Would this transmitter work with a clark TK22 board?

AshMann · Post by **AshMann** » Sat Apr 22, 2017 8:15 am

I have been looking for a 4CH transmitter that i could use with the clark TK22, i found this one, pretty affordable, i was wondering if it would work with the board... https://hobbyking.com/en_us/hobby-king- ... ode-2.html

silversurfer1947 · Post by **silversurfer1947** » Sat Apr 22, 2017 9:10 am

To the best of my knowledge and belief, any 4 channel Tx and matching receiver can be used to control a Clark TK22.

ruben2005 · Post by **ruben2005** » Sat Apr 22, 2017 9:10 am

hi yes it should as i have this with my ibu good little radio set-up

AshMann · Post by **AshMann** » Sat Apr 22, 2017 12:35 pm

silversurfer1947 wrote:To the best of my knowledge and belief, any 4 channel Tx and matching receiver can be used to control a Clark TK22.

Ah okay, thanks for telling me

wibblywobbly · Post by **wibblywobbly** » Sat Apr 22, 2017 3:07 pm

Just a word to anyone who is contemplating trying the TCB Open Panzer board. I did a bit of reading, and discovered that this board will only work with the transmitters/receivers listed. The reason for this is that it doesn't use the standard 4-6 channel receivers that we all use to hook up our tanks. Instead it uses the latest receivers that are used by the quadcopter hobbyists that give you multiple channels from a single plug. If you don't have one of the listed tx's then you can't use the TCB. It's not a problem if you already have one but if you don't, then you can add a new tx to the list of items that you will need to make use of the board.

MichaelC · Post by **MichaelC** » Sat Apr 22, 2017 3:07 pm

Yes indeed paired this radio with lots of Clark boards. The receiver will also work with the Turnigy 9X radio from HobbyKing as well.

Post by **maxmekker** » Sat Apr 22, 2017 5:14 pm

AshMann wrote:I have been looking for a 4CH transmitter that i could use with the clark TK22, i found this one, pretty affordable, i was wondering if it would work with the board... https://hobbyking.com/en_us/hobby-king- ... ode-2.html

Even if the video show TK60 Board it works nicely with both the tk 24 and 22. No problem. I like to use MODE1 radio, to keep the stick layout as close to the layout on Clarks webpage

phpBB [video]

c.rainford73 · Post by **c.rainford73** » Sat Apr 22, 2017 8:10 pm

Hi Ash Man

nice to see you back! Glad to know your adding a Clark board to a project wich one of your tanks is getting it?

AshMann · Post by **AshMann** » Sat Apr 22, 2017 11:03 pm

c.rainford73 wrote:Hi Ash Man nice to see you back! Glad to know your adding a Clark board to a project wich one of your tanks is getting it?

my sherman tank is getting it, the KV 1 and M1A1 abrams I have aren't compatible with the board

c.rainford73 · Post by **c.rainford73** » Sat Apr 22, 2017 11:25 pm

Sounds good Ash Man. Is your Sherman IR or airsoft? Do you have pictures of the Sherman?

RC Tank Warfare community hobby forum

Would this transmitter work with a clark TK22 board?

Would this transmitter work with a clark TK22 board?

Re: Would this transmitter work with a clark TK22 board?

Re: Would this transmitter work with a clark TK22 board?

Re: Would this transmitter work with a clark TK22 board?

Re: Would this transmitter work with a clark TK22 board?

Re: Would this transmitter work with a clark TK22 board?

Re: Would this transmitter work with a clark TK22 board?

Re: Would this transmitter work with a clark TK22 board?

Re: Would this transmitter work with a clark TK22 board?

Re: Would this transmitter work with a clark TK22 board?