A337EEE
https://scontent-lht6-1.xx.fbcdn.net/v/ ... e=5A394AB6
https://scontent-lht6-1.xx.fbcdn.net/v/ ... e=5A24DE3E
Si:)
- c.rainford73
- Major
- Posts: 6104
- Joined: Thu Aug 25, 2016 7:34 pm
- Location: Connecticut USA
Re: MUNITIONS/SPARES TIGER.
Eddie it really looks nice I'm thinking what you may want to add is some type of crane to either the front corner fender or on the rear section of the tank just to give it that more and mechanical look that kind of can carry heavy loads of a boxes of ammunition and Such it looks great either way I just think it would bring it all togethereddiesolo wrote:Big update on this.
Got the lower hull sorted, added electrics, gearboxes etc, got the metal sprockets and idlers on and all the road wheels so now have a rolling chassis. Just got to do some weathering on the lower hull.
Got the top section, with the quick release system sorted as one of the clips was sticking but the two marry up now.
Got my other Tiger out to show the comparison, I think it works rather well.
https://scontent-lht6-1.xx.fbcdn.net/v/ ... e=59F93EBA
https://scontent-lht6-1.xx.fbcdn.net/v/ ... e=5A2BC728
https://scontent-lht6-1.xx.fbcdn.net/v/ ... e=5A312AF9
https://scontent-lht6-1.xx.fbcdn.net/v/ ... e=59F684E0
https://scontent-lht6-1.xx.fbcdn.net/v/ ... e=5A337EEE
https://scontent-lht6-1.xx.fbcdn.net/v/ ... e=5A394AB6
https://scontent-lht6-1.xx.fbcdn.net/v/ ... e=5A24DE3E
Si:)
Tanks alot....