KV1 wiring

Talk about all other types of electronics here, such as batteries!
Post Reply
H2Eric
Recruit
Posts: 2
Joined: Mon Dec 14, 2020 10:48 am

KV1 wiring

Post by H2Eric »

Hope somebody can help. When I took the top off my newly acquired KV1 two wires with two pin connectors on the end came adrift. There is a red/white combination and a red/black combination. I think I got the red/white wires from the smoke unit back in the correct place, although I could be wrong. However, I can not find another socket anywhere for the red/black wires from the turret to go. Any advice gratefully received.
Eric
Attachments
IMG_0822 (1).jpg
john1970
Corporal
Posts: 372
Joined: Sun Jun 02, 2013 2:29 pm

Re: KV1 wiring

Post by john1970 »

They are for microswitch on the back of the BB gun

Image
H2Eric
Recruit
Posts: 2
Joined: Mon Dec 14, 2020 10:48 am

Re: KV1 wiring

Post by H2Eric »

Thanks John, much appreciated.
Its no wonder I was confused as I was looking for a two pin socket for the two pin connector when it actually goes in a five pin slot.
Thanks again
Eric
User avatar
General Jumbo01
Warrant Officer 1st Class
Posts: 1765
Joined: Sat Jul 14, 2018 8:06 pm
Location: I'm a Londoner that moved to Essex. Says it all really...:(

Re: KV1 wiring

Post by General Jumbo01 »

That 5 pin socket comes into play when you go down the barrel flash route, a very low cost enhancement if you are running with the IR battling system.
Owner - Fuckleburgh Tank Collection
Post Reply

Return to “Other electronics”