ID help, please: what have I here?
- Herr Dr. Professor
- Lieutenant
- Posts: 3621
- Joined: Mon Apr 22, 2019 10:48 pm
- Location: Southern Wisconsin USA
ID help, please: what have I here?
Encouraged by my experience with the M10, ( ) I made a haul via a friend of a friend of a friend. Can anyone confirm my guesses about what I have?
1) Is this a Clark board? Is that a receiver or some kind of sound board to the right? The receiver to the left reads Hobby King, but I suspect its a re-branding. Is it?
2) I think this is an Elmod with a Turnigy receiver. Correct?
3) Might this be a Benedini? Is the receiver attached already?
1) Is this a Clark board? Is that a receiver or some kind of sound board to the right? The receiver to the left reads Hobby King, but I suspect its a re-branding. Is it?
2) I think this is an Elmod with a Turnigy receiver. Correct?
3) Might this be a Benedini? Is the receiver attached already?
- Model Builder 4
- 2nd Lieutenant
- Posts: 2329
- Joined: Sun Jul 26, 2015 3:46 pm
- Location: South Wales valleys
- Contact:
Re: ID help, please: what have I here?
Number 3 is an ibu board, no receiver attached
Cheers,Lee
Cheers,Lee
Me ? Addicted ? Never !!
- Herr Dr. Professor
- Lieutenant
- Posts: 3621
- Joined: Mon Apr 22, 2019 10:48 pm
- Location: Southern Wisconsin USA
Re: ID help, please: what have I here?
I also got this unidentified non-flying smoke unit. What is it?
And to boot...a bunch of speakers. That big one should be able to blast out the nearest neighbors two acres of woodland away!
And to boot...a bunch of speakers. That big one should be able to blast out the nearest neighbors two acres of woodland away!
- Model Builder 4
- 2nd Lieutenant
- Posts: 2329
- Joined: Sun Jul 26, 2015 3:46 pm
- Location: South Wales valleys
- Contact:
- Herr Dr. Professor
- Lieutenant
- Posts: 3621
- Joined: Mon Apr 22, 2019 10:48 pm
- Location: Southern Wisconsin USA
Re: ID help, please: what have I here?
Thanks, Lee! That's one down! Yay, Lee: that's another with the Tarr Smoker identified. Thanks again and again!
Last edited by Herr Dr. Professor on Thu Mar 25, 2021 5:03 pm, edited 1 time in total.
Re: ID help, please: what have I here?
Hi,
the first Picture:
Benedini TBS Mini
Clark TK-20
the second Picture:
Elmod Fusion
the third Picture:
IBU v2
the first Picture:
Benedini TBS Mini
Clark TK-20
the second Picture:
Elmod Fusion
the third Picture:
IBU v2
- Herr Dr. Professor
- Lieutenant
- Posts: 3621
- Joined: Mon Apr 22, 2019 10:48 pm
- Location: Southern Wisconsin USA
Re: ID help, please: what have I here?
Great! Thank you jhamm! I knew folks on RCTW would nail it right away: I didn't think it would be within less than five minutes! Way to go!
- Herr Dr. Professor
- Lieutenant
- Posts: 3621
- Joined: Mon Apr 22, 2019 10:48 pm
- Location: Southern Wisconsin USA
Re: ID help, please: what have I here?
Now I can start a debate.
A) Is there a transmitter that would handle all four of the boards and receivers?
B) I would guess (hope! ) that I should be able download software by which to program these boards, no? (If not, my "haul" is a hee-haw. )
A) Is there a transmitter that would handle all four of the boards and receivers?
B) I would guess (hope! ) that I should be able download software by which to program these boards, no? (If not, my "haul" is a hee-haw. )
- Rad_Schuhart
- Warrant Officer 1st Class
- Posts: 1989
- Joined: Tue Jan 19, 2016 9:22 am
- Location: Spanish living in Graz, Austria. Heart in UK.
- Contact:
Re: ID help, please: what have I here?
A) Any transmitter will do. Better aprogrammable one like the radiomaster.Herr Dr. Professor wrote:Now I can start a debate.
A) Is there a transmitter that would handle all four of the boards and receivers?
B) I would guess (hope! ) that I should be able download software by which to program these boards, no? (If not, my "haul" is a hee-haw. )
B) yes, indeed there are softwares for that. The elmod free to download at elmod website, the benedini as well after you contact him, the ibu 2 does not needit.
My RC tanks website, loads of free info for everybody:
https://radindustries.wordpress.com/
https://radindustries.wordpress.com/
- Herr Dr. Professor
- Lieutenant
- Posts: 3621
- Joined: Mon Apr 22, 2019 10:48 pm
- Location: Southern Wisconsin USA
Re: ID help, please: what have I here?
I have bookmarked the web sites for various RC electronics manufacturers, and I need to spend time looking through them to see what I can learn. I will see what I can learn about Radiomaster, too. I wish there were an RC Tank Club around here where I might pester experienced tankers for edu-ma-ca-shun. However, I am experience at learning by reading and trial-and-error.