rockets

Non-RC planes can be posted here, however big or small!
Post Reply
doc larsson
Staff Sergeant
Posts: 829
Joined: Sat Sep 29, 2012 5:05 pm

rockets

Post by doc larsson »

Hi

finishing off a seafire fr47 with folding wings and was wondering, would the aircraft be prepped with arms etc below decks and the outer wings lowered above deck ? Would the wings hydraulics etc be strong enough to have rockets mounted on the folded-up wings ?

cheers.
ps just bought a 1/24 spit as well !
User avatar
Merlin707
Corporal
Posts: 457
Joined: Sun Oct 26, 2014 1:10 am
Location: Lincoln
Contact:

Re: rockets

Post by Merlin707 »

Hi Doc,

To answer your question, yes all arming and re-fuelling was done below decks so as to keep the upper decks clear from clutter in case of an emergency scramble or landing.

The wing hydraulics were that powerful that they could lift a fully laden car if so perched.

Hope that helps.
Razor 1, Intercept Bogies Angels 2 5, Cleared Hot Engage, Fox 2 Fox 2

Semper In Faecibus Sumus Sole Profundum Variat

HL/Tamiya Sherman - Bulldog Turreted
Taigen Tiki Tiger 1
Torro KingTiger
E-25 Tank Destroyer
doc larsson
Staff Sergeant
Posts: 829
Joined: Sat Sep 29, 2012 5:05 pm

Re: rockets

Post by doc larsson »

cheers merlin

one other question.when finished painting should i varnish before applying decals and varnish again afterwards.and what varnish matt ?
User avatar
Merlin707
Corporal
Posts: 457
Joined: Sun Oct 26, 2014 1:10 am
Location: Lincoln
Contact:

Re: rockets

Post by Merlin707 »

Matt varnish your decals first then varnish the whole thing.

Don't forget if you are having the wings up, you need to put hydraulic leakage stains on the under wing near the connection point as these used to leak like a sieve.

Use gloss varnish as the were painted gloss to aid airflow slippage and aerodynamics.
Razor 1, Intercept Bogies Angels 2 5, Cleared Hot Engage, Fox 2 Fox 2

Semper In Faecibus Sumus Sole Profundum Variat

HL/Tamiya Sherman - Bulldog Turreted
Taigen Tiki Tiger 1
Torro KingTiger
E-25 Tank Destroyer
brizo58
Warrant Officer 2nd Class
Posts: 1324
Joined: Mon Jan 18, 2010 3:35 pm
Location: Romford.Essex

Re: rockets

Post by brizo58 »

Hi Doc,
If you have painted the airframe gloss the decals will go straight on but if it's Matt you will have to gloss varnish it first then put the decals on when dry a coat of Matt varnish. I'm in the process of doing my 24th typhoon :thumbup: lots of rockets on her :haha:. Brian...
ALPHA
Major-General
Posts: 10963
Joined: Thu Oct 03, 2013 1:06 am

Re: rockets

Post by ALPHA »

One of my favorite configurations of the Spit


Image
this one you can see the racks small load...looks like two per wing..or one bomb on either side

As far as the decals go...yeah pretty much what everyone says...gloss sealer ...then decal...the flat overcoat ;)

ALPHA
User avatar
dgsselkirk
Warrant Officer 2nd Class
Posts: 1484
Joined: Tue Oct 16, 2012 1:57 am
Location: Kitchener, Ontario, Canada
Contact:

Re: rockets

Post by dgsselkirk »

Use acrylic floor polish for the sealer. It's much cheaper and runs through an airbrush straight away no thinner. Then decals and then what ever finish you want to use as the last coat.
"There are things in Russia which are not as they seem..."
Georgy Konstantinovich Zhukov
Post Reply

Return to “Planes”