Taigen V3

Talk about all other types of electronics here, such as batteries!
Jofaur86
Warrant Officer 1st Class
Posts: 1663
Joined: Tue Dec 25, 2018 11:28 pm
Location: Centre France

Taigen V3

Post by Jofaur86 »

Hello :D
Following the purchase of a Taigen V3 type module,to replace the original RX 18,and use wiht a conventionel radio (Flishky FS6 T ) as indicated? :( nothing happens :thumbdown: and moreover no help,thank king you in advance :thumbup: good day.
PS: no explanatory note :(
Jofaur86
Warrant Officer 1st Class
Posts: 1663
Joined: Tue Dec 25, 2018 11:28 pm
Location: Centre France

Re: Taigen V3

Post by Jofaur86 »

Hello, :D
No one hase the answers or already had this problem 8O ???
john1970
Corporal
Posts: 372
Joined: Sun Jun 02, 2013 2:29 pm

Re: Taigen V3

Post by john1970 »

User avatar
tomhugill
Captain
Posts: 4745
Joined: Thu Apr 15, 2010 11:21 am

Re: Taigen V3

Post by tomhugill »

Jofaur86 wrote:Hello, :D
No one hase the answers or already had this problem 8O ???
Did you put the little bind plug in?
Jofaur86
Warrant Officer 1st Class
Posts: 1663
Joined: Tue Dec 25, 2018 11:28 pm
Location: Centre France

Re: Taigen V3

Post by Jofaur86 »

OK,thank you for the answer :D but that doesn't tell me why the deck doesn't power the RX? While the fan is running
Jofaur86
Warrant Officer 1st Class
Posts: 1663
Joined: Tue Dec 25, 2018 11:28 pm
Location: Centre France

Re: Taigen V3

Post by Jofaur86 »

Tomhugill :D
Yes :thumbup:
Jofaur86
Warrant Officer 1st Class
Posts: 1663
Joined: Tue Dec 25, 2018 11:28 pm
Location: Centre France

Re: Taigen V3

Post by Jofaur86 »

I do not understand ? Already watched this vidéo,they use a RX Flysky ,but a Taigen transmitter :crazy:
john1970
Corporal
Posts: 372
Joined: Sun Jun 02, 2013 2:29 pm

Re: Taigen V3

Post by john1970 »

Image
Jofaur86
Warrant Officer 1st Class
Posts: 1663
Joined: Tue Dec 25, 2018 11:28 pm
Location: Centre France

Re: Taigen V3

Post by Jofaur86 »

Thank you for diagram !! I have to connect according to diagram??but my concern is that the fan turns ?and that on my receiver the led does not ligth ? 8O up and that everything works, with servos ? Moreover i do not understand that on the vidéo?a Taigen transmitter is used so I would like to know if it works with a radio set other than Taigen ? And why my RX does not turn on :wtf:
john1970
Corporal
Posts: 372
Joined: Sun Jun 02, 2013 2:29 pm

Re: Taigen V3

Post by john1970 »

connect as in diagram put in your transmitter selection plug number 1 in diagram your rx should be power by the taigen board as it says it has a built in bec if not then i dont know
Post Reply

Return to “Other electronics”