Beier usm hl 2 and lights outputs

Talk about all other types of electronics here, such as batteries!
Post Reply
Lo_Thar
Lance Corporal
Posts: 223
Joined: Fri Aug 03, 2018 12:56 pm
Location: Poland

Beier usm hl 2 and lights outputs

Post by Lo_Thar »

Hey, can somebody help me with lamps in beiers? You can set on / off a few lamps in beier sound module, i need two - front and rear. The instructions are only in German; (
User avatar
easy8
Private
Posts: 81
Joined: Wed Apr 04, 2018 2:52 pm
Location: Venlo, the Netherlands

Re: Beier usm hl 2 and lights outputs

Post by easy8 »

Lo_Thar
Lance Corporal
Posts: 223
Joined: Fri Aug 03, 2018 12:56 pm
Location: Poland

Re: Beier usm hl 2 and lights outputs

Post by Lo_Thar »

I know, i connect X1 - 8(red cabble) with X3 - for example brown - unput 1. But i dont understand how to make commbinations on transmiter in program to turn it on/off
Lo_Thar
Lance Corporal
Posts: 223
Joined: Fri Aug 03, 2018 12:56 pm
Location: Poland

Re: Beier usm hl 2 and lights outputs

Post by Lo_Thar »

[quote="Lo_Thar"]I know, i connect X1 - 8(red cabble) with X3 - for example brown - output 1. But i dont understand how to make commbinations on transmiter in program to turn it on/off
User avatar
easy8
Private
Posts: 81
Joined: Wed Apr 04, 2018 2:52 pm
Location: Venlo, the Netherlands

Re: Beier usm hl 2 and lights outputs

Post by easy8 »

According the manual you need the Sound Teacher software to instruct the module how to react on the transmitter: eg. a switch on a transmitter turns on/off the taillights or an other switch on the transmitter switches on or off a smoker.The manual tells you how to install the Sound Teacher software. Good luck.

Easy8
Lo_Thar
Lance Corporal
Posts: 223
Joined: Fri Aug 03, 2018 12:56 pm
Location: Poland

Re: Beier usm hl 2 and lights outputs

Post by Lo_Thar »

Ahhh i fount it - output can be instal in receiver section instead of voices ;P
Post Reply

Return to “Other electronics”