Torro M16.
Forum rules
If your question is electronics related please post it in one of the relevant boards here: viewforum.php?f=31
If your question is electronics related please post it in one of the relevant boards here: viewforum.php?f=31
-
Jake79
- Warrant Officer 2nd Class
- Posts: 1058
- Joined: Mon Aug 11, 2014 9:10 pm
- Location: Essex,Colchester, UK
Re: Torro M16.
Hi Shaun, I thought the elmod could only take the one 8 Ohm speaker..the reason being I know Del bought an elmod for his Leo and he wanted two speaker set up. To achieve this he had to connect the two 4ohm's together as he couldn't have two 8's.
Tamiya: 2 King Tigers
H/L,Taigen :Initial Tiger 1, Panzer III, Kv 2, Panther G, Bulldog, Leo 2A6
H/L,Taigen :Initial Tiger 1, Panzer III, Kv 2, Panther G, Bulldog, Leo 2A6
-
jarndice
- Colonel
- Posts: 8403
- Joined: Mon Sep 03, 2012 11:27 am
- Location: the mountains of hertfordshire
Re: Torro M16.
Jake Thank you,
Not what I wanted to hear but better to know now than to find out the hard way,
It is exactly why I asked.
Shaun.
Not what I wanted to hear but better to know now than to find out the hard way,
It is exactly why I asked.
Shaun.
I think I am about to upset someone 
-
jarndice
- Colonel
- Posts: 8403
- Joined: Mon Sep 03, 2012 11:27 am
- Location: the mountains of hertfordshire
Re: Torro M16.
I have just ordered an IBU RVC from Ian for my M16s "Elmod" Board,
I knew it was a good idea to use a receiver with more than 4 channels
The only downside is Ian (TANKBEAR) is away until May 1st.
Shaun.
I knew it was a good idea to use a receiver with more than 4 channels
The only downside is Ian (TANKBEAR) is away until May 1st.
Shaun.
I think I am about to upset someone
-
jackalope
- Lieutenant
- Posts: 3882
- Joined: Fri Jun 20, 2014 7:42 pm
- Location: Communist State of Maryland, United States.
Re: Torro M16.
I didn't know IBU made a board to fit the M16?
-
jarndice
- Colonel
- Posts: 8403
- Joined: Mon Sep 03, 2012 11:27 am
- Location: the mountains of hertfordshire
Re: Torro M16.
Hi Jack, The IBU RVC is the Remote Volume Control that I will plug into the "Elmod" board at one end and the "Turnigy" Receiver at the other to replace the "Elmod" provided potentiometer,
Which is why instead of the recommended 4 channel receiver I am pleased I am using a regular 8 channel with my "Turnigy TGY9 X",
I always prefer to use the transmitter to give me control of the sound rather than having to adjust it at the Tank/Halftrack.
Shaun.
Which is why instead of the recommended 4 channel receiver I am pleased I am using a regular 8 channel with my "Turnigy TGY9 X",
I always prefer to use the transmitter to give me control of the sound rather than having to adjust it at the Tank/Halftrack.
Shaun.
I think I am about to upset someone
-
jackalope
- Lieutenant
- Posts: 3882
- Joined: Fri Jun 20, 2014 7:42 pm
- Location: Communist State of Maryland, United States.
Re: Torro M16.
Oh......thanks man. Sorry. 
