Hope somebody can help. When I took the top off my newly acquired KV1 two wires with two pin connectors on the end came adrift. There is a red/white combination and a red/black combination. I think I got the red/white wires from the smoke unit back in the correct place, although I could be wrong. However, I can not find another socket anywhere for the red/black wires from the turret to go. Any advice gratefully received.
Eric
KV1 wiring
Re: KV1 wiring
They are for microswitch on the back of the BB gun
Re: KV1 wiring
Thanks John, much appreciated.
Its no wonder I was confused as I was looking for a two pin socket for the two pin connector when it actually goes in a five pin slot.
Thanks again
Eric
Its no wonder I was confused as I was looking for a two pin socket for the two pin connector when it actually goes in a five pin slot.
Thanks again
Eric
- General Jumbo01
- Warrant Officer 1st Class
- Posts: 1765
- Joined: Sat Jul 14, 2018 8:06 pm
- Location: I'm a Londoner that moved to Essex. Says it all really...:(
Re: KV1 wiring
That 5 pin socket comes into play when you go down the barrel flash route, a very low cost enhancement if you are running with the IR battling system.
Owner - Fuckleburgh Tank Collection