ID help, please: what have I here?

Talk about all other types of electronics here, such as batteries!
Post Reply
User avatar
Herr Dr. Professor
Lieutenant
Posts: 3456
Joined: Mon Apr 22, 2019 10:48 pm
Location: Southern Wisconsin USA

ID help, please: what have I here?

Post by Herr Dr. Professor »

Encouraged by my experience with the M10, ( :lolno:) I made a haul via a friend of a friend of a friend. Can anyone confirm my guesses about what I have?

1) Is this a Clark board? Is that a receiver or some kind of sound board to the right? The receiver to the left reads Hobby King, but I suspect its a re-branding. Is it?
Hobby King.jpg
2) I think this is an Elmod with a Turnigy receiver. Correct?
Elmod Turnigy.jpg
3) Might this be a Benedini? Is the receiver attached already?
Benedini.jpg
User avatar
Model Builder 4
2nd Lieutenant
Posts: 2329
Joined: Sun Jul 26, 2015 3:46 pm
Location: South Wales valleys
Contact:

Re: ID help, please: what have I here?

Post by Model Builder 4 »

Number 3 is an ibu board, no receiver attached :thumbup:

Cheers,Lee
Me ? Addicted ? Never !! :crazy:
User avatar
Herr Dr. Professor
Lieutenant
Posts: 3456
Joined: Mon Apr 22, 2019 10:48 pm
Location: Southern Wisconsin USA

Re: ID help, please: what have I here?

Post by Herr Dr. Professor »

I also got this unidentified non-flying smoke unit. What is it?
Smoke Unit.jpg
And to boot...a bunch of speakers. That big one should be able to blast out the nearest neighbors two acres of woodland away!
Speakers.jpg
User avatar
Model Builder 4
2nd Lieutenant
Posts: 2329
Joined: Sun Jul 26, 2015 3:46 pm
Location: South Wales valleys
Contact:

Re: ID help, please: what have I here?

Post by Model Builder 4 »

It is a tarr smoker :thumbup:

Cheers,Lee.
Me ? Addicted ? Never !! :crazy:
User avatar
Herr Dr. Professor
Lieutenant
Posts: 3456
Joined: Mon Apr 22, 2019 10:48 pm
Location: Southern Wisconsin USA

Re: ID help, please: what have I here?

Post by Herr Dr. Professor »

Thanks, Lee! That's one down! Yay, Lee: that's another with the Tarr Smoker identified. Thanks again and again!
Last edited by Herr Dr. Professor on Thu Mar 25, 2021 5:03 pm, edited 1 time in total.
User avatar
jhamm
Staff Sergeant
Posts: 950
Joined: Fri May 19, 2017 7:21 am
Location: Germany
Contact:

Re: ID help, please: what have I here?

Post by jhamm »

Hi,
the first Picture:
Benedini TBS Mini
Clark TK-20

the second Picture:
Elmod Fusion

the third Picture:
IBU v2
User avatar
Herr Dr. Professor
Lieutenant
Posts: 3456
Joined: Mon Apr 22, 2019 10:48 pm
Location: Southern Wisconsin USA

Re: ID help, please: what have I here?

Post by Herr Dr. Professor »

Great! Thank you jhamm! I knew folks on RCTW would nail it right away: I didn't think it would be within less than five minutes! Way to go!
User avatar
Herr Dr. Professor
Lieutenant
Posts: 3456
Joined: Mon Apr 22, 2019 10:48 pm
Location: Southern Wisconsin USA

Re: ID help, please: what have I here?

Post by Herr Dr. Professor »

Now I can start a debate.

A) Is there a transmitter that would handle all four of the boards and receivers?

B) I would guess (hope! 8O ) that I should be able download software by which to program these boards, no? (If not, my "haul" is a hee-haw. :sick: )
User avatar
Rad_Schuhart
Warrant Officer 1st Class
Posts: 1979
Joined: Tue Jan 19, 2016 9:22 am
Location: Spanish living in Graz, Austria. Heart in UK.
Contact:

Re: ID help, please: what have I here?

Post by Rad_Schuhart »

Herr Dr. Professor wrote:Now I can start a debate.

A) Is there a transmitter that would handle all four of the boards and receivers?

B) I would guess (hope! 8O ) that I should be able download software by which to program these boards, no? (If not, my "haul" is a hee-haw. :sick: )
A) Any transmitter will do. Better aprogrammable one like the radiomaster.

B) yes, indeed there are softwares for that. The elmod free to download at elmod website, the benedini as well after you contact him, the ibu 2 does not needit.
My RC tanks website, loads of free info for everybody:
https://radindustries.wordpress.com/
User avatar
Herr Dr. Professor
Lieutenant
Posts: 3456
Joined: Mon Apr 22, 2019 10:48 pm
Location: Southern Wisconsin USA

Re: ID help, please: what have I here?

Post by Herr Dr. Professor »

I have bookmarked the web sites for various RC electronics manufacturers, and I need to spend time looking through them to see what I can learn. I will see what I can learn about Radiomaster, too. I wish there were an RC Tank Club around here where I might pester experienced tankers for edu-ma-ca-shun. However, I am experience at learning by reading and trial-and-error.
Post Reply

Return to “Other electronics”