IBU3
Re: IBU3
I've not come across this issue and as away on holiday hard to test myself at moment.
What happens if you try using a different run sound?
What happens if you try using a different run sound?
www.mad-tanks.weebly.com
www.rctankelectronics.com
www.rc-truck.weebly.com
www.rc-boat.weebly.com
www.rctankelectronics.com
www.rc-truck.weebly.com
www.rc-boat.weebly.com
Re: IBU3
Same thing ( used 50cal) - no sound plays until stick is released and then the engine idle kicks in.Tankbear wrote:I've not come across this issue and as away on holiday hard to test myself at moment.
What happens if you try using a different run sound?
I scrubbed everything, unzipped the sounds, configured the board, but switched the stick assignments - same issue on sound.
Enjoy your vacation and we'll play when you get back - maybe my i10 will be back then also
Re: IBU3
Maybe try flashing the firmware, it will erase everything so you need to go through setup again.
Hardware must be okay as working for other sounds, so maybe a glitch in the firmware when writing to ibu3 at manufacturing.
Hardware must be okay as working for other sounds, so maybe a glitch in the firmware when writing to ibu3 at manufacturing.
www.mad-tanks.weebly.com
www.rctankelectronics.com
www.rc-truck.weebly.com
www.rc-boat.weebly.com
www.rctankelectronics.com
www.rc-truck.weebly.com
www.rc-boat.weebly.com
Re: IBU3
Didn't change anything.Tankbear wrote:Maybe try flashing the firmware, it will erase everything so you need to go through setup again.
Hardware must be okay as working for other sounds, so maybe a glitch in the firmware when writing to ibu3 at manufacturing.
More playing - I noticed that I can have the turret rotation sound (engine running) but not the cannon elevation/depression sound - get cannon fire...same for engine off.
So both sticks seem to not do the double duty sound in the up/down scenario???
Re: IBU3
Very odd. Could the radio have some mixing of channels going on and confusing the ibu3?
www.mad-tanks.weebly.com
www.rctankelectronics.com
www.rc-truck.weebly.com
www.rc-boat.weebly.com
www.rctankelectronics.com
www.rc-truck.weebly.com
www.rc-boat.weebly.com
-
- Recruit
- Posts: 4
- Joined: Tue Apr 19, 2016 10:02 pm
Re: IBU3
Hi lads,ok new to the furums,so have patience .and new to the ibu3 i got mine last week,being newby i need help, how do you load the sound files to the sound board. when i use the configurtor{ cold start} try to load file, go to the files click on tiger 1 file, open it but nothing shows up ? ,do i have to put the file in a pacific place ? wat is the rutine ,can you help thanks
-
- Recruit
- Posts: 4
- Joined: Tue Apr 19, 2016 10:02 pm
Re: IBU3
Hi thanks for answering my problem, I can open the files ok by clicking but when iuse ths IBU 3 calibrator tfloo open he files
It shows a emty folder and can not access them,
It shows a emty folder and can not access them,