1/6 STUART proportional electronics

Talk about all other types of electronics here, such as batteries!
Post Reply
jeepster1118
Recruit
Posts: 1
Joined: Mon Dec 24, 2012 4:54 am

1/6 STUART proportional electronics

Post by jeepster1118 »

I have gutted the old electronics in the Stuart to make it proportional. I am a novice with RC so I hope you can help. I have the standard 6 channel TX and Rx, I bought a Pololu TRex Duel Motor controller and a Benedini TBS mini for sound. My question is do I need a board like a Tamiya DMD or a Clark board to run it. I am thinking the power for both the receiver and the engines will come from the 12v PB battery. Is this assumption correct? Thanks for your input.

Jeepster1118
Post Reply

Return to “Other electronics”