TORRO RX18 cannot bind to transmitter

Talk about all other types of electronics here, such as batteries!
kintaroukinji
Lance Corporal
Posts: 156
Joined: Mon Feb 19, 2018 4:46 am

Re: TORRO RX18 cannot bind to transmitter

Post by kintaroukinji »

Rad_Schuhart wrote:I think you can contact Beier, they probably have the answers for this. They are fast answering emails.
Thank you for reply. I asked Beier if there was such a case, but the response was as follows.

we have never heard of such a problem from any other customer.

The USM-HL-2 only listens to the signals from the receiver. However, it does not change the signals and does not send any signals into the RX-18.

I'm sorry, but I don't have any advice for you on how the binding could work again. I would have suggested disconnect the USM-HL-2 from the RX-18, but you've already done that.

After all, I have to buy a new TORRO transmitter and RX18 (ver.1).
Post Reply

Return to “Other electronics”