Expereinces with TK-CS16?
Posted: Tue Jun 14, 2022 8:03 pm
I want Servo recoil to replace my BB turret I have decided.
I could go TK7.1 to replace my TK7.0 (that in my Tiger came with a nice leopard Diesel sound...) but after some digging the 7.0 and 7.1 transcievers are different, and if you want to use the extra channel to work you need the 7.1 TX with the working slider. At this point its the best part of £100 for 7.1 board and TX shipped to "Brexit Island" which seems a lot for not a lot.
So I am looking at boards, Beier and Elmod are a bit pricey for me as a beginer. The Clark seems to have quality issues, and the OpenPanzer unobtainable it seems. I saw on another forum Rad is testing a new board based on OpenPanzer but its new product and likely €200 or more.
So I started to look at other boards that support generic TX/RX as that gives the most options. The Taigen V3 is one option (keep coming back to should have bought a Taigen not HL!), but after much research I came accross the TK-CS16 board, and the thread on connections: viewtopic.php?f=81&t=32082
I don't need stabilised barrell in a Tiger (youtube makes it look cool in a modern tank!), but the rest seems a good mix of every connection you could need without the cost and advanced sound functions of Beier/Elmod etc level board.
Can't seem to find a lot of information on English forums, is anyone using these boards, if so how do you like them?
I could go TK7.1 to replace my TK7.0 (that in my Tiger came with a nice leopard Diesel sound...) but after some digging the 7.0 and 7.1 transcievers are different, and if you want to use the extra channel to work you need the 7.1 TX with the working slider. At this point its the best part of £100 for 7.1 board and TX shipped to "Brexit Island" which seems a lot for not a lot.
So I am looking at boards, Beier and Elmod are a bit pricey for me as a beginer. The Clark seems to have quality issues, and the OpenPanzer unobtainable it seems. I saw on another forum Rad is testing a new board based on OpenPanzer but its new product and likely €200 or more.
So I started to look at other boards that support generic TX/RX as that gives the most options. The Taigen V3 is one option (keep coming back to should have bought a Taigen not HL!), but after much research I came accross the TK-CS16 board, and the thread on connections: viewtopic.php?f=81&t=32082
I don't need stabilised barrell in a Tiger (youtube makes it look cool in a modern tank!), but the rest seems a good mix of every connection you could need without the cost and advanced sound functions of Beier/Elmod etc level board.
Can't seem to find a lot of information on English forums, is anyone using these boards, if so how do you like them?