Gig's 1:16 FCM F1

[PainlessWolf]

Good morning, Giganaut!,
What cement are you using to build that? ( Also, kinda swinging back around to the Torro for the new KV-2 since someone put them on sale ;o) (IMEX)
regards,
Painless

[Giganaut]

Good morning, Giganaut!,
What cement are you using to build that? ( Also, kinda swinging back around to the Torro for the new KV-2 since someone put them on sale ;o) (IMEX)
regards,
Painless

the type of material i used is the standard PLA plastic. i have not used cement to put this together but tape for now. just wanted to see how it looked after being pieced together

[Giganaut]

done with the right side of the hull wall and now moving on to the floor and mounting. the turrets are just size comparison and just for fun hahahahaha

[Giganaut]

i am basically finished with the hull and now to print the hull's suspension and the power pack housing

[Giganaut]

finished on the main hull structure and added frame and points of mounting gearbox platform.

onwards to do the powerpack housing. on both sidds

[Giganaut]

progress

[Ad Lav]

Looking good! Passing the time playing wot too

[PainlessWolf]

Giganaut,
It's definitely coming to life. How is internal usable space looking vs enough bracing to keep that long hull rigid? If it's the same material that you printed the KV-2 turret out of, that stuff is stout.
regards,
Painless

P.S. A Torro KV-2 is on it's way from IMEX for the 1939 version build. ;o)

[Giganaut]

Looking good! Passing the time playing wot too

i lovE MY m6a2e1, total troll wagon

[Giganaut]

Giganaut,
It's definitely coming to life. How is internal usable space looking vs enough bracing to keep that long hull rigid? If it's the same material that you printed the KV-2 turret out of, that stuff is stout.
regards,
Painless

P.S. A Torro KV-2 is on it's way from IMEX for the 1939 version build. ;o)

all of my prints are made with PLA plastic heheh yes