Hi all, just fitted these into a tiger 1, excellent results with a nice slow controllable speed, also fitted
rivnuts to the metal baseplate that the gearboxes normally screw onto, the gearboxes now are bolted firmly in position, bit of mare to start with as the motors were a sort of interference fit, ground a couple of mm from the shaft on the motor end bell but I am happy with the end result
Igarashi N2738-51 Motors
-
- Staff Sergeant
- Posts: 769
- Joined: Sat Oct 29, 2016 8:57 pm
- Location: Retford Nottinghamshire
Igarashi N2738-51 Motors
Last edited by Ludwig von wigbearer on Thu Oct 08, 2020 5:52 pm, edited 1 time in total.
-
- Staff Sergeant
- Posts: 769
- Joined: Sat Oct 29, 2016 8:57 pm
- Location: Retford Nottinghamshire
-
- Staff Sergeant
- Posts: 769
- Joined: Sat Oct 29, 2016 8:57 pm
- Location: Retford Nottinghamshire
-
- Staff Sergeant
- Posts: 769
- Joined: Sat Oct 29, 2016 8:57 pm
- Location: Retford Nottinghamshire